Maarten I think you may be able to add your extraTemp1 into this section below in skin.conf/weewx.conf (depending on where you have the [Extras] stanza). Give it a try, I'm sure Pat will jump in and correct me if I'm wrong. Otherwise you may need to use one of the custom content areas as described in the Wiki. Let us know how you get on :)
# Station Observations. Special observation rainWithRainRate combines Daily Rain with Rain Rate in 1 line station_observations = "barometer", "dewpoint", "outHumidity", "rainWithRainRate On Fri, Jun 14, 2019 at 6:46 PM Maarten van der Hoeven <[email protected]> wrote: > Hi, > > Thanks for the skin 1.0. Running without a flaw, and looking nice :) > > One question... I am using a second temperature sensor (temperature on the > grass, 10cm above the surface), data is stored in the database as > extraTemp1. What I understood from the wiki-chart, it should not be a > problem to plot this value (simply mention the database-field to plot). > However, I also want to show he value of this field on the webpage. > > What would be the correct and logical way to get this done? Although I can > hack around a bit and get it done, I am wondering if there is a more > sophisticated approach to hook up this sensor-data in the data-stream and > to show it on the webpage. Or is all data already available in the > data-stream (MQTT), and is the question only how to show this value at the > website... > > Thanks. > > Op zaterdag 1 juni 2019 18:57:56 UTC+2 schreef Pat: >> >> Belchertown skin 1.0 is released! >> >> This update contains a lot of updates and changes including *an entire >> rewrite of the Highcharts system* which allows you to make almost any >> graph you want for almost any time span you want. You can see some examples >> of the charts you can make on the BelchertownWeather.com website graphs >> page <https://belchertownweather.com/graphs/?graph=all>. >> >> You can add/remove/change/reorder any chart, change colors, add >> observation plots, categorize for all time. Almost anything you want to do >> is available! The skin comes with the standard 4 charts ready to go, but >> there's extensive Belchertown Charts Documentation >> <https://github.com/poblabs/weewx-belchertown/wiki/Belchertown-Charts-Documentation> >> which can help you get started. >> >> In addition to the Charts there's now a dark mode (which has an >> auto-switching mode based on sunset/sunrise), more flexibility for >> translations, user customized station observation table which is updated in >> real time if the MQTT Websockets are enabled, and a lot more. Check the >> release notes for all the details! >> >> You can download the latest release here >> <https://github.com/poblabs/weewx-belchertown/releases/download/weewx-belchertown-1.0/weewx-belchertown-release-1.0.tar.gz>, >> and read all of the details on the changes here: >> https://github.com/poblabs/weewx-belchertown/releases >> >> *Note: You cannot upgrade from Belchertown 0.9 and older*. You must >> uninstall everything and reinstall new. This is due to the Chart system >> being fully rewritten and the potential for conflicts. Please read this >> upgrade guide if you are upgrading from an older version of Belchertown skin >> <https://github.com/poblabs/weewx-belchertown/wiki/Upgrading-to-Belchertown-skin-1.0> >> . >> >> Thanks to all the beta testers and translators over the last couple of >> months help me iron out all the kinks and shape the skin in a way that can >> be translated a little easier! >> >> Attached are some examples of the charts that can be made. If you find >> any issues, you can reply here or open an issue on the Belchertown skin >> GitHub page <https://github.com/poblabs/weewx-belchertown>. >> > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/e84dcbf2-2174-4032-83a7-93c738e6c4ec%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/e84dcbf2-2174-4032-83a7-93c738e6c4ec%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CACjxfUuBvDKYurEftDCtcbfvXgNviQKC_TbSac7xLpWrJ%2B9j_Q%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
