Thank you. TBH I'd forgotten it was even there till the SDR picked it up :)
Thanks again, ig. On Monday, February 3, 2020 at 5:09:02 PM UTC-5, Gazza wrote: > > > Hi Iain, > > I have found the weewx.conf for the system that had the pool sensor. > > [SDR] > > driver = user.sdr > path = /usr/local/bin > > [[sensor_map]] > > # station > windGust = wind_gust.174.FOWHx080Packet > outTempBatteryStatus = battery.174.FOWHx080Packet > rain_total = rain_total.174.FOWHx080Packet > windSpeed = wind_speed.174.FOWHx080Packet > windDir = wind_dir.174.FOWHx080Packet > outHumidity = humidity.174.FOWHx080Packet > outTemp = temperature.174.FOWHx080Packet > > # prologue - hall > inHumidity = humidity.133.ProloguePacket > inTemp = temperature.133.ProloguePacket > inTempBatteryStatus = battery.133.ProloguePacket > > # acurite - back deck > extraTemp1 = temperature.32D1.AcuriteTowerPacket > #extraHumid1 = humidity.32D1.AcuriteTowerPacket > txBatteryStatus = battery.32D1.AcuriteTowerPacket > > # digoo - downstairs > extraTemp2 = temperature.1:180.NexusTemperaturePacket > extraHumid1 = humidity.1:180.NexusTemperaturePacket > windBatteryStatus = battery.1:180.NexusTemperaturePacket > > # WT0124 - pool > extraTemp3 = temperature.122.WT0124Packet > > The sensor build is not very good, the o-ring seal is crap and water got > in and it failed pretty quick !! > > > Gary > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4acd11e6-52ff-4483-bed3-6851f06e4c7b%40googlegroups.com.
