I tried that. I get an unrecognized hardware error and it doesn’t complete. Same if I try the wee_device —info Does the Vantage driver not support the Weather Envoy ?.
> On Jul 25, 2019, at 4:20 AM, Thomas Keffer <[email protected]> wrote: > > Use wee_device with the --clear-memory option. Be sure to stop weewx first. > > -tk > >> On Thu, Jul 25, 2019 at 2:48 AM Allan Tyson <[email protected]> wrote: >> I have a Davis USB Westher Envoy connected to an RPi running weewx. It was >> running fine but I stopped weewx on the RPi and disconnected the Weather >> Envoy USB cable from the RPi to connect it to another RPi I was using to >> install Raspbian Buster with weewx on a smaller micro SD card so I could >> save it’s image to a smaller backup image file having originally installed >> it on an internal 120GB SSD drive. >> The new installation worked just great but when I reconnected the Weather >> Envoy to the original RPi I discovered that the USB loggers’s memory was >> somehow corrupted so that weewx would no longer update Nginx. I cleared the >> memory by connecting the Logger to my Mac laptop & used WeatherLink to clear >> the archive memory. >> There was a Post by Tom in 2012 saying you could change the configuration >> of a weather envoy using the config utility in weewx as well as using the >> WeatherLink software. I did see the instructions for using wee_device to >> change the parameters of the Davis driver but when running it I get an >> unrecognized hardware error and the Weather Envoy isn’t listed as being >> supported hardware in the list of supported hardware. Only the Vantsge Vue >> and Vantsge Pro2 Consoles are listed though in the pictorial list of >> supported hardware the Weather Envoy is shown. >> Is there a way of clearing the Weather Envoy archive memory from the >> command line of the RPi so I can clear it without having to stop the RPI, >> disconnect the Envoy USB cable and connect it to my laptop to use the >> WeatherLink software to perform the clearing and then have to reconnect it >> to my RPi ?. >> >> Allan >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/e122fd87-079c-4c63-83ff-44ca9bb88cc4%40googlegroups.com. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/CAPq0zEBnKYkf3XttDegi%2BCP_jFeGYdoV-D34y-8p4aVJPLBVJw%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/0DABB0BE-FA73-439B-B274-C6DA0E06DEE8%40gmail.com.
