I have been using weewx 4.1.1 on a RPi since April using ecowitt-client from a HP2551 with no problems at all, but have recently added a lightning detector (wh57), pm2.5 detector (wh41) and a DP1500 (GW1000) gateway to my set up.
I changed over to using the GW1000 API (installed by*wee_extension* utility on a weewx package install) which appears to be working fine - data received with no problem, and after searching here managed to get the 'Radiation' graph working, but still have not found any answer on how to get the pm2.5 and lightning graphs showing. Battery status for wh57 and wh41 show up on weather station screen under sensor status so I assume it must be a simple task to get the graphs showing. GW1000 'test-driver' shows the following: 2020-09-22 10:22:27 BST (1600766547): UV: 1, dateTime: 1600766547, dayRain: 0.0, daymaxwind: 4.6, inHumidity: 58, inTemp: 21.9, lightning_distance: 1, lightning_last_det_time: 1600584975, lightning_strike_count: None, luminosity: 22630.0, monthRain: 0.7, outHumidity: 87, outTemp: 17.6, pm2_5: 15.0, pm2_51_24hav: 9.7, pressure: 1007.8, rain: None, rainRate: 0.0, relbarometer: 1011.8, stormRain: 0.0, usUnits: 17, uvradiation: 27.9, weekRain: 0.0, wh41_ch1_batt: 6, wh57_batt: 5, wh65_batt: 0, windDir: 258, windGust: 2.0, windSpeed: 1.3, yearRain: 258.9 Any assistance much appreciated - VMT. Andy -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/febf6837-86b9-4a66-ae8b-5bf94d7de2a3n%40googlegroups.com.
