Thanks. The data logger in the Envoy is collecting wind data from the separate station, it's just not showing up in Weewx. It does show up in WeatherLink 6.0.3.
Next step is to hook up the Console with the RPi. While I do not want to locate the Console in the same room as the RPi, it will at least clear up if the issue is solely with the Envoy. Thanks again On Friday, August 30, 2019 at 10:05:16 AM UTC-7, ln77 wrote: > > I have my anemometer connected to a separate sensor transmitter, with the > ISS as station 4 and the anemometer as station 3 -- I have a neighbor with > an ISS on station 1. weewx is connected to the console by an ethernet data > logger. I never touched the iss_id in weewx.conf -- it's still the default > value of 1. weewx is just picking up whatever sensors/IDs the console is > configured to use. wee_device --info reports wind on channel 3 and iss on > channel 4, as expected. But I don't have any experience with the Envoy or > how to configure it. > > -Les > > On 8/30/19 7:49, Bob Borzelleri wrote: > > I am switching to a Raspberry Pi 4 with Weewx from a PC running > Weatherlink for the past 15 years. Previously, I ran the anemometer hard > wired into the ISS which would work fine, I assume, with Weewx seeing all > sensor inputs (rain, temp/humidity/ solar radiation and wind) from ISS = 1. > > Now that I am 15 years older than when I started this weather stuff, I no > longer wish to hang off the roof in order to maintain the ISS so I am > relocating it to a spot in the yard that does not require a crane in order > to get to. I have switched the anemometer from hard wire in the ISS to > plugging into a Davis wireless sensor transmitter. > > The Weewx configuration file seems to be happy seeing the ISS as Station > 1 ( ISS = 1), but adding Station 2 on the next line (Anemometer = 2) > doesn't seem to be the hot setup. > > If anyone has two Davis Vantage Pro stations feeding into Weewx, I'd > appreciate seeing how they included the 2nd one in the configuration file. > > BTW, the Davis Console is set up to see the 2nd station and reports its > activity. I also have an Envoy that I set up through Weathlink to see the > 2nd station (menu driven Q & A) and have it plugged into the RPi. I > reports all data from the ISS, but not the anemometer and lists N/A > alongside the Current Conditions for wind. > > Now that I have just called up the page, I see that the Barometer shows > the current reading but also shows (N/A) after the reading. > > Any help would be greatly appreciated. > > ...Bob > > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/fba19644-296a-4f6a-8c2a-4b76c304d42d%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/fba19644-296a-4f6a-8c2a-4b76c304d42d%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4a5db758-76a4-4768-91d9-fd84025e53cf%40googlegroups.com.
