I installed and do not have wind info.
I have installed the new interceptor and run weewx directly. I was unable
to run interceptor directly, but likely my error.
I have a 2902a sensor for rain, UV, and wind, an Ecowitt WH32 for outdoor
temp and humidity and a WH25B for indoor temp, humidity, and barometric
pressure.
All was working fine when I was using a patched interceptor for the GW1000
gary@weewx1:~/Downloads$ PYTHONPATH=/home/weewx python
/home/weewx/bin/user/interceptor.py --device=fineoffset-bridge --port 8000
--debug
Traceback (most recent call last):
File "/home/weewx/bin/user/interceptor.py", line 299, in <module>
import weewx.drivers
ImportError: No module named weewx.drivers
gary@weewx1:~/Downloads$ sudo /home/weewx/bin/weewxd /home/weewx/weewx.conf
LOOP: 2019-12-30 21:41:25 EST (1577760085) altimeter: 29.3896523535,
barometer: 29.4207585752, cloudbase: 645.979046331, dateTime: 1577760085,
dewpoint: 30.9910300862, heatindex: 32.0, humidex: 32.0, inDewpoint:
39.1192997709, inHumidity: 30.0, inTemp: 72.3, maxSolarRad: 0.0,
outHumidity: 96.0, outTemp: 32.0, pressure: 28.957, rain_period: 800,
rainRate: 0, usUnits: 1, UV: 0.0
LOOP: 2019-12-30 21:41:42 EST (1577760102) altimeter: 29.3896523535,
barometer: 29.4207585752, cloudbase: 645.979046331, dateTime: 1577760102,
dewpoint: 30.9910300862, heatindex: 32.0, humidex: 32.0, inDewpoint:
39.1192997709, inHumidity: 30.0, inTemp: 72.3, maxSolarRad: 0.0,
outHumidity: 96.0, outTemp: 32.0, pressure: 28.957, rain_period: 800,
rainRate: 0, usUnits: 1, UV: 0.0
LOOP: 2019-12-30 21:41:59 EST (1577760119) altimeter: 29.3926893485,
barometer: 29.4238066215, cloudbase: 645.979046331, dateTime: 1577760119,
dewpoint: 30.9910300862, heatindex: 32.0, humidex: 32.0, inDewpoint:
38.946639779, inHumidity: 30.0, inTemp: 72.1, maxSolarRad: 0.0,
outHumidity: 96.0, outTemp: 32.0, pressure: 28.96, rain_period: 800,
rainRate: 0, usUnits: 1, UV: 0.0
LOOP: 2019-12-30 21:42:16 EST (1577760136) altimeter: 29.3926893485,
barometer: 29.4238066215, cloudbase: 645.979046331, dateTime: 1577760136,
dewpoint: 30.9910300862, heatindex: 32.0, humidex: 32.0, inDewpoint:
38.946639779, inHumidity: 30.0, inTemp: 72.1, maxSolarRad: 0.0,
outHumidity: 96.0, outTemp: 32.0, pressure: 28.96, rain_period: 800,
rainRate: 0, usUnits: 1, UV: 0.0
LOOP: 2019-12-30 21:42:33 EST (1577760153) altimeter: 29.3926893485,
barometer: 29.4238066215, cloudbase: 645.979046331, dateTime: 1577760153,
dewpoint: 30.9910300862, heatindex: 32.0, humidex: 32.0, inDewpoint:
38.946639779, inHumidity: 30.0, inTemp: 72.1, maxSolarRad: 0.0,
outHumidity: 96.0, outTemp: 32.0, pressure: 28.96, rain_period: 800,
rainRate: 0, usUnits: 1, UV: 0.0
On Sunday, December 29, 2019 at 11:59:56 PM UTC-5, mwall wrote:
>
> the weewx-interceptor driver has been updated with explicit support for
> the gw1000 wifi bridge, as well as support for weewx4/python3.
>
> instructions are at the weewx wiki:
>
> https://github.com/weewx/weewx/wiki/gw1000-recipe
>
> i would especially appreciate feedback from anyone with full sensor arrays
> (wind, rain, uv), particulate sensors, soil moisture sensors, and any other
> extended sensors offered by ecowitt.
>
> although the interceptor will now understand the extended weather
> underground protocol, the 'fineoffset-bridge' type uses the ecowitt
> protocol and a direct-to-weewx configuration (no dns hijack or sniffing or
> other shenanigans required). it does require a recent firmware on the
> gw1000 (testing with 1.5.5)
>
> m
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/84155cfd-1e48-4305-9b72-e2e6fa18b6e7%40googlegroups.com.
