Below a copy of the sensor_map.
I can see 3 seconds update in the Tempest website but not sure if its
related with the "Tempest app setup", I have to double check that since I'm
not sure where that setting is (I'm new to WeatherFlow).
If I enabled rapid fire in WeeWx, I see WU getting the RapidFire interval
but with the missing Gust value.
[[sensor_map]]
outTemp = air_temperature.ST-00023052.obs_st
outHumidity = relative_humidity.ST-00023052.obs_st
pressure = station_pressure.ST-00023052.obs_st
#lightning_strikes = lightning_strike_count.ST-00000025.obs_st
#avg_distance = lightning_strike_avg_distance.ST-00000025.obs_st
outTempBatteryStatus = battery.ST-00023052.obs_st
windSpeed = wind_speed.ST-00023052.rapid_wind
windDir = wind_direction.ST-00023052.rapid_wind
#luxXXX = illuminance.ST-00000025.obs_st
UV = uv.ST-00023052.obs_st
rain = rain_accumulated.ST-00023052.obs_st
windBatteryStatus = battery.ST-00023052.obs_st
radiation = solar_radiation.ST-00023052.obs_st
#lightningXXX = distance.ST-00000025.evt_strike
#lightningYYY = energy.ST-00000025.evt_strike
On Tuesday, December 1, 2020 at 11:35:27 PM UTC-5 vince wrote:
> What does your weewx.conf stanza sensor_map for the driver look like, and
> do you actually have rapid_wind enabled for your station via the Tempest
> app setup ?
>
> I guess I'm wondering if you're using the obs_st mapping of wind (which is
> once/minute) and not the rapid_wind mapping of wind (which is once every 3
> secs 'if' enabled in the Tempest app), but that's just a guess. You need
> to provide more info into your configuration.
>
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/90e7b6d9-29bd-4ce6-ab93-f55b1ce3978en%40googlegroups.com.
