Thank you, that makes perfect sense. I'm sure I followed instructions which said to select 'Simulator'. I'll change to Fine Offset when I get home, after I've retrieved the logs. I'll also try to find out more about how to install the driver for HP1000 but google wasn't too helpful last night!
On Tuesday, 15 October 2019 15:13:04 UTC+1, Andrew Milner wrote: > > the chances are that your uniform incrementing values are the simulator > data whic I hthink looks like a sine wave!! > > chances are that you are set on simulator and are not reading any data > from the station. > > Only the log will provide the answer. the simulator does exactly what it > says, it simulates A weather station (Not a specific type) and generates > data to be put in the database which can then be used to generate reports. > It is not simulating your specific station!! > > when you post the log post from before starting weewx until at keast one > archive interval has passed - the length of the interval is whatever you > have specified in weewx.conf > > > > On Tuesday, 15 October 2019 14:51:24 UTC+3, Matt wrote: >> >> Hi All, >> >> First post. >> >> I got Weewx set up on a brand new Raspberry Pi 3 model B yesterday. I >> saw that it was posting data but last night most of the data was incorrect >> (e.g. outside temp 0 degrees C when it was actually 10 degrees). I decided >> to leave it and went to bed. Today I am seeing better values but all >> readings appear to be summing/appending to the previous reading. For >> example, the temperature has risen from 0 to around 21 degrees very >> uniformly. The actual temperature is around 13 degrees. >> >> I have an Aercus station, identical to Fine Offset HP1000. I have set >> Weewx driver to both 'simulator' and 'Fine Offset' with no change in data. >> >> I read somewhere about an HP1000 driver written by aussie susan but >> editing the daemon file was beyond my capabilities so I couldn't proceed >> with it. >> >> My station can be seen at: https://www.pwsweather.com/obs/ILITTLEW9.html# >> >> I appreciate that I will need to provide logs etc, but I am work at the >> moment and will upload logs later. I just wanted to get the post up to see >> if anyone had experienced anything similar or has any advice for a newbie. >> >> I love the functionality of weewx and look forward to using it. >> >> Many thanks in advance. >> >> Matt >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/a350f353-ffa0-4410-9256-6bbac88444ae%40googlegroups.com.
