Hi yes, I'm using a RPI. I'll pick one up and start to play with it.
Gert On Tuesday, December 24, 2019 at 6:50:34 AM UTC+1, rich T wrote: > > No problem....it is one possible solution. With that sensor you > get Pressure, Temp, Humidity, and Altitude. I been using that sensor for > awhile and its been within 0.25 mbars of my Davis console. You are using a > RPI? > > On Tuesday, December 24, 2019 at 12:40:30 AM UTC-5, Gert Andersen wrote: >> >> Hi >> >> Thanks, I'll do further investigations. At least it's possible. >> >> Gert >> >> On Monday, December 23, 2019 at 11:50:28 PM UTC+1, rich T wrote: >>> >>> I'm using a I2C BME280 Sensor and this driver >>> https://gitlab.com/wjcarpenter/bme280wx. >>> >>> On Monday, December 23, 2019 at 5:40:55 PM UTC-5, Gert Andersen wrote: >>>> >>>> Hi >>>> I'm running a configuration with the Ecowitt GW1000/Froggit DP1500(no >>>> console) and some senors (rain, wind temp, etc). Data from these sensors >>>> are received via the weewx SDR driver and rtl_433. So the GW1000 is not >>>> seen by the SDR system and therefore no pressure data are received. >>>> >>>> Question, it it possible to add a pressure sensor, which can be seen >>>> from the SDR driver or is there another solution. >>>> >>>> Thanks >>>> Gert >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/8e68eb12-50a8-41bb-9ddc-034ef6063629%40googlegroups.com.
