Hi Sean,
Does the following directory exists
template = result.csv.tmpl
HTML_ROOT =* /var/www/html/mbcharts*
The charts are not working because the report generator cannot find the
result.csv file.
Usually the paths look like this
[[[DAILYCHARTS]]]
encoding = strict_ascii
template = result.csv.tmpl
HTML_ROOT = /var/www/html/pws/mbcharts
# Charts that plot "by month"
[[[MONTHLYCHARTS]]]
encoding = strict_ascii
template = MMYYYY.csv.tmpl
HTML_ROOT = /var/www/html/pws/mbcharts/chartdata
# Charts that plot "by year"
[[[YEARLYCHARTS]]]
encoding = strict_ascii
template = YYYY.csv.tmpl
HTML_ROOT = /var/www/html/pws/mbcharts/chartdata
Thanks Jerry
7, Sean Lane wrote:
>
> please see below :
>
>
> ###############################################################################
> # W34SKIN SKIN CONFIGURATION FILE
> #
> # Copyright (c) 2018 Tom Keffer <[email protected] <javascript:>> and
> Matthew Wall #
> # See the file LICENSE.txt for your rights.
> #
>
> ###############################################################################
>
> skin_semantics = 2
>
>
> ###############################################################################
>
> [Defaults]
>
> [[Units]]
>
> # The following section sets what unit to use for each unit
> group.
> # NB: The unit is always in the singular. I.e.,
> 'mile_per_hour',
> # NOT 'miles_per_hour'
> [[[Groups]]]
>
> group_altitude = meter # Options are 'foot' or 'meter'
> group_degree_day = degree_C_day # Options are
> 'degree_F_day' or 'degree_C_day'
> group_pressure = hPa # Options are 'inHg', 'mmHg',
> 'mbar', or 'hPa'
> group_rain = mm # Options are 'inch', 'cm', or 'mm'
> group_rainrate = mm_per_hour # Options are
> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
> group_speed = km_per_hour # Options are
> 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
> group_speed2 = km_per_hour2 # Options are
> 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
> group_temperature = degree_C # Options are 'degree_F'
> or 'degree_C'
> mbar = "mb"
> hPa = "hPa"
> inHg = "in"
> mm_per_hour = "mm"
> cm_per_hour = "cm"
> inch_per_hour = "in"
> km_per_hour = "km/h"
> knot = "kts"
> meter_per_second ="m/s"
> mile_per_hour ="mph"
>
>
>
> [[Labels]]
>
> day = " day", " days"
> hour = " hour", " hours"
> minute = " minute", " minutes"
> second = " second", " seconds"
> NONE = ""
>
> # Override some labels. No need to identify these as a "Battery"
> # or "Voltage", because that is included in the template.
> [[Generic]]
> txBatteryStatus = Transmitter
> windBatteryStatus = Wind
> rainBatteryStatus = Rain
> outTempBatteryStatus = Outside Temperature
> inTempBatteryStatus = Inside Temperature
> consBatteryVoltage = Console
> heatingVoltage = Heating
> supplyVoltage = Supply
> referenceVoltage = Reference
>
> # Some specialized labels
> rain_today = Rain Today
> wind = Wind
>
>
>
> ###############################################################################
>
> # The CheetahGenerator creates files from templates. This section
> # specifies which files will be generated from which template.
>
> [CheetahGenerator]
>
> # Possible encodings are 'html_entities', 'utf8', or 'strict_ascii'
> encoding = html_entities
> search_list_extensions = user.stats.MyStats, user.lastrain.lastRainTags
>
>
> [[WXCHARTDATA]]
>
>
> # Charts that plot "by day"
> [[[DAILYCHARTS]]]
> encoding = strict_ascii
> template = result.csv.tmpl
> HTML_ROOT = /var/www/html/mbcharts
>
> # Charts that plot "by month"
> [[[MONTHLYCHARTS]]]
> encoding = strict_ascii
> template = MMYYYY.csv.tmpl
> HTML_ROOT = /var/www/html/mbcharts/chartdata
>
>
>
> # Charts that plot "by year"
> [[[YEARLYCHARTS]]]
> encoding = strict_ascii
> template = YYYY.csv.tmpl
> HTML_ROOT = /var/www/html/mbcharts/chartdata
>
>
> [[WXSTATS]]
>
> # Generates data for various W34 Statistics
> [[[W34STATS]]]
> encoding = strict_ascii
> template = w34stats.php.tmpl
> HTML_ROOT = /var/www/html
>
>
>
> ###############################################################################
>
> # The CopyGenerator copies files from one location to another.
>
> [CopyGenerator]
>
> # List of files to be copied only the first time the generator runs
> copy_once = seasons.css, seasons.js, favicon.ico, font/*.woff,
> font/*.woff2
>
> # List of files to be copied each time the generator runs
> # copy_always =
>
>
>
> ###############################################################################
>
> [Generators]
> # The list of generators that are to be run:
> generator_list = weewx.cheetahgenerator.CheetahGenerator,
> weewx.reportengine.CopyGenerator
>
>
> On Tue, Jun 25, 2019 at 7:26 PM steeple ian <[email protected]
> <javascript:>> wrote:
>
>> Can I see your w34skin skin.conf file please?
>>
>> On 25 Jun 2019, at 23:14, Sean Lane <[email protected] <javascript:>>
>> wrote:
>>
>> i have a adjusted and no change..
>>
>>
>> On Mon, Jun 24, 2019 at 6:56 PM steeple ian <[email protected]
>> <javascript:>> wrote:
>>
>>> Sean,
>>>
>>> Make sure you have your paths set correctly in your w34skin skin.conf
>>> file.
>>>
>>> Looking at your weewx.conf file it appears you have missed this section
>>> in the installation guide: -
>>>
>>> To enable WeeWX to communicate with the weather34 dashboard template,
>>> you must install the CRT plugin, (stands for Cumulus Real Time). Please
>>> follow the detailed instructions at
>>> https://github.com/weewx/weewx/wiki/crt. After installation edit the
>>> weewx-conf file. Go to the [CumulusRealTime] which will likely be near the
>>> end of the script. Change this section to reflect the following: -
>>>
>>> [CumulusRealTime]
>>> filename = /var/www/html/weewx/realtime.txt
>>> unit_system = METRIC
>>>
>>> If your path to your web root is different, please amend the path in
>>> front of 'weewx/realtime.txt' accordingly.
>>>
>>> VERY IMPORTANT. It is crucial that the '[CumulusRealTime]' unit_system
>>> is set to METRIC as in the snippet above. If US or METRICWX setting is
>>> used, the resulting display will be un-predictable and even nonsensical!
>>>
>>> Finally go to the '[StdReport]' section and add this: -
>>>
>>> [[w34skinReport]]
>>> # The w34skinReport uses the 'w34skin' skin, which contains the
>>> # templates for the WX-HWS charts.
>>> skin = w34skin
>>> enable = true
>>>
>>> [[[Units]]]
>>> # The following section sets the units for
>>> w34skin.
>>> # IMPORTANT do not change in any circumstance.
>>>
>>> [[[[Groups]]]]
>>> group_altitude = meter
>>> group_degree_day = degree_C_day
>>> group_pressure = hPa
>>> group_rain = mm
>>> group_rainrate = mm_per_hour
>>> group_speed = km_per_hour
>>> group_speed2 = km_per_hour2
>>> group_temperature = degree_C
>>> mbar = "mb"
>>> hPa = "hPa"
>>> inHg = "in"
>>> mm_per_hour = "mm"
>>> cm_per_hour = "cm"
>>> inch_per_hour = "in"
>>> km_per_hour = "km/h"
>>> knot = "kts"
>>> meter_per_second ="m/s"
>>> mile_per_hour ="mph"
>>>
>>> Once completed, make sure you save weewx.conf
>>>
>>>
>>>
>>> On 24 Jun 2019, at 22:40, Sean Lane <[email protected] <javascript:>>
>>> wrote:
>>>
>>> Please see attached
>>>
>>> On Mon, Jun 24, 2019 at 6:14 PM steeple ian <[email protected]
>>> <javascript:>> wrote:
>>>
>>>> Ok I see you have installed the latest version. You are still not
>>>> generating the .csv files for the charts or the w34stats.php for the live
>>>> data variables. Can you post the contents of your weewx.conf file please
>>>> (make sure that you remove any passwords or sensitive information first).
>>>>
>>>>
>>>> On 24 Jun 2019, at 20:10, steeple ian <[email protected] <javascript:>>
>>>> wrote:
>>>>
>>>> quickest way is to rename you existing folder. Do a full install (note
>>>> new expanded instructions) then copy across any settings or archive data
>>>> that you wish to keep. Remember it is important to set your permissions as
>>>> per the install instructions.
>>>>
>>>> On Mon, Jun 24, 2019 at 8:07 PM Sean Lane <[email protected]
>>>> <javascript:>> wrote:
>>>>
>>>>> is there a quick update method or flatten the folder and files ?
>>>>>
>>>>> On Mon, Jun 24, 2019 at 4:06 PM steeple ian <[email protected]
>>>>> <javascript:>> wrote:
>>>>>
>>>>>> Sean,
>>>>>>
>>>>>> You are using an older version of the template. If possible, I
>>>>>> suggest that you update from the GitHub. There are several enhancements
>>>>>> which will help you.
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Mon, Jun 24, 2019 at 7:15 PM Sean Lane <[email protected]
>>>>>> <javascript:>> wrote:
>>>>>>
>>>>>>> I have having issues with the stats / archive of data. As you can
>>>>>>> see by my page https://weather.thelanes.ca/ there is data missing.
>>>>>>>
>>>>>>> Anyone?
>>>>>>>
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "weewx-user" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send an email to [email protected] <javascript:>.
>>>>>>> To view this discussion on the web visit
>>>>>>> https://groups.google.com/d/msgid/weewx-user/7162616d-5b57-4e06-8f43-a74c174ac4e8%40googlegroups.com
>>>>>>>
>>>>>>> <https://groups.google.com/d/msgid/weewx-user/7162616d-5b57-4e06-8f43-a74c174ac4e8%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>> .
>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "weewx-user" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to [email protected] <javascript:>.
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/weewx-user/CADASSaR3SbQOKurkHzNsYPQ-4FPe75RtcqyQ%2BAWL%2Bp63VOEjDg%40mail.gmail.com
>>>>>>
>>>>>> <https://groups.google.com/d/msgid/weewx-user/CADASSaR3SbQOKurkHzNsYPQ-4FPe75RtcqyQ%2BAWL%2Bp63VOEjDg%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>>> .
>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to [email protected] <javascript:>.
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/weewx-user/CAGP%2B8WMgS_RgJMDPNEMjXKnCbCwCJD%2BNBDu2dw3qgxgAFaoMSA%40mail.gmail.com
>>>>>
>>>>> <https://groups.google.com/d/msgid/weewx-user/CAGP%2B8WMgS_RgJMDPNEMjXKnCbCwCJD%2BNBDu2dw3qgxgAFaoMSA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>
>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected] <javascript:>.
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/weewx-user/A7CB1776-7B97-4B27-B2C1-0213B564CBE9%40gmail.com
>>>>
>>>> <https://groups.google.com/d/msgid/weewx-user/A7CB1776-7B97-4B27-B2C1-0213B564CBE9%40gmail.com?utm_medium=email&utm_source=footer>
>>>> .
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected] <javascript:>.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/CAGP%2B8WPU6zhVDVP_1A4nxW51zrJY79Ofkr6B5e7PTkamu3UJkg%40mail.gmail.com
>>>
>>> <https://groups.google.com/d/msgid/weewx-user/CAGP%2B8WPU6zhVDVP_1A4nxW51zrJY79Ofkr6B5e7PTkamu3UJkg%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>> .
>>> For more options, visit https://groups.google.com/d/optout.
>>> <weewx.conf>
>>>
>>>
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected] <javascript:>.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/D67BC0DD-187E-4A5A-B932-57D2BF3322BD%40gmail.com
>>>
>>> <https://groups.google.com/d/msgid/weewx-user/D67BC0DD-187E-4A5A-B932-57D2BF3322BD%40gmail.com?utm_medium=email&utm_source=footer>
>>> .
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected] <javascript:>.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/CAGP%2B8WNw%2BDwS4LsmzHzm0zPf7yXQFbZaWNCr5P1%2BdwzgG9vX3Q%40mail.gmail.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/CAGP%2B8WNw%2BDwS4LsmzHzm0zPf7yXQFbZaWNCr5P1%2BdwzgG9vX3Q%40mail.gmail.com?utm_medium=email&utm_source=footer>
>> .
>> For more options, visit https://groups.google.com/d/optout.
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected] <javascript:>.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/7A5CB3C1-7AF5-4BF4-ABAD-C7558380ABC0%40gmail.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/7A5CB3C1-7AF5-4BF4-ABAD-C7558380ABC0%40gmail.com?utm_medium=email&utm_source=footer>
>> .
>> For more options, visit https://groups.google.com/d/optout.
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/2f831b1b-e220-4d73-883d-f90aa9330cca%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
