No problem....it is one possible solution. With that sensor you get Pressure, Temp, Humidity, and Altitude. I been using that sensor for awhile and its been within 0.25 mbars of my Davis console. You are using a RPI?
On Tuesday, December 24, 2019 at 12:40:30 AM UTC-5, Gert Andersen wrote: > > Hi > > Thanks, I'll do further investigations. At least it's possible. > > Gert > > On Monday, December 23, 2019 at 11:50:28 PM UTC+1, rich T wrote: >> >> I'm using a I2C BME280 Sensor and this driver >> https://gitlab.com/wjcarpenter/bme280wx. >> >> On Monday, December 23, 2019 at 5:40:55 PM UTC-5, Gert Andersen wrote: >>> >>> Hi >>> I'm running a configuration with the Ecowitt GW1000/Froggit DP1500(no >>> console) and some senors (rain, wind temp, etc). Data from these sensors >>> are received via the weewx SDR driver and rtl_433. So the GW1000 is not >>> seen by the SDR system and therefore no pressure data are received. >>> >>> Question, it it possible to add a pressure sensor, which can be seen >>> from the SDR driver or is there another solution. >>> >>> Thanks >>> Gert >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/30d296a5-f0ce-4845-966b-d422ee59944e%40googlegroups.com.
