Hi, I hope that somebody can explain it to me. I use weewx for 3 years now. My first weather stations WH1080 just died. Its memory is completely dead, do not stores any data and Weewx is not able communicate with station over usb. So I got new station. It is again WH1080.
With same configuration as before, like 5 minutes archive_interval the station will again die in 3 years. I would like to avoid that. Therefore I have deiced to use archive_interval 30 minutes, to save memory from too many writes.Still I would like to update date by weewx more often then every 30 minutes. If I understand correctly Weewx is able to read just live data from Weather station, so there should be no real reason to use internal memory of device. So when software data generation is configured, pooling is set to 10 minutes weewx should simply created its outputs every 10 minutes from its own software database located on server and then push data to ftp. Still, it does not work like this. Whatever I configure, weewx ignores it and use station hardware archive_interval and output is generated only every 30 minutes. My question is, why does weewx has option like archive_interval if it is ignored or what is the reason for pooling from station every 60 seconds, when archive interval is much longer? I was reading all posts here regarding weewx and Fineoffset stations. Still I do not see a way how to make it work better. Thanks :o) -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/33ff8dc2-5cf9-49d2-a948-807ebb48c714%40googlegroups.com.
