Although no GW1000, but with a Fine Offset WS2900 clone, I also used the
instructions as described in your link with the ecowitt-client and
interceptor.py version 0.49. Additionally I have changed line 2234 to
'wh65batt': 'battery',
PYTHONPATH=/usr/share/weewx/ python bin/user/interceptor.py
--device=ecowitt-client --mode=listen --port=9000 --debug
gives these results:
Jan 10 21:23:07 raspbee interceptor.py: interceptor: MainThread: mode is
> listen
> Jan 10 21:23:07 raspbee interceptor.py: interceptor: MainThread: listen on
> :9000
> Jan 10 21:23:07 raspbee interceptor.py: interceptor: ServerThread: start
> tcp server
> Jan 10 21:23:40 raspbee interceptor.py: interceptor: MainThread: mode is
> listen
> Jan 10 21:23:40 raspbee interceptor.py: interceptor: MainThread: listen on
> :9000
> Jan 10 21:23:40 raspbee interceptor.py: interceptor: ServerThread: start
> tcp server
> Jan 10 21:24:26 raspbee interceptor.py: interceptor: ServerThread: POST:
> PASSKEY=XXXX&stationtype=EasyWeatherV1.4.5&dateutc=2020-01-10+20:24:25&tempinf=61.5&humidityin=59&baromrelin=30.175&baromabsin=29.380&tempf=39.7&humidity=91&winddir=296&windspeedmph=2.5&windgustmph=3.4&maxdailygust=13.6&rainratein=0.000&eventrainin=0.512&hourlyrainin=0.000&dailyrainin=0.303&weeklyrainin=0.571&monthlyrainin=1.083&totalrainin=1.772&solarradiation=0.00&uv=0&wh65batt=0&freq=868M&model=WS2900_V2.01.08
> Jan 10 21:24:26 raspbee interceptor.py: interceptor: MainThread: ignored
> parameter eventrainin=0.512
> Jan 10 21:24:26 raspbee interceptor.py: interceptor: MainThread: ignored
> parameter maxdailygust=13.6
> Jan 10 21:24:26 raspbee interceptor.py: interceptor: MainThread: ignored
> parameter monthlyrainin=1.083
> Jan 10 21:24:26 raspbee interceptor.py: interceptor: MainThread: ignored
> parameter PASSKEY=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
> Jan 10 21:24:26 raspbee interceptor.py: interceptor: MainThread: ignored
> parameter hourlyrainin=0.000
> Jan 10 21:24:26 raspbee interceptor.py: interceptor: MainThread: ignored
> parameter freq=868M
> Jan 10 21:24:26 raspbee interceptor.py: interceptor: MainThread: ignored
> parameter model=WS2900_V2.01.08
> Jan 10 21:24:26 raspbee interceptor.py: interceptor: MainThread: ignored
> parameter dailyrainin=0.303
> Jan 10 21:24:26 raspbee interceptor.py: interceptor: MainThread: ignored
> parameter stationtype=EasyWeatherV1.4.5
> Jan 10 21:24:26 raspbee interceptor.py: interceptor: MainThread: ignored
> parameter weeklyrainin=0.571
> Jan 10 21:24:26 raspbee interceptor.py: interceptor: MainThread: skipping
> rain measurement of 1.772: no last rain
>
>
still no rain today.....
Am Montag, 30. Dezember 2019 05:59:56 UTC+1 schrieb mwall:
>
> the weewx-interceptor driver has been updated with explicit support for
> the gw1000 wifi bridge, as well as support for weewx4/python3.
>
> instructions are at the weewx wiki:
>
> https://github.com/weewx/weewx/wiki/gw1000-recipe
>
> i would especially appreciate feedback from anyone with full sensor arrays
> (wind, rain, uv), particulate sensors, soil moisture sensors, and any other
> extended sensors offered by ecowitt.
>
> although the interceptor will now understand the extended weather
> underground protocol, the 'fineoffset-bridge' type uses the ecowitt
> protocol and a direct-to-weewx configuration (no dns hijack or sniffing or
> other shenanigans required). it does require a recent firmware on the
> gw1000 (testing with 1.5.5)
>
> m
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/216cecde-bd7f-4601-ad37-82de1310423d%40googlegroups.com.
