Vince... THANK YOU! That's what I was missing. I'm not using Tempest hardware. I'm an original crowd support member - so I have the museum hardware.
It appears to be UP and running with my data NOW ...(Link to my page) <http://www.mpython.com/KM4VIG/weewx/> * Thanks AGAIN!* On Saturday, September 5, 2020 at 12:43:22 PM UTC-4 vince wrote: > On Saturday, September 5, 2020 at 8:54:21 AM UTC-7, Tom Cichowicz wrote: >> >> Yeah ... it still set for simulator -- > > > You installed the driver, which is part one. Good. > > You next need to configure your weewx.conf to know your sensor mappings. > This requires you to know your station's IDs (presumably a Tempest ?). > An example is in the driver github page at > https://github.com/captain-coredump/weatherflow-udp (substitute in your > sensor ID numbers) > > Then you need to reconfigure weewx to 'use' the Weatherflow driver. See > http://www.weewx.com/docs/utilities.htm#wee_config_utility and the > --reconfigure option for that. > > Then you'll be done. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/91ef6e16-c081-4cb9-8221-c054f049fe26n%40googlegroups.com.
