[image: skinfolder.png] IS this the right layout for the config
On Mon, Jul 1, 2019 at 11:58 AM Sean Lane <[email protected]> wrote: > Hey Thanks for the response.. The folder structure exists however i dont > see the result.csv.. i am tinkering at it today so i hope to resolve it. > > On Mon, Jul 1, 2019 at 1:04 AM J D <[email protected]> wrote: > >> Hi Sean, >> >> Does the following directory exists >> template = result.csv.tmpl >> HTML_ROOT =* /var/www/html/mbcharts* >> >> The charts are not working because the report generator cannot find the >> result.csv file. >> Usually the paths look like this >> >> [[[DAILYCHARTS]]] >> encoding = strict_ascii >> template = result.csv.tmpl >> HTML_ROOT = /var/www/html/pws/mbcharts >> >> # Charts that plot "by month" >> [[[MONTHLYCHARTS]]] >> encoding = strict_ascii >> template = MMYYYY.csv.tmpl >> HTML_ROOT = /var/www/html/pws/mbcharts/chartdata >> >> # Charts that plot "by year" >> [[[YEARLYCHARTS]]] >> encoding = strict_ascii >> template = YYYY.csv.tmpl >> HTML_ROOT = /var/www/html/pws/mbcharts/chartdata >> >> Thanks Jerry >> >> 7, Sean Lane wrote: >>> >>> please see below : >>> >>> >>> ############################################################################### >>> # W34SKIN SKIN CONFIGURATION FILE >>> # >>> # Copyright (c) 2018 Tom Keffer <[email protected]> and Matthew Wall >>> # >>> # See the file LICENSE.txt for your rights. >>> # >>> >>> ############################################################################### >>> >>> skin_semantics = 2 >>> >>> >>> ############################################################################### >>> >>> [Defaults] >>> >>> [[Units]] >>> >>> # The following section sets what unit to use for each unit >>> group. >>> # NB: The unit is always in the singular. I.e., >>> 'mile_per_hour', >>> # NOT 'miles_per_hour' >>> [[[Groups]]] >>> >>> group_altitude = meter # Options are 'foot' or 'meter' >>> group_degree_day = degree_C_day # Options are >>> 'degree_F_day' or 'degree_C_day' >>> group_pressure = hPa # Options are 'inHg', 'mmHg', >>> 'mbar', or 'hPa' >>> group_rain = mm # Options are 'inch', 'cm', or 'mm' >>> group_rainrate = mm_per_hour # Options are >>> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' >>> group_speed = km_per_hour # Options are >>> 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' >>> group_speed2 = km_per_hour2 # Options are >>> 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' >>> group_temperature = degree_C # Options are 'degree_F' >>> or 'degree_C' >>> mbar = "mb" >>> hPa = "hPa" >>> inHg = "in" >>> mm_per_hour = "mm" >>> cm_per_hour = "cm" >>> inch_per_hour = "in" >>> km_per_hour = "km/h" >>> knot = "kts" >>> meter_per_second ="m/s" >>> mile_per_hour ="mph" >>> >>> >>> >>> [[Labels]] >>> >>> day = " day", " days" >>> hour = " hour", " hours" >>> minute = " minute", " minutes" >>> second = " second", " seconds" >>> NONE = "" >>> >>> # Override some labels. No need to identify these as a "Battery" >>> # or "Voltage", because that is included in the template. >>> [[Generic]] >>> txBatteryStatus = Transmitter >>> windBatteryStatus = Wind >>> rainBatteryStatus = Rain >>> outTempBatteryStatus = Outside Temperature >>> inTempBatteryStatus = Inside Temperature >>> consBatteryVoltage = Console >>> heatingVoltage = Heating >>> supplyVoltage = Supply >>> referenceVoltage = Reference >>> >>> # Some specialized labels >>> rain_today = Rain Today >>> wind = Wind >>> >>> >>> >>> ############################################################################### >>> >>> # The CheetahGenerator creates files from templates. This section >>> # specifies which files will be generated from which template. >>> >>> [CheetahGenerator] >>> >>> # Possible encodings are 'html_entities', 'utf8', or 'strict_ascii' >>> encoding = html_entities >>> search_list_extensions = user.stats.MyStats, >>> user.lastrain.lastRainTags >>> >>> >>> [[WXCHARTDATA]] >>> >>> >>> # Charts that plot "by day" >>> [[[DAILYCHARTS]]] >>> encoding = strict_ascii >>> template = result.csv.tmpl >>> HTML_ROOT = /var/www/html/mbcharts >>> >>> # Charts that plot "by month" >>> [[[MONTHLYCHARTS]]] >>> encoding = strict_ascii >>> template = MMYYYY.csv.tmpl >>> HTML_ROOT = /var/www/html/mbcharts/chartdata >>> >>> >>> >>> # Charts that plot "by year" >>> [[[YEARLYCHARTS]]] >>> encoding = strict_ascii >>> template = YYYY.csv.tmpl >>> HTML_ROOT = /var/www/html/mbcharts/chartdata >>> >>> >>> [[WXSTATS]] >>> >>> # Generates data for various W34 Statistics >>> [[[W34STATS]]] >>> encoding = strict_ascii >>> template = w34stats.php.tmpl >>> HTML_ROOT = /var/www/html >>> >>> >>> >>> ############################################################################### >>> >>> # The CopyGenerator copies files from one location to another. >>> >>> [CopyGenerator] >>> >>> # List of files to be copied only the first time the generator runs >>> copy_once = seasons.css, seasons.js, favicon.ico, font/*.woff, >>> font/*.woff2 >>> >>> # List of files to be copied each time the generator runs >>> # copy_always = >>> >>> >>> >>> ############################################################################### >>> >>> [Generators] >>> # The list of generators that are to be run: >>> generator_list = weewx.cheetahgenerator.CheetahGenerator, >>> weewx.reportengine.CopyGenerator >>> >>> >>> On Tue, Jun 25, 2019 at 7:26 PM steeple ian <[email protected]> wrote: >>> >>>> Can I see your w34skin skin.conf file please? >>>> >>>> On 25 Jun 2019, at 23:14, Sean Lane <[email protected]> wrote: >>>> >>>> i have a adjusted and no change.. >>>> >>>> >>>> On Mon, Jun 24, 2019 at 6:56 PM steeple ian <[email protected]> wrote: >>>> >>>>> Sean, >>>>> >>>>> Make sure you have your paths set correctly in your w34skin skin.conf >>>>> file. >>>>> >>>>> Looking at your weewx.conf file it appears you have missed this >>>>> section in the installation guide: - >>>>> >>>>> To enable WeeWX to communicate with the weather34 dashboard template, >>>>> you must install the CRT plugin, (stands for Cumulus Real Time). Please >>>>> follow the detailed instructions at >>>>> https://github.com/weewx/weewx/wiki/crt. After installation edit the >>>>> weewx-conf file. Go to the [CumulusRealTime] which will likely be near the >>>>> end of the script. Change this section to reflect the following: - >>>>> >>>>> [CumulusRealTime] >>>>> filename = /var/www/html/weewx/realtime.txt >>>>> unit_system = METRIC >>>>> >>>>> If your path to your web root is different, please amend the path in >>>>> front of 'weewx/realtime.txt' accordingly. >>>>> >>>>> VERY IMPORTANT. It is crucial that the '[CumulusRealTime]' unit_system >>>>> is set to METRIC as in the snippet above. If US or METRICWX setting is >>>>> used, the resulting display will be un-predictable and even nonsensical! >>>>> >>>>> Finally go to the '[StdReport]' section and add this: - >>>>> >>>>> [[w34skinReport]] >>>>> # The w34skinReport uses the 'w34skin' skin, which >>>>> contains the >>>>> # templates for the WX-HWS charts. >>>>> skin = w34skin >>>>> enable = true >>>>> >>>>> [[[Units]]] >>>>> # The following section sets the units for >>>>> w34skin. >>>>> # IMPORTANT do not change in any circumstance. >>>>> >>>>> [[[[Groups]]]] >>>>> group_altitude = meter >>>>> group_degree_day = degree_C_day >>>>> group_pressure = hPa >>>>> group_rain = mm >>>>> group_rainrate = mm_per_hour >>>>> group_speed = km_per_hour >>>>> group_speed2 = km_per_hour2 >>>>> group_temperature = degree_C >>>>> mbar = "mb" >>>>> hPa = "hPa" >>>>> inHg = "in" >>>>> mm_per_hour = "mm" >>>>> cm_per_hour = "cm" >>>>> inch_per_hour = "in" >>>>> km_per_hour = "km/h" >>>>> knot = "kts" >>>>> meter_per_second ="m/s" >>>>> mile_per_hour ="mph" >>>>> >>>>> Once completed, make sure you save weewx.conf >>>>> >>>>> >>>>> >>>>> On 24 Jun 2019, at 22:40, Sean Lane <[email protected]> wrote: >>>>> >>>>> Please see attached >>>>> >>>>> On Mon, Jun 24, 2019 at 6:14 PM steeple ian <[email protected]> >>>>> wrote: >>>>> >>>>>> Ok I see you have installed the latest version. You are still not >>>>>> generating the .csv files for the charts or the w34stats.php for the live >>>>>> data variables. Can you post the contents of your weewx.conf file please >>>>>> (make sure that you remove any passwords or sensitive information first). >>>>>> >>>>>> >>>>>> On 24 Jun 2019, at 20:10, steeple ian <[email protected]> wrote: >>>>>> >>>>>> quickest way is to rename you existing folder. Do a full install >>>>>> (note new expanded instructions) then copy across any settings or archive >>>>>> data that you wish to keep. Remember it is important to set your >>>>>> permissions as per the install instructions. >>>>>> >>>>>> On Mon, Jun 24, 2019 at 8:07 PM Sean Lane <[email protected]> wrote: >>>>>> >>>>>>> is there a quick update method or flatten the folder and files ? >>>>>>> >>>>>>> On Mon, Jun 24, 2019 at 4:06 PM steeple ian <[email protected]> >>>>>>> wrote: >>>>>>> >>>>>>>> Sean, >>>>>>>> >>>>>>>> You are using an older version of the template. If possible, I >>>>>>>> suggest that you update from the GitHub. There are several enhancements >>>>>>>> which will help you. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Mon, Jun 24, 2019 at 7:15 PM Sean Lane <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> I have having issues with the stats / archive of data. As you can >>>>>>>>> see by my page https://weather.thelanes.ca/ there is data missing. >>>>>>>>> >>>>>>>>> Anyone? >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/7162616d-5b57-4e06-8f43-a74c174ac4e8%40googlegroups.com >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/7162616d-5b57-4e06-8f43-a74c174ac4e8%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/CADASSaR3SbQOKurkHzNsYPQ-4FPe75RtcqyQ%2BAWL%2Bp63VOEjDg%40mail.gmail.com >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/CADASSaR3SbQOKurkHzNsYPQ-4FPe75RtcqyQ%2BAWL%2Bp63VOEjDg%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>> >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/CAGP%2B8WMgS_RgJMDPNEMjXKnCbCwCJD%2BNBDu2dw3qgxgAFaoMSA%40mail.gmail.com >>>>>>> <https://groups.google.com/d/msgid/weewx-user/CAGP%2B8WMgS_RgJMDPNEMjXKnCbCwCJD%2BNBDu2dw3qgxgAFaoMSA%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/A7CB1776-7B97-4B27-B2C1-0213B564CBE9%40gmail.com >>>>>> <https://groups.google.com/d/msgid/weewx-user/A7CB1776-7B97-4B27-B2C1-0213B564CBE9%40gmail.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/CAGP%2B8WPU6zhVDVP_1A4nxW51zrJY79Ofkr6B5e7PTkamu3UJkg%40mail.gmail.com >>>>> <https://groups.google.com/d/msgid/weewx-user/CAGP%2B8WPU6zhVDVP_1A4nxW51zrJY79Ofkr6B5e7PTkamu3UJkg%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> <weewx.conf> >>>>> >>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/D67BC0DD-187E-4A5A-B932-57D2BF3322BD%40gmail.com >>>>> <https://groups.google.com/d/msgid/weewx-user/D67BC0DD-187E-4A5A-B932-57D2BF3322BD%40gmail.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/CAGP%2B8WNw%2BDwS4LsmzHzm0zPf7yXQFbZaWNCr5P1%2BdwzgG9vX3Q%40mail.gmail.com >>>> <https://groups.google.com/d/msgid/weewx-user/CAGP%2B8WNw%2BDwS4LsmzHzm0zPf7yXQFbZaWNCr5P1%2BdwzgG9vX3Q%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>> . >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/7A5CB3C1-7AF5-4BF4-ABAD-C7558380ABC0%40gmail.com >>>> <https://groups.google.com/d/msgid/weewx-user/7A5CB3C1-7AF5-4BF4-ABAD-C7558380ABC0%40gmail.com?utm_medium=email&utm_source=footer> >>>> . >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/2f831b1b-e220-4d73-883d-f90aa9330cca%40googlegroups.com >> <https://groups.google.com/d/msgid/weewx-user/2f831b1b-e220-4d73-883d-f90aa9330cca%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> For more options, visit https://groups.google.com/d/optout. >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAGP%2B8WMZ_cRWPiT1nr%2Bsv8WLHPr-kYdn_5k_EDVL9MR3u_wPRg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
