Matt, Yes the syntax is incorrect. I can’t give you a full answer for an hour or so as I am rather occupied at the moment. Have a look at other driver install instructions and follow the same logic. Check back later if you are still having trouble and I will walk you through the installation. Ian
On Tue, 15 Oct 2019 at 17:58, Matt <[email protected]> wrote: > Thank you. I think I realise that now however I'm unable to install the > HP1000 driver as the instructions on its GitHub page aren't working for me. > > Still investigating... > > On Tue, 15 Oct 2019, 15:56 steeple ian, <[email protected]> wrote: > >> Matt, >> You need to use the HP1000 driver or Interceptor driver for this device >> not the Fine Offset one. If my memory serves me correctly the FO driver is >> for a USB device where as the HP1000 is a wireless device. >> Ian >> >> Sent from my iPhone >> >> On 15 Oct 2019, at 15:27, Matt <[email protected]> wrote: >> >> >> Thank you, that makes perfect sense. I'm sure I followed instructions >> which said to select 'Simulator'. I'll change to Fine Offset when I get >> home, after I've retrieved the logs. I'll also try to find out more about >> how to install the driver for HP1000 but google wasn't too helpful last >> night! >> >> On Tuesday, 15 October 2019 15:13:04 UTC+1, Andrew Milner wrote: >>> >>> the chances are that your uniform incrementing values are the simulator >>> data whic I hthink looks like a sine wave!! >>> >>> chances are that you are set on simulator and are not reading any data >>> from the station. >>> >>> Only the log will provide the answer. the simulator does exactly what >>> it says, it simulates A weather station (Not a specific type) and generates >>> data to be put in the database which can then be used to generate reports. >>> It is not simulating your specific station!! >>> >>> when you post the log post from before starting weewx until at keast one >>> archive interval has passed - the length of the interval is whatever you >>> have specified in weewx.conf >>> >>> >>> >>> On Tuesday, 15 October 2019 14:51:24 UTC+3, Matt wrote: >>>> >>>> Hi All, >>>> >>>> First post. >>>> >>>> I got Weewx set up on a brand new Raspberry Pi 3 model B yesterday. I >>>> saw that it was posting data but last night most of the data was incorrect >>>> (e.g. outside temp 0 degrees C when it was actually 10 degrees). I decided >>>> to leave it and went to bed. Today I am seeing better values but all >>>> readings appear to be summing/appending to the previous reading. For >>>> example, the temperature has risen from 0 to around 21 degrees very >>>> uniformly. The actual temperature is around 13 degrees. >>>> >>>> I have an Aercus station, identical to Fine Offset HP1000. I have set >>>> Weewx driver to both 'simulator' and 'Fine Offset' with no change in data. >>>> >>>> I read somewhere about an HP1000 driver written by aussie susan but >>>> editing the daemon file was beyond my capabilities so I couldn't proceed >>>> with it. >>>> >>>> My station can be seen at: >>>> https://www.pwsweather.com/obs/ILITTLEW9.html# >>>> >>>> I appreciate that I will need to provide logs etc, but I am work at the >>>> moment and will upload logs later. I just wanted to get the post up to see >>>> if anyone had experienced anything similar or has any advice for a newbie. >>>> >>>> I love the functionality of weewx and look forward to using it. >>>> >>>> Many thanks in advance. >>>> >>>> Matt >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/a350f353-ffa0-4410-9256-6bbac88444ae%40googlegroups.com >> <https://groups.google.com/d/msgid/weewx-user/a350f353-ffa0-4410-9256-6bbac88444ae%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/18C42336-65BB-409B-BC1B-2C231927FFB3%40gmail.com >> <https://groups.google.com/d/msgid/weewx-user/18C42336-65BB-409B-BC1B-2C231927FFB3%40gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/CAMz6Xq51ZY%2Bcv5Mw6H7U7-VkC74JT8CwNYHQVBJ7%3Dt8mD2sm%2Bg%40mail.gmail.com > <https://groups.google.com/d/msgid/weewx-user/CAMz6Xq51ZY%2Bcv5Mw6H7U7-VkC74JT8CwNYHQVBJ7%3Dt8mD2sm%2Bg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CADASSaSBJ%2BnWd13UjdN1TTj7OKREAueKeH70oK_hKUSjrxXB4w%40mail.gmail.com.
