Ok, now that Ive finished configuration, how to I get weewx-wd to send the testtags file to my website?
On Wednesday, August 19, 2020 at 9:41:09 PM UTC-4, gjr80 wrote: > > That is good to hear. > > Gary > > On Thursday, 20 August 2020 11:20:20 UTC+10, Luke Marcum wrote: >> >> Thanks so much! Just tried it out and it worked! >> >> On Wednesday, August 19, 2020 at 9:15:45 PM UTC-4, Luke Marcum wrote: >>> >>> Its fine! >>> >>> On Wednesday, August 19, 2020 at 7:35:56 PM UTC-4, gjr80 wrote: >>>> >>>> Have published the WeeWX-WD >>>> <https://github.com/gjr80/weewx-weewx-wd/tree/master> v2.0.0 release >>>> just now. Download and installation should work as per the readme. My >>>> apologies for the delay. >>>> >>>> Gary >>>> >>>> On Tuesday, 18 August 2020 22:41:09 UTC+10, gjr80 wrote: >>>>> >>>>> Rich, thanks, indeed I did not publish a 2.0.0 release package and >>>>> hence the 404 error. >>>>> >>>>> Luke. As Rich points out you can download a zip of the repo and that >>>>> will install, my concern is whether there are any outstanding issues with >>>>> 2.0.0. From memory I had them all sorted and then other things took me >>>>> away >>>>> from publishing the release. Give me day to have a look over 2.0.0 and >>>>> publish the release. >>>>> >>>>> Gary >>>>> >>>>> On Tuesday, 18 August 2020 21:22:09 UTC+10, rich T wrote: >>>>>> >>>>>> Gary >>>>>> >>>>>> Believe this is the issue that Luke is having: >>>>>> >>>>>> pi@raspberrypi:~ $ wget -P /var/tmp >>>>>> https://github.com/gjr80/weewx-weewx-wd/releases/download/v2.0.0/weewxwd-2.0.0.tar.gz >>>>>> --2020-08-18 07:17:01-- >>>>>> https://github.com/gjr80/weewx-weewx-wd/releases/download/v2.0.0/weewxwd-2.0.0.tar.gz >>>>>> Resolving github.com (github.com)... 140.82.112.4 >>>>>> Connecting to github.com (github.com)|140.82.112.4|:443... connected. >>>>>> HTTP request sent, awaiting response... 404 Not Found >>>>>> 2020-08-18 07:17:02 ERROR 404: Not Found. >>>>>> >>>>>> Now if you go to https://github.com/gjr80/weewx-weewx-wd, cloning or >>>>>> downloading the zip file seems to work. >>>>>> >>>>>> Rich >>>>>> >>>>>> On Sunday, August 16, 2020 at 6:26:16 PM UTC-4, Luke Marcum wrote: >>>>>>> >>>>>>> Im trying to set up weewx to obtain data from my gw1000, running on >>>>>>> my pi4. Im using these instructions to set it up: >>>>>>> https://github.com/weewx/weewx/wiki/gw1000-recipe and I've made it >>>>>>> to the part where I have to update the interceptor settings in >>>>>>> weewx.conf >>>>>>> but I can't seem to find where this part of the settings is. I have >>>>>>> been >>>>>>> able to run interceptor.py from the interceptor download and it gets my >>>>>>> current weather data, but I can't seem to connect it to weewx. HELP!!! >>>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/c7b6189d-ce60-4d71-a203-25bf9c97e776o%40googlegroups.com.
