thanks Ian, I've corrected the mapping and its now working.
On Sunday, 5 July 2020 21:55:11 UTC+1, steeple ian wrote:
>
> Here are my own raw and mapped packets below.
>
> raw packet: {'dateTime': 1593980890, 'usUnits': 1, 'temperature_in': 66.7,
> 'humidity_in': 66.0, 'pressure': 29.651, 'temperature_out': 57.0,
> 'humidity_out': 71.0, 'wind_dir': 11.0, 'wind_speed': 2.68, 'wind_gust':
> 4.47, 'solar_radiation': 1.71, 'uv': 0.0, 'rain_rate': 0.0, 'rain_total':
> 0.65, 'wh65_battery': 0.0, 'rain': 0.0} mapped packet: {'dateTime':
> 1593980890, 'usUnits': 1, 'pressure': 29.651, 'outHumidity': 71.0,
> 'inHumidity': 66.0, 'outTemp': 57.0, 'inTemp': 66.7, 'windSpeed': 2.68,
> 'windGust': 4.47, 'windDir': 11.0, 'radiation': 1.71, 'rain': 0.0,
> 'rainRate': 0.0, 'UV': 0.0}
>
> You are using an identical sensor to me but if you look carefully, you are
> not receiving data from all the sensors. I do not think this is an issue
> with weather34.py. I am not sure why your settings mapping should be
> different to mine, but it may be worth setting up mapping by adding
> something like this to your interceptor stanza: -
>
> [[sensor_map]]
>
> outTemp = temperature_out
> windSpeed = wind_speed
>
> carry on mapping in the same fashion to the names that WeeWX expects and
> then restart WeeWX and see what happens
>
>
> raw packet: {'dateTime': 1593980890, 'usUnits': 1, 'temperature_in': 66.7,
> 'humidity_in': 66.0, 'pressure': 29.651, 'temperature_out': 57.0,
> 'humidity_out': 71.0, 'wind_dir': 11.0, 'wind_speed': 2.68, 'wind_gust':
> 4.47, 'solar_radiation': 1.71, 'uv': 0.0, 'rain_rate': 0.0, 'rain_total':
> 0.65, 'wh65_battery': 0.0, 'rain': 0.0}
> mapped packet: {'dateTime': 1593980890, 'usUnits': 1, 'pressure': 29.651,
> 'outHumidity': 71.0, 'inHumidity': 66.0, 'outTemp': 57.0, 'inTemp': 66.7,
> 'windSpeed': 2.68, 'windGust': 4.47, 'windDir': 11.0, 'radiation': 1.71,
> 'rain': 0.0, 'rainRate': 0.0, 'UV': 0.0}
>
>
> On Sun, 5 Jul 2020 at 19:29, 'Season Ticket' via weewx-user <
> [email protected] <javascript:>> wrote:
>
>> I updated the interceptor port and WSView port to 8000 but I get the same
>> results. Are there any other changes you can suggest?
>>
>> On Sunday, 5 July 2020 14:06:52 UTC+1, steeple ian wrote:
>>>
>>> Hi Simon,
>>> I have recently made the same switch.
>>>
>>> You need to open up a port in your router and reflect this in your
>>> interceptor stanza in weewx.conf
>>>
>>> This is mine for example: -
>>>
>>>
>>> [Interceptor]
>>> # This section is for the network traffic interceptor driver.
>>>
>>> # The driver to use:
>>> driver = user.interceptor
>>> device_type = ecowitt-client
>>> port = 8000
>>>
>>> Regards,
>>> Ian
>>>
>>> On Sun, 5 Jul 2020 at 10:27, 'Season Ticket' via weewx-user <
>>> [email protected]> wrote:
>>>
>>>> I have just changed my configuration of weewx.conf interceptor driver
>>>> from observer to ecowitt-client and updated the WSView app to use Ecowitt
>>>> protocol
>>>>
>>>> # device_type = observer
>>>> device_type = ecowitt-client
>>>>
>>>> However the data being sent to weather 34 is now almost gone. below is
>>>> an example of the w34realtime.txt
>>>>
>>>>
>>>> 05/07/20 10:18:02 NULL NULL NULL 0.0 0.0 NULL 0.0 0.0 NULL --- 0 m/s C
>>>> mb mm 0.0 NULL 4.3 163.8 0.0 17.5 54 NULL NULL NULL NULL NULL NULL 0.0
>>>> 00:01 0.0 00:01 NULL NULL NULL NULL 4.0.0 0 0.0 NULL NULL 9.0 NULL 975
>>>> NULL
>>>> 0.0 0 1 0 --- NULL m NULL 5.5 NULL 0
>>>>
>>>>
>>>> here is an example of the packet data that I'm now getting.
>>>>
>>>> Jul 5 10:24:20 raspberrypi weewx[518] DEBUG user.interceptor: raw
>>>> packet: {'wind_speed': 0.0, 'humidity_in': 22.0, 'temperature_in': 107.2,
>>>> 'temperature_1': 64.94, 'solar_radiation': 894.89, 'wind_gust': 0.0,
>>>> 'wh65_battery': 0.0, 'humidity_out': 52.0, 'uv': 8.0, 'battery_1': 0.0,
>>>> 'dateTime': 1593941058, 'pressure': 29.4, 'temperature_out': 64.4,
>>>> 'wind_dir': 23.0, 'rain': 0.0, 'rain_total': 0.169, 'rain_rate': 0.0,
>>>> 'usUnits': 1, 'humidity_1': 53.0}
>>>> Jul 5 10:24:20 raspberrypi weewx[518] DEBUG user.interceptor: mapped
>>>> packet: {'UV': 8.0, 'extraHumid1': 53.0, 'radiation': 894.89, 'rain': 0.0,
>>>> 'dateTime': 1593941058, 'windDir': 23.0, 'pressure': 29.4, 'windSpeed':
>>>> 0.0, 'inHumidity': 53.0, 'inTemp': 64.94, 'windGust': 0.0, 'rainRate':
>>>> 0.0,
>>>> 'usUnits': 1, 'extraTemp1': 64.94}
>>>>
>>>>
>>>> any advise on what settings I have missed?
>>>>
>>>> Thanks Simon
>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/weewx-user/fe6501a2-7e8c-412f-b461-168c81ac27beo%40googlegroups.com
>>>>
>>>> <https://groups.google.com/d/msgid/weewx-user/fe6501a2-7e8c-412f-b461-168c81ac27beo%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected] <javascript:>.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/a1e378bc-53dd-450e-b0a7-7eb7cee27ea5o%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/a1e378bc-53dd-450e-b0a7-7eb7cee27ea5o%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/5e97062c-9e14-441e-8a1f-396447887c60o%40googlegroups.com.
