Here are my own raw and mapped packets below.
raw packet: {'dateTime': 1593980890, 'usUnits': 1, 'temperature_in': 66.7,
'humidity_in': 66.0, 'pressure': 29.651, 'temperature_out': 57.0,
'humidity_out': 71.0, 'wind_dir': 11.0, 'wind_speed': 2.68, 'wind_gust':
4.47, 'solar_radiation': 1.71, 'uv': 0.0, 'rain_rate': 0.0, 'rain_total':
0.65, 'wh65_battery': 0.0, 'rain': 0.0} mapped packet: {'dateTime':
1593980890, 'usUnits': 1, 'pressure': 29.651, 'outHumidity': 71.0,
'inHumidity': 66.0, 'outTemp': 57.0, 'inTemp': 66.7, 'windSpeed': 2.68,
'windGust': 4.47, 'windDir': 11.0, 'radiation': 1.71, 'rain': 0.0,
'rainRate': 0.0, 'UV': 0.0}
You are using an identical sensor to me but if you look carefully, you are
not receiving data from all the sensors. I do not think this is an issue
with weather34.py. I am not sure why your settings mapping should be
different to mine, but it may be worth setting up mapping by adding
something like this to your interceptor stanza: -
[[sensor_map]]
outTemp = temperature_out
windSpeed = wind_speed
carry on mapping in the same fashion to the names that WeeWX expects and
then restart WeeWX and see what happens
raw packet: {'dateTime': 1593980890, 'usUnits': 1, 'temperature_in':
66.7, 'humidity_in': 66.0, 'pressure': 29.651, 'temperature_out':
57.0, 'humidity_out': 71.0, 'wind_dir': 11.0, 'wind_speed': 2.68,
'wind_gust': 4.47, 'solar_radiation': 1.71, 'uv': 0.0, 'rain_rate':
0.0, 'rain_total': 0.65, 'wh65_battery': 0.0, 'rain': 0.0}
mapped packet: {'dateTime': 1593980890, 'usUnits': 1, 'pressure':
29.651, 'outHumidity': 71.0, 'inHumidity': 66.0, 'outTemp': 57.0,
'inTemp': 66.7, 'windSpeed': 2.68, 'windGust': 4.47, 'windDir': 11.0,
'radiation': 1.71, 'rain': 0.0, 'rainRate': 0.0, 'UV': 0.0}
On Sun, 5 Jul 2020 at 19:29, 'Season Ticket' via weewx-user <
[email protected]> wrote:
> I updated the interceptor port and WSView port to 8000 but I get the same
> results. Are there any other changes you can suggest?
>
> On Sunday, 5 July 2020 14:06:52 UTC+1, steeple ian wrote:
>>
>> Hi Simon,
>> I have recently made the same switch.
>>
>> You need to open up a port in your router and reflect this in your
>> interceptor stanza in weewx.conf
>>
>> This is mine for example: -
>>
>>
>> [Interceptor]
>> # This section is for the network traffic interceptor driver.
>>
>> # The driver to use:
>> driver = user.interceptor
>> device_type = ecowitt-client
>> port = 8000
>>
>> Regards,
>> Ian
>>
>> On Sun, 5 Jul 2020 at 10:27, 'Season Ticket' via weewx-user <
>> [email protected]> wrote:
>>
>>> I have just changed my configuration of weewx.conf interceptor driver
>>> from observer to ecowitt-client and updated the WSView app to use Ecowitt
>>> protocol
>>>
>>> # device_type = observer
>>> device_type = ecowitt-client
>>>
>>> However the data being sent to weather 34 is now almost gone. below is
>>> an example of the w34realtime.txt
>>>
>>>
>>> 05/07/20 10:18:02 NULL NULL NULL 0.0 0.0 NULL 0.0 0.0 NULL --- 0 m/s C
>>> mb mm 0.0 NULL 4.3 163.8 0.0 17.5 54 NULL NULL NULL NULL NULL NULL 0.0
>>> 00:01 0.0 00:01 NULL NULL NULL NULL 4.0.0 0 0.0 NULL NULL 9.0 NULL 975 NULL
>>> 0.0 0 1 0 --- NULL m NULL 5.5 NULL 0
>>>
>>>
>>> here is an example of the packet data that I'm now getting.
>>>
>>> Jul 5 10:24:20 raspberrypi weewx[518] DEBUG user.interceptor: raw
>>> packet: {'wind_speed': 0.0, 'humidity_in': 22.0, 'temperature_in': 107.2,
>>> 'temperature_1': 64.94, 'solar_radiation': 894.89, 'wind_gust': 0.0,
>>> 'wh65_battery': 0.0, 'humidity_out': 52.0, 'uv': 8.0, 'battery_1': 0.0,
>>> 'dateTime': 1593941058, 'pressure': 29.4, 'temperature_out': 64.4,
>>> 'wind_dir': 23.0, 'rain': 0.0, 'rain_total': 0.169, 'rain_rate': 0.0,
>>> 'usUnits': 1, 'humidity_1': 53.0}
>>> Jul 5 10:24:20 raspberrypi weewx[518] DEBUG user.interceptor: mapped
>>> packet: {'UV': 8.0, 'extraHumid1': 53.0, 'radiation': 894.89, 'rain': 0.0,
>>> 'dateTime': 1593941058, 'windDir': 23.0, 'pressure': 29.4, 'windSpeed':
>>> 0.0, 'inHumidity': 53.0, 'inTemp': 64.94, 'windGust': 0.0, 'rainRate': 0.0,
>>> 'usUnits': 1, 'extraTemp1': 64.94}
>>>
>>>
>>> any advise on what settings I have missed?
>>>
>>> Thanks Simon
>>>
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/fe6501a2-7e8c-412f-b461-168c81ac27beo%40googlegroups.com
>>> <https://groups.google.com/d/msgid/weewx-user/fe6501a2-7e8c-412f-b461-168c81ac27beo%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/a1e378bc-53dd-450e-b0a7-7eb7cee27ea5o%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/a1e378bc-53dd-450e-b0a7-7eb7cee27ea5o%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CADASSaRza0bW2OhEVJPS%3D2BQOEo4cwjUuNZHu4JuCHeTvyaRsw%40mail.gmail.com.
