Thanks Pat for the clarity. I will look at the wiki again and have a further play... Apologies for all the questions...
On Friday, June 7, 2019 at 6:13:09 AM UTC+10, Pat wrote: > > I see. So if we break it down to keep it simple, go back to the > graphs.conf.example file that comes with the skin. Then under the > [homepage] group, add in the wind rose example code > <https://github.com/poblabs/weewx-belchertown/wiki/Belchertown-Charts-Documentation#wind-rose> > > from the wiki. The code is this simple: > > [[roseplt]] > title = Wind Rose > [[[windRose]]] > > > > > The number of brackets is important. This defines the nesting of the > configuration. The single brackets are the top layer, then the doulbe > brakets are the chart definition, and the triple brackets are the > observations. You also cannot have duplicate names within the brackets. > > So to add a the windrose chart, we give it a name of roseplt, this is > because it is in the double brackets. > > Then beneath that is the triple bracket of windRose which is the > observation to chart. > > The full config for [homepage] from the example conf with the added > windrose will look like this. > > Note that the wind rose is at the end. If you want to move it, you can - > just make sure you do not put a double bracket under a triple bracket. > > Also, the double brackets must have a triple bracket beneath it - > otherwise you'll have an empty chart (like you saw last night). > > Any settings beneath a triple bracket are settings that apply to the > observation only (the triple bracket observation) > > I hope this helps. The Belchertown Charts Wiki > <https://github.com/poblabs/weewx-belchertown/wiki/Belchertown-Charts-Documentation> > > has a lot of great information and I think it's worth some time to check > out the examples within! > > > > [homepage] > # Chart Timespan Defaults > title = "Homepage" > show_button = true > button_text = "Homepage" > time_length = today > tooltip_date_format = "LLL" > gapsize = 300000 # This should be your archive_interval from weewx.conf > multiplied by 1000 to get milliseconds. Standard is 5 minutes > > [[chart1]] > title = Temperature > [[[outTemp]]] > zIndex = 1 > name = Temperature > [[[windchill]]] > [[[heatindex]]] > color = "#f7a35c" > [[[dewpoint]]] > color = purple > > [[chart2]] > # The combined Wind Chart works best in this configuration > title = Wind Speed and Direction > yaxis_min = 0 > [[[windDir]]] > zIndex = 1 > yAxis = 1 > yaxis_max = 360 > lineWidth = 0 > [[[[marker]]]] > enabled = true > [[[[states]]]] > [[[[[hover]]]]] > lineWidthPlus = 0 > [[[windGust]]] > [[[windSpeed]]] > zIndex = 2 > > [[chart3]] > title = Rain > [[[rainRate]]] > yAxis = 1 > [[[rainTotal]]] > name = Rain Total > > [[chart4]] > title = Barometer > type = spline > [[[barometer]]] > color = "#BECC00" > yAxis_tickInterval = 0.01 > > [[roseplt]] > title = Wind Rose > [[[windRose]]] > > > > > > > > > On Thursday, June 6, 2019 at 3:44:50 PM UTC-4, Joe Santas wrote: >> >> Looks like it only happens when i add the rose on the today (day) >> section. Tried different ways and it keeps popping up. I have it removed >> for the moment. >> >> On Friday, June 7, 2019 at 5:08:31 AM UTC+10, Pat wrote: >>> >>> I'm lost. I don't see a blank graph. You didn't specify which graph >>> section was giving you a problem. I just don't have the details to help >>> further right now. I saw earlier you were running Seasons, now you're back >>> on Belchertown - so I assume you may have fixed what was wrong. >>> >>> On Thursday, June 6, 2019 at 8:30:01 AM UTC-4, Joe Santas wrote: >>>> >>>> Apologies Pat was at work when i was trying to fix this via my remote >>>> viewer. >>>> Can you take a look at the following http://jsantas.com/graphs/ One >>>> chart is empty everything else is in order as far as i can see. >>>> I used your config file earlier in the day and it straightened things >>>> out apart from this one chart. >>>> If you need anything further let me know. >>>> >>>> Regards >>>> >>>> On Thursday, June 6, 2019 at 12:47:08 PM UTC+10, Pat wrote: >>>>> >>>>> Please verify you used my changes. I can see you still have the same >>>>> blank charts - especially the chart3 I mentioned before. >>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/267eb27c-4e6e-4568-a544-b40f32b82b38%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
