On Sunday, October 13, 2019 at 5:17:45 AM UTC-4, Sean Jahnig wrote: > > > Any ideas on how to fix this problem so that it can just reconnect > successfully after a reboot? >
some consoles with usb are *always* in mode 4. for the consoles that have user-configurable mode: after power cycle, the acurite console starts up in mode 2. so there is no way to collect data from it until you physically punch the buttons to put it into mode 4 you can read about this in the weewx hardware guide: http://weewx.com/docs/hardware.htm#acurite_usb_mode for unattended operation, there are three options for reliable unattended data collection from acurite hardware: 1) get a console that does not have manual changing of usb bode (e.g., 02064 or 01536) 2) find an old acurite bridge and use the weewx-interceptor driver 3) buy a $20 SDR with weewx-sdr driver (but you need to create your own pressure sensor or use a fine offset wireless pressure sensor) m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/a8b2c367-ea66-4e56-b25b-c9d9c9eb16d6%40googlegroups.com.
