I have my anemometer connected to a separate sensor transmitter, with
the ISS as station 4 and the anemometer as station 3 -- I have a
neighbor with an ISS on station 1. weewx is connected to the console by
an ethernet data logger. I never touched the iss_id in weewx.conf --
it's still the default value of 1. weewx is just picking up whatever
sensors/IDs the console is configured to use. wee_device --info reports
wind on channel 3 and iss on channel 4, as expected. But I don't have
any experience with the Envoy or how to configure it.
-Les
On 8/30/19 7:49, Bob Borzelleri wrote:
I am switching to a Raspberry Pi 4 with Weewx from a PC running
Weatherlink for the past 15 years. Previously, I ran the anemometer
hard wired into the ISS which would work fine, I assume, with Weewx
seeing all sensor inputs (rain, temp/humidity/ solar radiation and
wind) from ISS = 1.
Now that I am 15 years older than when I started this weather stuff, I
no longer wish to hang off the roof in order to maintain the ISS so I
am relocating it to a spot in the yard that does not require a crane
in order to get to. I have switched the anemometer from hard wire in
the ISS to plugging into a Davis wireless sensor transmitter.
The Weewx configuration file seems to be happy seeing the ISS as
Station 1 ( ISS = 1), but adding Station 2 on the next line
(Anemometer = 2) doesn't seem to be the hot setup.
If anyone has two Davis Vantage Pro stations feeding into Weewx, I'd
appreciate seeing how they included the 2nd one in the configuration file.
BTW, the Davis Console is set up to see the 2nd station and reports
its activity. I also have an Envoy that I set up through Weathlink to
see the 2nd station (menu driven Q & A) and have it plugged into the
RPi. I reports all data from the ISS, but not the anemometer and
lists N/A alongside the Current Conditions for wind.
Now that I have just called up the page, I see that the Barometer
shows the current reading but also shows (N/A) after the reading.
Any help would be greatly appreciated.
...Bob
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/fba19644-296a-4f6a-8c2a-4b76c304d42d%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/fba19644-296a-4f6a-8c2a-4b76c304d42d%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/2d37435d-f2e4-58eb-e8ad-b6f4132b60ac%402pi.org.
