Thanks for pointing me in the right direction! I got it working. this site was helpful, http://www.weewx.com/docs/hardware.htm#vantage_notes
if anyone was wondering, i added 'wee_device --set-transmitter-type=2,4' On Monday, November 2, 2020 at 5:53:46 PM UTC-5 [email protected] wrote: > I have the same setup. I did not add anything to weewx.conf. All I did > was tell the envoy what ID 2 was in the envoy setup. Once I set ID 2 to > anemometer the wind data showed up. My assumption is once the envoy knows > that ID2 is wind it sends the appropriate data via the logger. Tom is > right you can only have one ISS but can have three other devices connected > you just have to identify what each device ID is. > > Tom > > On Nov 2, 2020, at 4:04 PM, Tom Keffer <[email protected]> wrote: > > It is my understanding that a console (or Envoy) can have max one ISS, or > one anemometer. That is a Davis hardware limitation. > > Give them a call to be sure. > > On Mon, Nov 2, 2020 at 1:49 PM orangegecko <[email protected]> wrote: > >> >> Hi, I am running weewx on a rpi and was wondering if there is a way to >> have my wind sensor data show up on the weewx weather page. the anemometer >> is on its own wireless transmitter (id 2) and is currently showing 0 for >> all data. >> >> the rpi is connected to a wireless weather envoy and usb data logger >> (davis)... my console (in a different location) shows all the sensors data >> on its screen so i know its transmitting. >> >> is there a way to just add the id to the weewx.conf? or do i have to do >> something else? >> >> Here is how its currently set in weewx.conf >> >> # The id of your ISS station (usually 1). If you use a wind meter >> connected >> # to a anemometer transmitter kit, use its id >> iss_id = 1 >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/93e64da0-b7e8-4657-b04e-cac791b26a9an%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/93e64da0-b7e8-4657-b04e-cac791b26a9an%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/CAPq0zEDbh0_FMUP29%3DcX-vgB7aLKGSZ5W1FNZ%3DXnoghpyC_Rhg%40mail.gmail.com > > <https://groups.google.com/d/msgid/weewx-user/CAPq0zEDbh0_FMUP29%3DcX-vgB7aLKGSZ5W1FNZ%3DXnoghpyC_Rhg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/cd0b98ae-9c1d-4b1f-ab58-29e3af5b3ca6n%40googlegroups.com.
