Well, I ran into a problem.....
I installed weewx 4.2.0 by yum:
rpm --import http://weewx.com/keys.html
curl -s http://weewx.com/yum/weewx-el7.repo | sudo tee
/etc/yum.repos.d/weewx.repo
yum install weewx
cd /etc/weewx
wee_config --config=weewx.conf
Using configuration file weewx.conf
Internal logic error in config.py
I manually edited the weewx.conf file and added a section [Ultimeter] with
the following I found on the web:
[Station]
location = "Fremont Comm Site, Salida CO"
latitude = 38.446630
longitude = -106.010750
altitude = 11000, foot
station_type = Simulator
station_url = http://www.cmrg.org
rain_year_start = 1
week_start = 6
[Ultimeter]
# Connection type: serial or ethernet
type = serial
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/serial-0
# If the connection type is ethernet, an IP Address/hostname is
required:
#host = wlip.ka0wuc.org
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 2400
# TCP port (when using the WeatherLinkIP)
#tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
#tcp_send_delay = 0.5
# The id of your ISS station (usually 1). If you use a wind meter
connected
# to a anemometer transmitter kit, use its id
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 30
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 50
#model_type = 2
# The driver to use:
driver = weewx.drivers.ultimeter
Then I ran the wee_config:
cd /etc/weewx
wee_config --reconfigure --config=weewx.conf
Using configuration file weewx.conf
Enter a brief description of the station, such as its location. For
example:
Santa's Workshop, North Pole
description [Fremont Comm Site, Salida CO]:
Specify altitude, with units 'foot' or 'meter'. For example:
35, foot
12, meter
altitude [11000, foot]:
Specify latitude in decimal degrees, negative for south.
latitude [38.446630]:
Specify longitude in decimal degrees, negative for west.
longitude [-106.010750]:
You can register your station on weewx.com, where it will be included
in a map. You will need a unique URL to identify your station (such as a
website, or WeatherUnderground link).
Include station in the station registry (y/n)? [n]:
Indicate the preferred units for display: ['us', 'metric']
units [us]:
Installed drivers include:
0) ? (weewx.drivers.acurite) No module named usb
1) ? (weewx.drivers.cc3000) No module named serial
2) ? (weewx.drivers.fousb) No module named usb
3) Simulator (weewx.drivers.simulator)
4) ? (weewx.drivers.te923) No module named usb
5) ? (weewx.drivers.ultimeter) No module named serial
6) Vantage (weewx.drivers.vantage)
7) ? (weewx.drivers.wmr100) No module named usb
8) ? (weewx.drivers.wmr200) No module named usb
9) ? (weewx.drivers.wmr300) No module named usb
10) ? (weewx.drivers.wmr9x8) No module named serial
11) WS1 (weewx.drivers.ws1)
12) WS23xx (weewx.drivers.ws23xx)
13) ? (weewx.drivers.ws28xx) No module named usb
choose a driver [3]: 5
Traceback (most recent call last):
File "/usr/share/weewx/wee_config", line 123, in <module>
main()
File "/usr/share/weewx/wee_config", line 117, in main
config_mgr.run(args, options)
File "/usr/share/weewx/weecfg/config.py", line 114, in run
stn_info = self.get_stn_info(config_dict, options)
File "/usr/share/weewx/weecfg/config.py", line 155, in get_stn_info
stn_info.update(weecfg.prompt_for_driver_settings(driver, config_dict))
File "/usr/share/weewx/weecfg/__init__.py", line 1685, in
prompt_for_driver_settings
__import__(driver)
File "/usr/share/weewx/weewx/drivers/ultimeter.py", line 59, in <module>
import serial
ImportError: No module named serial
So, at this point I'm stuck.
Any suggestions?
thanks
rich
On Fri, Nov 20, 2020 at 5:57 AM Tom Keffer <[email protected]> wrote:
> It's easiest just to use the utility wee_config with the --reconfigure
> <http://www.weewx.com/docs/utilities.htm#Action_--reconfigure> option. It
> will prompt you for any needed options:
>
> *wee_config --reconfigure*
>
>
>
> On Thu, Nov 19, 2020 at 6:35 PM Rich Painter <[email protected]>
> wrote:
>
>> I just freshly installed CentOS 7.9 64-bit and weewx 4.2.0
>>
>> I have a Peet Ultimeter 800.
>>
>> How do I create a configuration file for this station?
>>
>> Alternative, what other "station_type" could be used to make the Peet
>> work?
>>
>> thanks
>> rich
>>
>>
>> --
>> Richard A. Painter, P.E. Retired
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/CABh4ZQiHHndO0HuxO_2MsM%3D7aBYsu7OYKZqPmteQHMEzhDN0gA%40mail.gmail.com
>> <https://groups.google.com/d/msgid/weewx-user/CABh4ZQiHHndO0HuxO_2MsM%3D7aBYsu7OYKZqPmteQHMEzhDN0gA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/CAPq0zEBQfO5xATFONwB%2BBPi7UB-PSDEihXu0wUzjAZ2dew4ajQ%40mail.gmail.com
> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEBQfO5xATFONwB%2BBPi7UB-PSDEihXu0wUzjAZ2dew4ajQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
--
Richard A. Painter, P.E. Retired
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CABh4ZQh%3DPWkuqicoGk2vJyiEkME6gWtcH_vO9onXgZ8mpoQERg%40mail.gmail.com.
