The code I linked to is a library/api that someone else wrote. I was using it to write a proper weewx driver. Unfortunately I didn't get too far before my sensor failed.
I really like Lufft hardware but this is the second time I've had a sensor fail. I think I'm going to give a Vaisala WXT536 a try. On Monday, May 13, 2019 at 1:19:54 AM UTC-5, Stefan Schnidrig wrote: > > Hello Andrew. > I have 3 air weather stations. Had also 2 hardware failures of the sensor > WS600 UMB. > After a long discussion with the company Lufft you have now replaced me. > I have now purchased 3 Lufft wind sensors (Ventus-X) as the weather stations > are installed at a height of 2300 - 3500m. > Was the pyton clean or were there failures? I will test this time and hope it > works. That would be perfect. Thank you for your mail. > Greeting Stefan > > > > Am Montag, 13. Mai 2019 06:44:48 UTC+2 schrieb Andrew B: >> >> I was in the middle of writing a Lufft driver this weekend and the WS500 >> that I was using for testing died on me. This is the second sudden failure >> I've experienced with Lufft hardware over the past couple of months. So I >> think I'm going to investigate other hardware. >> >> If anyone still wants to write a driver for Lufft hardware, this will >> save you a lot of time: >> https://github.com/Tasm-Devil/lufft-python >> >> On Wednesday, May 8, 2019 at 12:31:13 PM UTC-5, Stefan Schnidrig wrote: >>> >>> Hi Guys. >>> Can someone tell me whether the weewx system also supports the weather >>> stations of the company LUFFT (www.lufft.com)? These are supplied with a >>> Modbus and RS485 readout. I prefer the RS485, as it is easier. If this >>> works, what do you need to set in weewx to be able to read the data? The >>> picture of the sensor you see above in my post. >>> >>> Many Thanks >>> Stefan >>> >>> >>> Am Donnerstag, 25. April 2019 13:35:00 UTC+2 schrieb Stefan Schnidrig: >>>> >>>> Hallo zusammen. >>>> >>>> Kann mir jemand sagen, ob die Wetterstation der Firma LUFFT mit der >>>> RS485 Schnittstelle funktioniert mit Weewx? >>>> >>>> Vielen Dank >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/aa56a6e9-1aaa-4150-83a2-d8497f337664%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
