I have the same setup. I did not add anything to weewx.conf. All I did was tell the envoy what ID 2 was in the envoy setup. Once I set ID 2 to anemometer the wind data showed up. My assumption is once the envoy knows that ID2 is wind it sends the appropriate data via the logger. Tom is right you can only have one ISS but can have three other devices connected you just have to identify what each device ID is.
Tom > On Nov 2, 2020, at 4:04 PM, Tom Keffer <[email protected]> wrote: > > It is my understanding that a console (or Envoy) can have max one ISS, or one > anemometer. That is a Davis hardware limitation. > > Give them a call to be sure. > > On Mon, Nov 2, 2020 at 1:49 PM orangegecko <[email protected] > <mailto:[email protected]>> wrote: > > Hi, I am running weewx on a rpi and was wondering if there is a way to have > my wind sensor data show up on the weewx weather page. the anemometer is on > its own wireless transmitter (id 2) and is currently showing 0 for all data. > > the rpi is connected to a wireless weather envoy and usb data logger > (davis)... my console (in a different location) shows all the sensors data > on its screen so i know its transmitting. > > is there a way to just add the id to the weewx.conf? or do i have to do > something else? > > Here is how its currently set in weewx.conf > > # The id of your ISS station (usually 1). If you use a wind meter connected > # to a anemometer transmitter kit, use its id > iss_id = 1 > > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/93e64da0-b7e8-4657-b04e-cac791b26a9an%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/93e64da0-b7e8-4657-b04e-cac791b26a9an%40googlegroups.com?utm_medium=email&utm_source=footer>. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/CAPq0zEDbh0_FMUP29%3DcX-vgB7aLKGSZ5W1FNZ%3DXnoghpyC_Rhg%40mail.gmail.com > > <https://groups.google.com/d/msgid/weewx-user/CAPq0zEDbh0_FMUP29%3DcX-vgB7aLKGSZ5W1FNZ%3DXnoghpyC_Rhg%40mail.gmail.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/58ADF8C1-2860-4C6E-B769-6000B6F01B04%40gmail.com.
