Can you provide the console output from when you installed pypcap? Under some circumstances pip installs locally in a directory that is not in the path when python is run. If you can't uninstall using:
$ sudo pip3 uninstall pypcap and then install again and capture and post the console output. Gary On Sunday, 13 December 2020 at 12:04:38 UTC+10 [email protected] wrote: > Done, same error. > On 12/12/20 5:56 PM, gjr80 wrote: > > I believe that installing via apt makes pcap available under python2 only. > Try installing pypcap using pip3: > > $ sudo pip3 install pypcap > > Note that you may need ot install pip3 if not already installed: > > $ sudo apt-get install python3-pip > > Gary > > On Sunday, 13 December 2020 at 11:38:58 UTC+10 [email protected] > wrote: > >> Ok, got a little further. >> >> Dec 12 17:04:24 raspberrypi weewx[18797] INFO __main__: Using Python >> 3.7.3 (default, Jul 25 2020, 13:03:44) #012[GCC 8.3.0] >> >> root@raspberrypi:/home/pi# PYTHONPATH=/usr/share/weewx python3.7 >> /usr/share/weewx/user/interceptor.py --device=acurite-bridge --mode=sniff >> --iface=wlan0 --filter="src 10.3.141.99 and dst port 80" >> >> >> Traceback (most recent call last): >> >> File "/usr/share/weewx/user/interceptor.py", line 2664, in <module> >> address=options.addr, port=options.port) >> File "/usr/share/weewx/user/interceptor.py", line 1002, in __init__ >> AcuriteBridge.Parser(), handler=AcuriteBridge.Handler, **stn_dict) >> File "/usr/share/weewx/user/interceptor.py", line 427, in __init__ >> iface, pcap_filter, promiscuous) >> File "/usr/share/weewx/user/interceptor.py", line 465, in __init__ >> import pcap >> ModuleNotFoundError: No module named 'pcap' >> >> @@@@@I have this installed, but I guess it is not finding it:@@@@@@ >> >> root@raspberrypi:/home/pi# sudo apt-get install python-libpcap >> Reading package lists... Done >> Building dependency tree >> Reading state information... Done >> python-libpcap is already the newest version (0.6.4-1). >> The following packages were automatically installed and are no longer >> required: >> lxplug-volume openbsd-inetd tcpd >> Use 'sudo apt autoremove' to remove them. >> 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. >> >> Thanks, >> >> Chris KQ6UP >> >> >> On 12/12/20 4:43 PM, gjr80 wrote: >> >> When you start WeeWX after your upgrade what version of python is it run >> under? python 2 or python 3? You will find this in the startup portion of >> the log when starting WeeWX. Assuming you installed the dependencies for >> this version of python you will need to specify the version of python used >> when running the interceptor directly. If WeeWX is being run under python2 >> replace *python* in the above command with *python2*, if WeeWX is being >> run under python3 replace *python* in the above command with *python3*. >> >> Gary >> >> On Sunday, 13 December 2020 at 09:38:29 UTC+10 [email protected] >> wrote: >> >>> It got one line further, lol: >>> >>> root@raspberrypi:/usr/share/weewx# PYTHONPATH=/usr/share/weewx python >>> /usr/share/weewx/user/interceptor.py --device=acurite-bridge --mode=sniff >>> --iface=wlan0 --filter="src 10.3.141.99 and dst port 80" >>> >>> >>> Traceback (most recent call last): >>> >>> File "/usr/share/weewx/user/interceptor.py", line 303, in <module> >>> import weeutil.weeutil >>> File "/usr/share/weewx/weeutil/weeutil.py", line 26, in <module> >>> from weeutil.config import accumulateLeaves, search_up >>> File "/usr/share/weewx/weeutil/config.py", line 11, in <module> >>> import configobj >>> ImportError: No module named configobj >>> On 12/12/20 3:34 PM, gjr80 wrote: >>> >>> try >>> >>> $ PYTHONPATH=/usr/share/weewx python >>> /usr/share/weewx/user/interceptor.py ..... >>> >>> Gary >>> >>> On Sunday, 13 December 2020 at 09:23:56 UTC+10 [email protected] >>> wrote: >>> >>>> There is no "bin" directory in /home/weewx or /usr/share/weewx. I >>>> don't have a /home/weewx directory, but I do /usr/share/weewx directory. >>>> >>>> I have "tree'd" the weewx folder. >>>> >>>> weewx/ >>>> ├── daemon.py >>>> ├── __pycache__ >>>> │ ├── daemon.cpython-37.pyc >>>> │ └── six.cpython-37.pyc >>>> ├── schemas >>>> │ ├── __init__.py >>>> │ ├── __pycache__ >>>> │ │ ├── __init__.cpython-37.pyc >>>> │ │ └── wview_extended.cpython-37.pyc >>>> │ ├── wview_extended.py >>>> │ └── wview.py >>>> ├── six.py >>>> ├── user >>>> │ ├── extensions.py >>>> │ ├── __init__.py >>>> │ ├── installer >>>> │ │ └── interceptor >>>> │ │ └── install.py >>>> │ ├── interceptor.py >>>> │ └── __pycache__ >>>> │ ├── extensions.cpython-37.pyc >>>> │ ├── __init__.cpython-37.pyc >>>> │ └── interceptor.cpython-37.pyc >>>> ├── weecfg >>>> │ ├── config.py >>>> │ ├── database.py >>>> │ ├── extension.py >>>> │ ├── __init__.py >>>> │ └── __pycache__ >>>> │ ├── config.cpython-37.pyc >>>> │ ├── extension.cpython-37.pyc >>>> │ └── __init__.cpython-37.pyc >>>> ├── wee_config >>>> ├── wee_database >>>> ├── weedb >>>> │ ├── __init__.py >>>> │ ├── mysql.py >>>> │ ├── __pycache__ >>>> │ │ ├── __init__.cpython-37.pyc >>>> │ │ └── sqlite.cpython-37.pyc >>>> │ └── sqlite.py >>>> ├── wee_debug >>>> ├── wee_device >>>> ├── wee_extension >>>> ├── wee_import >>>> ├── weeimport >>>> │ ├── csvimport.py >>>> │ ├── cumulusimport.py >>>> │ ├── __init__.py >>>> │ ├── wdimport.py >>>> │ ├── weathercatimport.py >>>> │ ├── weeimport.py >>>> │ └── wuimport.py >>>> ├── weeplot >>>> │ ├── genplot.py >>>> │ ├── __init__.py >>>> │ ├── __pycache__ >>>> │ │ ├── genplot.cpython-37.pyc >>>> │ │ ├── __init__.cpython-37.pyc >>>> │ │ └── utilities.cpython-37.pyc >>>> │ └── utilities.py >>>> ├── wee_reports >>>> ├── weeutil >>>> │ ├── config.py >>>> │ ├── ftpupload.py >>>> │ ├── __init__.py >>>> │ ├── logger.py >>>> │ ├── log.py >>>> │ ├── Moon.py >>>> │ ├── __pycache__ >>>> │ │ ├── config.cpython-37.pyc >>>> │ │ ├── __init__.cpython-37.pyc >>>> │ │ ├── logger.cpython-37.pyc >>>> │ │ ├── Moon.cpython-37.pyc >>>> │ │ ├── Sun.cpython-37.pyc >>>> │ │ └── weeutil.cpython-37.pyc >>>> │ ├── rsyncupload.py >>>> │ ├── Sun.py >>>> │ ├── timediff.py >>>> │ └── weeutil.py >>>> ├── weewx >>>> │ ├── accum.py >>>> │ ├── almanac.py >>>> │ ├── cheetahgenerator.py >>>> │ ├── crc16.py >>>> │ ├── defaults.py >>>> │ ├── drivers >>>> │ │ ├── acurite.py >>>> │ │ ├── cc3000.py >>>> │ │ ├── fousb.py >>>> │ │ ├── __init__.py >>>> │ │ ├── __pycache__ >>>> │ │ │ ├── __init__.cpython-37.pyc >>>> │ │ │ └── simulator.cpython-37.pyc >>>> │ │ ├── simulator.py >>>> │ │ ├── te923.py >>>> │ │ ├── ultimeter.py >>>> │ │ ├── vantage.py >>>> │ │ ├── wmr100.py >>>> │ │ ├── wmr200.py >>>> │ │ ├── wmr300.py >>>> │ │ ├── wmr9x8.py >>>> │ │ ├── ws1.py >>>> │ │ ├── ws23xx.py >>>> │ │ └── ws28xx.py >>>> │ ├── engine.py >>>> │ ├── filegenerator.py >>>> │ ├── imagegenerator.py >>>> │ ├── __init__.py >>>> │ ├── manager.py >>>> │ ├── __pycache__ >>>> │ │ ├── accum.cpython-37.pyc >>>> │ │ ├── almanac.cpython-37.pyc >>>> │ │ ├── cheetahgenerator.cpython-37.pyc >>>> │ │ ├── defaults.cpython-37.pyc >>>> │ │ ├── engine.cpython-37.pyc >>>> │ │ ├── imagegenerator.cpython-37.pyc >>>> │ │ ├── __init__.cpython-37.pyc >>>> │ │ ├── manager.cpython-37.pyc >>>> │ │ ├── qc.cpython-37.pyc >>>> │ │ ├── reportengine.cpython-37.pyc >>>> │ │ ├── restx.cpython-37.pyc >>>> │ │ ├── station.cpython-37.pyc >>>> │ │ ├── tags.cpython-37.pyc >>>> │ │ ├── units.cpython-37.pyc >>>> │ │ ├── uwxutils.cpython-37.pyc >>>> │ │ ├── wxformulas.cpython-37.pyc >>>> │ │ ├── wxservices.cpython-37.pyc >>>> │ │ ├── wxxtypes.cpython-37.pyc >>>> │ │ └── xtypes.cpython-37.pyc >>>> │ ├── qc.py >>>> │ ├── reportengine.py >>>> │ ├── restx.py >>>> │ ├── station.py >>>> │ ├── tags.py >>>> │ ├── units.py >>>> │ ├── uwxutils.py >>>> │ ├── wxengine.py >>>> │ ├── wxformulas.py >>>> │ ├── wxmanager.py >>>> │ ├── wxservices.py >>>> │ ├── wxxtypes.py >>>> │ └── xtypes.py >>>> ├── weewxd >>>> └── wunderfixer >>>> On 12/12/20 2:48 PM, gjr80 wrote: >>>> >>>> Apologies, I have given you incomplete info. The command provided under >>>> the *How to run the driver directly* section requires you to be in the >>>> WeeWX root directory (nominally /home/weewx for a setup.py install or >>>> /usr/share/weewx for a package install). I thought that was stated in >>>> the readme but it seems it is not, it is only stated in the comments >>>> <https://github.com/matthewwall/weewx-interceptor/blob/master/bin/user/interceptor.py#L2568> >>>> >>>> in the actual driver file. >>>> >>>> Try cd'ing into /home/weewx or /usr/share/weewx (as applicable) and >>>> then execute the command. >>>> >>>> My preference when running WeeWX drivers directly is to specify the >>>> paths in full, eg: >>>> >>>> $ PYTHONPATH=/home/weewx/bin python /home/weewx/user/driver_file_name.py >>>> >>>> It's a little more typing, is more specific and requires you to know >>>> exactly where things are on your system but it has the advantage of being >>>> 'present working directory' agnostic. >>>> >>>> Gary >>>> >>>> On Sunday, 13 December 2020 at 02:01:33 UTC+10 [email protected] >>>> wrote: >>>> >>>>> When I try the whole command as root I get (note I will change the >>>>> flags after I get it to find the file): >>>>> >>>>> PYTHONPATH=bin python bin/user/interceptor.py --device=acurite-bridge >>>>> --mode=sniff --iface=eth0 --filter="src 192.168.0.4 and dst port 80" >>>>> python: can't open file 'bin/user/interceptor.py': [Errno 2] No such >>>>> file or directory >>>>> >>>>> That is why I executed the way I did. Maybe this is what is going >>>>> on. Not sure why this does not work. >>>>> >>>>> Thanks, >>>>> >>>>> Chris KQ6UP >>>>> On 12/11/20 8:29 PM, gjr80 wrote: >>>>> >>>>> Hi, >>>>> >>>>> Python needs to know where to find the WeeWX python files. If you have >>>>> a look through the interceptor readme >>>>> <https://github.com/matthewwall/weewx-interceptor> and scroll down to >>>>> the section titled *How to run the driver directly* it tells you what >>>>> you need to do. >>>>> >>>>> Gary >>>>> >>>>> On Saturday, 12 December 2020 at 14:01:25 UTC+10 Chris Maness wrote: >>>>> >>>>>> I had wee-wx interceptor running on version 3.8.2, but since >>>>>> upgrading >>>>>> to 4.2.0 and upgrading the weewx-interceptor, I cannot get it to >>>>>> work. >>>>>> When I run by hand to debug, I get the following error: >>>>>> >>>>>> /home/pi/weewx-interceptor-master/bin/user# python interceptor.py >>>>>> --device=ecowitt-client --mode=sniff --iface=wlan0 --filter="src >>>>>> 10.3.141.99 and dst port 80" >>>>>> >>>>>> Traceback (most recent call last): >>>>>> >>>>>> File "interceptor.py", line 302, in <module> >>>>>> >>>>>> import weewx.drivers >>>>>> >>>>>> ImportError: No module named weewx.drivers >>>>>> >>>>>> Any suggestions on how to fix this? >>>>>> >>>>>> Thanks, Chris KQ6UP >>>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/89cf1d35-dbdd-4fc2-b845-96a3834dd627n%40googlegroups.com >>>>> >>>>> <https://groups.google.com/d/msgid/weewx-user/89cf1d35-dbdd-4fc2-b845-96a3834dd627n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/19012ab2-4b5f-42d2-b85e-b2b952324fe0n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/19012ab2-4b5f-42d2-b85e-b2b952324fe0n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/66751660-e8af-4614-888e-1c616cf05150n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/66751660-e8af-4614-888e-1c616cf05150n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/9b398246-6866-46d5-b96b-eb82fe294185n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/9b398246-6866-46d5-b96b-eb82fe294185n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/14f28ca7-b305-4d90-a15c-9e2dd4a3b470n%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/14f28ca7-b305-4d90-a15c-9e2dd4a3b470n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/419a5e8a-65b5-4234-815f-12dcd2438b56n%40googlegroups.com.
