Just as suspected, no windSpeed. You have "Wind" but, you need "windSpeed".
I suspect something is wrong with your sensor map. The SDR driver is not
part of WeeWX, so I am not an expert on it. Nevertheless, looking through
your earlier post of weewx.conf, we see this:
[[sensor_map]]
Rain = rain_total.0462.Acurite5n1Packet
batt = battery.0462.Acurite5n1Packet
Wind = wind_speed.0462.Acurite5n1Packet
outTemp = temperature.0462.Acurite5n1Packet
outHumidity = humidity.0462.Acurite5n1Packet
Change
Rain to rainTotal
Change
Wind to windSpeed
While you're at it, the keyword "batt" is probably wrong as well. I don't
know what the Belchertown skin expects (it's also not part of WeeWX), but
you probably want either "txBatteryStatus", or "windBatteryStatus".
See if that helps.
-tk
On Thu, Dec 19, 2019 at 3:16 PM Julio Morais <[email protected]> wrote:
> look the weewxd...
>
> Em qui., 19 de dez. de 2019 às 19:12, Thomas Keffer <[email protected]>
> escreveu:
>
>> Yes, but what values of windSpeed are you seeing in the LOOP packets?
>>
>> We also need to check the database, but let's start with the LOOP packets.
>>
>> On Thu, Dec 19, 2019 at 3:10 PM Julio Morais <[email protected]> wrote:
>>
>>> Thomas, look graphics page....there was Wind print yesterday before
>>> insert weewx-sdr drive....
>>>
>>> Em qui., 19 de dez. de 2019 às 19:03, Julio Morais <[email protected]>
>>> escreveu:
>>>
>>>> SDR is receiving....look by attachment,
>>>>
>>>> Em qui., 19 de dez. de 2019 às 18:51, Thomas Keffer <[email protected]>
>>>> escreveu:
>>>>
>>>>> I suspect the reason why you are not seeing wind speed is that the SDR
>>>>> is not receiving wind speed.
>>>>>
>>>>> Stop WeeWX, then run it directly from the command line
>>>>> <http://www.weewx.com/docs/usersguide.htm#Running_directly>. As it
>>>>> runs, it will print out the LOOP packets. Look for the type "windSpeed".
>>>>> Is
>>>>> it there? Do the values make sense?
>>>>>
>>>>> If not, then the SDR is not receiving it.
>>>>>
>>>>> -tk
>>>>>
>>>>>
>>>>> On Thu, Dec 19, 2019 at 1:03 PM Julio Morais <[email protected]>
>>>>> wrote:
>>>>>
>>>>>> Hi Thomas,
>>>>>>
>>>>>> RTL_433 is reading wind_speed in km / h and temp in ºF. In StdReport
>>>>>> ... Groups I converted all drives, including Wind to km_per_hour. Is this
>>>>>> not the reason why I don't read wind_speed in Apache (/A)
>>>>>> Sorry about this question!
>>>>>>
>>>>>> Em qui., 19 de dez. de 2019 às 14:09, Julio Morais <
>>>>>> [email protected]> escreveu:
>>>>>>
>>>>>>> Hi Thomas,
>>>>>>>
>>>>>>> That simple?!
>>>>>>> This was the same operation I did in days past that crashed
>>>>>>> Apache..... but now it's working fine, the readings as configured and
>>>>>>> the
>>>>>>> updated date and time!
>>>>>>> Now I need to study why the wind does not appear ?! Barometer is
>>>>>>> installed on RPI but I last configuration was not good....I´ll try
>>>>>>> again .
>>>>>>> [image: image.png]
>>>>>>>
>>>>>>>
>>>>>>> Thanks so much!
>>>>>>>
>>>>>>> Em qua., 18 de dez. de 2019 às 20:32, Thomas Keffer <
>>>>>>> [email protected]> escreveu:
>>>>>>>
>>>>>>>> If you want metric units, just follow the instructions in the
>>>>>>>> section *How to change units
>>>>>>>> <http://www.weewx.com/docs/customizing.htm#how_to_change_units>* in
>>>>>>>> the Customizing Guide.
>>>>>>>>
>>>>>>>> -tk
>>>>>>>>
>>>>>>>> On Wed, Dec 18, 2019 at 4:25 PM Julio Morais <[email protected]>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Hi Thomas,
>>>>>>>>> After a battle to reinstall everything again, some more conflicts,
>>>>>>>>> I finally got it! I did nothing about the units that remain in °
>>>>>>>>> F. I await instructions!
>>>>>>>>> Attached are some files that demonstrate the operation of SDR and
>>>>>>>>> RTL_433; also skin.conf (Seasons). Apache had problems but is now
>>>>>>>>> updating well and real.
>>>>>>>>> Regarding the drives, I suppose I would have to configure both
>>>>>>>>> Weewx.conf and skin.conf, is that it?
>>>>>>>>>
>>>>>>>>> Thank you!
>>>>>>>>>
>>>>>>>>> Em qua., 18 de dez. de 2019 às 09:04, Julio Morais <
>>>>>>>>> [email protected]> escreveu:
>>>>>>>>>
>>>>>>>>>> Hi Thomas,
>>>>>>>>>>
>>>>>>>>>> Wait a few hours because I am reinstalling everything again
>>>>>>>>>> (Debian, WEEWX, SDR .... etc) to get back to a cleaner install. I'll
>>>>>>>>>> be back soon with the requested information.
>>>>>>>>>> Thank you!
>>>>>>>>>>
>>>>>>>>>> Em qua., 18 de dez. de 2019 às 08:07, Thomas Keffer <
>>>>>>>>>> [email protected]> escreveu:
>>>>>>>>>>
>>>>>>>>>>> NO! The option target_unit is for the units *in the database*.
>>>>>>>>>>> Don't mess with that. It has nothing to do with how the units are
>>>>>>>>>>> displayed. If you change it now, you'll wreck your database.
>>>>>>>>>>>
>>>>>>>>>>> Let's see your [StdReport] section.
>>>>>>>>>>>
>>>>>>>>>>> -tk
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Dec 17, 2019 at 10:28 PM Xant <[email protected]>
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Julio
>>>>>>>>>>>>
>>>>>>>>>>>> For clarification, let's start with the basics. Have you
>>>>>>>>>>>> properly checked "target_unit = US # Options are 'US',
>>>>>>>>>>>> 'METRICWX', or
>>>>>>>>>>>> 'METRIC' " in weewx.conf?
>>>>>>>>>>>>
>>>>>>>>>>>> X
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>>> it, send an email to [email protected].
>>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/96d4e1d7-7873-4d02-98f7-9f97f109bcc8%40googlegroups.com
>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/96d4e1d7-7873-4d02-98f7-9f97f109bcc8%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>> .
>>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>> it, send an email to [email protected].
>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEC63Yep5QTC3Ans%3DGgWMp7pSZNWVYeKW%2BGX%3D16EKvNhEA%40mail.gmail.com
>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEC63Yep5QTC3Ans%3DGgWMp7pSZNWVYeKW%2BGX%3D16EKvNhEA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>> .
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> *Julio Morais *
>>>>>>>>>> *Ipatinga, MG*
>>>>>>>>>> *BRASIL*
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> *Julio Morais *
>>>>>>>>> *Ipatinga, MG*
>>>>>>>>> *BRASIL*
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>>> Groups "weewx-user" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>> send an email to [email protected].
>>>>>>>>> To view this discussion on the web visit
>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/CANW6cHWA8eQuO_%3DDeLz0Ttv7V3syz0d35NiwqtVhk5ui3szd0A%40mail.gmail.com
>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/CANW6cHWA8eQuO_%3DDeLz0Ttv7V3syz0d35NiwqtVhk5ui3szd0A%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>>>>>> .
>>>>>>>>>
>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups "weewx-user" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send an email to [email protected].
>>>>>>>> To view this discussion on the web visit
>>>>>>>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEADHZ44naORj1MDCAJ%2B1roCZ0eNT41EwGTvN7y%3D2ifrvA%40mail.gmail.com
>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEADHZ44naORj1MDCAJ%2B1roCZ0eNT41EwGTvN7y%3D2ifrvA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>>>>> .
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> *Julio Morais *
>>>>>>> *Ipatinga, MG*
>>>>>>> *BRASIL*
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> *Julio Morais *
>>>>>> *Ipatinga, MG*
>>>>>> *BRASIL*
>>>>>>
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "weewx-user" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to [email protected].
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/weewx-user/CANW6cHXmDbEP8-9%2BXB269QgiC-nVUp_TAjz%2B4hDHdk%2BiuMerwQ%40mail.gmail.com
>>>>>> <https://groups.google.com/d/msgid/weewx-user/CANW6cHXmDbEP8-9%2BXB269QgiC-nVUp_TAjz%2B4hDHdk%2BiuMerwQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>>> .
>>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to [email protected].
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEBgaEjB5rg92gGJtmxT-6MDeo9DCaN%2Bn6%2BsKSEGzOMwPw%40mail.gmail.com
>>>>> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEBgaEjB5rg92gGJtmxT-6MDeo9DCaN%2Bn6%2BsKSEGzOMwPw%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>>
>>>>
>>>> --
>>>> *Julio Morais *
>>>> *Ipatinga, MG*
>>>> *BRASIL*
>>>>
>>>>
>>>>
>>>
>>> --
>>> *Julio Morais *
>>> *Ipatinga, MG*
>>> *BRASIL*
>>>
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/CANW6cHUpn%2B6uynFadmYCx4LJPGdMJ0gYT5yhZPMnrZEeV0Kexg%40mail.gmail.com
>>> <https://groups.google.com/d/msgid/weewx-user/CANW6cHUpn%2B6uynFadmYCx4LJPGdMJ0gYT5yhZPMnrZEeV0Kexg%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEBr9JTeyE%2BdDSTq6P2-y16xr2LG%2B9mnn7MiPom-e18UGA%40mail.gmail.com
>> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEBr9JTeyE%2BdDSTq6P2-y16xr2LG%2B9mnn7MiPom-e18UGA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>> .
>>
>
>
> --
> *Julio Morais *
> *Ipatinga, MG*
> *BRASIL*
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/CANW6cHU0HaQu59MYgZJ%2BCrB1jwryiOukbFL89LJ%3DGJHt_7a3vQ%40mail.gmail.com
> <https://groups.google.com/d/msgid/weewx-user/CANW6cHU0HaQu59MYgZJ%2BCrB1jwryiOukbFL89LJ%3DGJHt_7a3vQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CAPq0zEDGSDDY7MjKEpS8_8MkoeUyP0s1FPVH5151Ysx0GW_8ww%40mail.gmail.com.
