Do I understand that correctly, that one can read out with this .py file but the Ws500 and others? That would be enough for me for the time being. At the moment it would be only for me to be able to read sensor with weewx. I always had meteohub until now. This supports the WS600 UMB and all their families. Thank you
Am Montag, 13. Mai 2019 09:12:46 UTC+2 schrieb Andrew B: > > The code I linked to is a library/api that someone else wrote. I was using > it to write a proper weewx driver. Unfortunately I didn't get too far > before my sensor failed. > > I really like Lufft hardware but this is the second time I've had a sensor > fail. I think I'm going to give a Vaisala WXT536 a try. > > On Monday, May 13, 2019 at 1:19:54 AM UTC-5, Stefan Schnidrig wrote: >> >> Hello Andrew. >> I have 3 air weather stations. Had also 2 hardware failures of the sensor >> WS600 UMB. >> After a long discussion with the company Lufft you have now replaced me. >> I have now purchased 3 Lufft wind sensors (Ventus-X) as the weather stations >> are installed at a height of 2300 - 3500m. >> Was the pyton clean or were there failures? I will test this time and hope >> it works. That would be perfect. Thank you for your mail. >> Greeting Stefan >> >> >> >> Am Montag, 13. Mai 2019 06:44:48 UTC+2 schrieb Andrew B: >>> >>> I was in the middle of writing a Lufft driver this weekend and the WS500 >>> that I was using for testing died on me. This is the second sudden failure >>> I've experienced with Lufft hardware over the past couple of months. So I >>> think I'm going to investigate other hardware. >>> >>> If anyone still wants to write a driver for Lufft hardware, this will >>> save you a lot of time: >>> https://github.com/Tasm-Devil/lufft-python >>> >>> On Wednesday, May 8, 2019 at 12:31:13 PM UTC-5, Stefan Schnidrig wrote: >>>> >>>> Hi Guys. >>>> Can someone tell me whether the weewx system also supports the weather >>>> stations of the company LUFFT (www.lufft.com)? These are supplied with a >>>> Modbus and RS485 readout. I prefer the RS485, as it is easier. If this >>>> works, what do you need to set in weewx to be able to read the data? The >>>> picture of the sensor you see above in my post. >>>> >>>> Many Thanks >>>> Stefan >>>> >>>> >>>> Am Donnerstag, 25. April 2019 13:35:00 UTC+2 schrieb Stefan Schnidrig: >>>>> >>>>> Hallo zusammen. >>>>> >>>>> Kann mir jemand sagen, ob die Wetterstation der Firma LUFFT mit der >>>>> RS485 Schnittstelle funktioniert mit Weewx? >>>>> >>>>> Vielen Dank >>>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/f15e1d23-a637-4735-8806-cd44bb68cf8c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
