Hi Andy,
I have PM2.5 from my WH41 graphing in my Belchertown skin, you can see
that on the bottom left of this page...
http://metoffice.skybase.net/weewx/belchertown
I put
[[chart7]]
title = PM 2.5
[[[pm2_5]]]
name = PM 2.5
zIndex = 1
color = "#ffc83f"
y_label = "ug/m3"
in/etc/weewx/skins/Belchertown/graphs.conf
I have a lightning graph too but since there hasn't been any lightning
there has been nothing to test the graphing. I've been tempted to build
a spark gap and create my own "lightning" to work things out.
I've yet to create the graphs for batteries etc. I'll work on that soon
since I 4 soil moisture sensors too.
regards
Tim
On 22/9/20 7:26 pm, Big OB wrote:
I have been using weewx 4.1.1 on a RPi since April using
ecowitt-client from a HP2551 with no problems at all, but have
recently added a lightning detector (wh57), pm2.5 detector (wh41) and
a DP1500 (GW1000) gateway to my set up.
I changed over to using the GW1000 API (installed
by/wee_extension/ utility on a weewx package install) which appears to
be working fine - data received with no problem, and after searching
here managed to get the 'Radiation' graph working, but still have not
found any answer on how to get the pm2.5 and lightning graphs showing.
Battery status for wh57 and wh41 show up on weather station screen
under sensor status so I assume it must be a simple task to get the
graphs showing.
GW1000 'test-driver' shows the following:
2020-09-22 10:22:27 BST (1600766547): UV: 1, dateTime: 1600766547,
dayRain: 0.0, daymaxwind: 4.6, inHumidity: 58, inTemp: 21.9,
lightning_distance: 1, lightning_last_det_time: 1600584975,
lightning_strike_count: None, luminosity: 22630.0, monthRain: 0.7,
outHumidity: 87, outTemp: 17.6, pm2_5: 15.0, pm2_51_24hav: 9.7,
pressure: 1007.8, rain: None, rainRate: 0.0, relbarometer: 1011.8,
stormRain: 0.0, usUnits: 17, uvradiation: 27.9, weekRain: 0.0,
wh41_ch1_batt: 6, wh57_batt: 5, wh65_batt: 0, windDir: 258, windGust:
2.0, windSpeed: 1.3, yearRain: 258.9
Any assistance much appreciated - VMT.
Andy
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/5635dfd3-4537-9015-e5f8-f6cd0a93406c%40skybase.net.
