Hi Iain,
I have found the weewx.conf for the system that had the pool sensor.
[SDR]
driver = user.sdr
path = /usr/local/bin
[[sensor_map]]
# station
windGust = wind_gust.174.FOWHx080Packet
outTempBatteryStatus = battery.174.FOWHx080Packet
rain_total = rain_total.174.FOWHx080Packet
windSpeed = wind_speed.174.FOWHx080Packet
windDir = wind_dir.174.FOWHx080Packet
outHumidity = humidity.174.FOWHx080Packet
outTemp = temperature.174.FOWHx080Packet
# prologue - hall
inHumidity = humidity.133.ProloguePacket
inTemp = temperature.133.ProloguePacket
inTempBatteryStatus = battery.133.ProloguePacket
# acurite - back deck
extraTemp1 = temperature.32D1.AcuriteTowerPacket
#extraHumid1 = humidity.32D1.AcuriteTowerPacket
txBatteryStatus = battery.32D1.AcuriteTowerPacket
# digoo - downstairs
extraTemp2 = temperature.1:180.NexusTemperaturePacket
extraHumid1 = humidity.1:180.NexusTemperaturePacket
windBatteryStatus = battery.1:180.NexusTemperaturePacket
# WT0124 - pool
extraTemp3 = temperature.122.WT0124Packet
The sensor build is not very good, the o-ring seal is crap and water got in
and it failed pretty quick !!
Gary
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/79525dbf-0cbb-48e0-a4b0-644d63d29e50%40googlegroups.com.
