This seems relevant to me, as I'm also trying to use RTL_433
On Monday, 11 February 2019 15:09:04 UTC+11, N0ZO wrote:
>
> So I've wanted to use SDR to capture the data of the ObserverIP that I
> have. I have the WS-1400-IP which is a rebranded HP-1000 by Fine Offset.
> It took me forever to actually get where my Pi3B could read the data from
> the SDR. But now I finally got that working when I setup weewx by the
> setup.py method.
>
> Now I have hit a block that I'm not sure I can figure out, especially
> since I'm not finding anything of a fix on the internet.
>
> Running sudo PYTHONPATH=bin python bin/user/sdr.py --cmd="rtl_433 -M utc
>> -F json -G -p 66 -f 915000000"
>
>
> gives me this:
>
> out: ['{"time" : "2019-02-11 03:44:32", "model" : "Fine Offset WH24",
>> "id" : 140, "temperature_C" : 12.600, "humidity" : 80, "wind_dir_deg" :
>> 111, "wind_speed_ms" : 0.280, "gust_speed_ms" : 1.120, "rainfall_mm" :
>> 1150.800, "uv" : 1, "uvi" : 0, "light_lux" : 0.000, "battery" : "OK", "mic"
>> : "CRC"}\n', '{"time" : "2019-02-11 03:44:33", "model" : "Fine Offset
>> Electronics, WH25", "id" : 104, "temperature_C" : 20.000, "humidity" : 57,
>> "pressure_hPa" : 1004.100, "battery" : "OK", "mic" : "CHECKSUM"}\n']
>> parsed: {'temperature.104.FOWH25Packet': 20.0,
>> 'battery.104.FOWH25Packet': 0, 'dateTime': 1549856673,
>> 'humidity.104.FOWH25Packet': 57.0, 'pressure.104.FOWH25Packet': 1004.1,
>> 'usUnits': 16}
>> out: ['{"time" : "2019-02-11 03:44:48", "model" : "Fine Offset WH24",
>> "id" : 140, "temperature_C" : 12.600, "humidity" : 80, "wind_dir_deg" :
>> 109, "wind_speed_ms" : 0.980, "gust_speed_ms" : 1.120, "rainfall_mm" :
>> 1150.800, "uv" : 1, "uvi" : 0, "light_lux" : 0.000, "battery" : "OK", "mic"
>> : "CRC"}\n']
>
>
> Under parsed I get that I can now enter the temperature.104.FOWH25Packet
> under the [[Sensor_map]] under SDR. I also understand that my indoor
> device is the Fine Offset WH25, and the outdoor is the Fine Offset WH24.
> But part of what I can't figure out is this:
> It gave me the detail I needed for the Sensor_Map when it parsed the WH25,
> but it didn't do that for WH24. I think my questions may be linked in a way
> since it didn't parse that out.
>
> Now, when I run weewx instead of the sdr.py, I get this:
>
> Feb 10 21:50:27 raspberrypi weewx[2692]: sdr: MainThread: parse_json:
>>> unknown model Fine Offset WH24
>>
>> Feb 10 21:50:27 raspberrypi weewx[2692]: sdr: MainThread: punt
>>> unrecognized line '{"time" : "2019-02-11 03:50:24", "model" : "Fine Offset
>>> WH24", "id" : 140, "temperature_C" : 12.600, "humidity" : 81,
>>> "wind_dir_deg" : 152, "wind_speed_ms" : 0.840, "gust_speed_ms" : 1.120,
>>> "rainfall_mm" : 1150.800, "uv" : 1, "uvi" : 0, "light_lux" : 0.000,
>>> "battery" : "OK", "mic" : "CRC"}#012'
>>
>> Weewx is generating without error, and even has the inside temperature on
> the page it generated in public_html
>
> I can provide actual logs if needed, but I'm thinking it's some issue that
> I'm not seeing either with rtl_433 or something I missed in a setting with
> weewx.
>
> Also, I'm not sure if it matters or not, but I ran this line under SDR so
> that it captured data:
>
> cmd= rtl_433 -M utc -F json -G -p 66 -f 915000000
>
>
>
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/aba9cd8a-ce59-48b0-83f1-e2239ae40ecc%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
