I just changed over from a Lacross Gateway to an Ambient WS-2000 and an
ECOWITT GW1000BU. I loaded the updated interceptor, everything working
pretty well with a couple of issues.
1. I had to change the mapping in the driver for solarradiation. the
driver mapped solarradiation to solar_radiation but solar_radiation was not
going to radiation in the Database. I changed Line 2325 from 'radiation':
'radiation', to 'radiation': 'solar_radiation', and that fixed the issue.
Is there a way to do this in weewx.conf? I did try adding a sensor map in
wwewx.conf, but it wants the whole map not just the one override so I went
back to my changed driver. I also fixed the spelling for yearlyrain on
line 2356.
2. I have 3 unrecognized parametes for my Air Quality they are: sensor
pm25_ch1 , pm25batt1 and pm25_avg_24h_ch1. I can add then to the ignore
list for now, but need to figure out a place for the data in the DB and
then I can use it.
Here is my data dump..
raw data: PASSKEY=XXXX&stationtype=GW1000B_V1.5.5&dateutc=2020-01-11+15:47:
05&tempinf=68.4&humidityin=31&baromrelin=30.047&baromabsin=25.670&tempf=26.2
&humidity=68&winddir=136&windspeedmph=0.00&windgustmph=1.12&maxdailygust=
12.53&solarradiation=38.53&uv=0&rainratein=0.000&eventrainin=0.000&
hourlyrainin=0.000&dailyrainin=0.000&weeklyrainin=0.000&monthlyrainin=0.000&
yearlyrainin=0.000&totalrainin=0.000&pm25_ch1=8.0&pm25_avg_24h_ch1=11.4&
wh65batt=0&pm25batt1=5&freq=915M&model=GW1000_Pro
raw packet: {'wind_speed': 0.0, 'humidity_in': 31.0, 'temperature_in': 68.4,
'solar_radiation': 38.53, 'wind_gust': 1.12, 'humidity_out': 68.0, 'uv': 0.0
, 'rain': None, 'dateTime': 1578757625, 'pressure': 25.67, 'temperature_out'
: 26.2, 'wind_dir': 136.0, 'battery_wind': 0.0, 'rain_total': 0.0,
'rain_rate': 0.0, 'usUnits': 1}
mapped packet: {'pressure': 25.67, 'outHumidity': 68.0, 'UV': 0.0,
'dateTime': 1578757625, 'windDir': 136.0, 'outTemp': 26.2, 'windSpeed': 0.0,
'inHumidity': 31.0, 'inTemp': 68.4, 'windGust': 1.12, 'rain_total': 0.0,
'rainRate': 0.0, 'usUnits': 1}
THanks for the awesome driver!
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/dde337ce-95ca-41af-a58e-394c6c2dfc3c%40googlegroups.com.
