Thank you for your help, Chris KQ6UP
On 12/12/20 6:38 PM, gjr80 wrote:
I don't believe having an error code is a good sign. A bit of googling indicates that it could be a version issue with setuptools, but we have about reached the limit of my pip knowledge. Tom or some other pip expert might be able to help.GaryOn Sunday, 13 December 2020 at 12:29:38 UTC+10 [email protected] wrote:pip3 install pypcap Looking in indexes: https://pypi.org/simple <https://pypi.org/simple>, https://www.piwheels.org/simple <https://www.piwheels.org/simple> Collecting pypcap Downloading https://files.pythonhosted.org/packages/12/71/a689ca8c6ef4570e105efdc6b46d4ac16cdef7af36a8fbfaff0f6fa2b754/pypcap-1.2.3.tar.gz <https://files.pythonhosted.org/packages/12/71/a689ca8c6ef4570e105efdc6b46d4ac16cdef7af36a8fbfaff0f6fa2b754/pypcap-1.2.3.tar.gz> (136kB) 100% |████████████████████████████████| 143kB 1.4MB/s Complete output from command python setup.py egg_info: pcap.h not found ---------------------------------------- Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-install-yuo7efq5/pypcap/ On 12/12/20 6:25 PM, gjr80 wrote:Can you provide the console output from when you installed pypcap? Under some circumstances pip installs locally in a directory that is not in the path when python is run. If you can't uninstall using: $ sudo pip3 uninstall pypcap and then install again and capture and post the console output. Gary On Sunday, 13 December 2020 at 12:04:38 UTC+10 [email protected] wrote: Done, same error. On 12/12/20 5:56 PM, gjr80 wrote:I believe that installing via apt makes pcap available under python2 only. Try installing pypcap using pip3: $ sudo pip3 install pypcap Note that you may need ot install pip3 if not already installed: $ sudo apt-get install python3-pip Gary On Sunday, 13 December 2020 at 11:38:58 UTC+10 [email protected] wrote: Ok, got a little further. Dec 12 17:04:24 raspberrypi weewx[18797] INFO __main__: Using Python 3.7.3 (default, Jul 25 2020, 13:03:44) #012[GCC 8.3.0] root@raspberrypi:/home/pi# PYTHONPATH=/usr/share/weewx python3.7 /usr/share/weewx/user/interceptor.py --device=acurite-bridge --mode=sniff --iface=wlan0 --filter="src 10.3.141.99 and dst port 80" Traceback (most recent call last): File "/usr/share/weewx/user/interceptor.py", line 2664, in <module> address=options.addr, port=options.port) File "/usr/share/weewx/user/interceptor.py", line 1002, in __init__ AcuriteBridge.Parser(), handler=AcuriteBridge.Handler, **stn_dict) File "/usr/share/weewx/user/interceptor.py", line 427, in __init__ iface, pcap_filter, promiscuous) File "/usr/share/weewx/user/interceptor.py", line 465, in __init__ import pcap ModuleNotFoundError: No module named 'pcap' @@@@@I have this installed, but I guess it is not finding it:@@@@@@ root@raspberrypi:/home/pi# sudo apt-get install python-libpcap Reading package lists... Done Building dependency tree Reading state information... Done python-libpcap is already the newest version (0.6.4-1). The following packages were automatically installed and are no longer required: lxplug-volume openbsd-inetd tcpd Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Thanks, Chris KQ6UP On 12/12/20 4:43 PM, gjr80 wrote:When you start WeeWX after your upgrade what version of python is it run under? python 2 or python 3? You will find this in the startup portion of the log when starting WeeWX. Assuming you installed the dependencies for this version of python you will need to specify the version of python used when running the interceptor directly. If WeeWX is being run under python2 replace /python/ in the above command with /python2/, if WeeWX is being run under python3 replace /python/ in the above command with /python3/. Gary On Sunday, 13 December 2020 at 09:38:29 UTC+10 [email protected] wrote: It got one line further, lol: root@raspberrypi:/usr/share/weewx# PYTHONPATH=/usr/share/weewx python /usr/share/weewx/user/interceptor.py --device=acurite-bridge --mode=sniff --iface=wlan0 --filter="src 10.3.141.99 and dst port 80" Traceback (most recent call last): File "/usr/share/weewx/user/interceptor.py", line 303, in <module> import weeutil.weeutil File "/usr/share/weewx/weeutil/weeutil.py", line 26, in <module> from weeutil.config import accumulateLeaves, search_up File "/usr/share/weewx/weeutil/config.py", line 11, in <module> import configobj ImportError: No module named configobj On 12/12/20 3:34 PM, gjr80 wrote:try $ PYTHONPATH=/usr/share/weewx python /usr/share/weewx/user/interceptor.py ..... Gary On Sunday, 13 December 2020 at 09:23:56 UTC+10 [email protected] wrote: There is no "bin" directory in /home/weewx or /usr/share/weewx. I don't have a /home/weewx directory, but I do /usr/share/weewx directory. I have "tree'd" the weewx folder. weewx/ ├── daemon.py ├── __pycache__ │ ├── daemon.cpython-37.pyc │ └── six.cpython-37.pyc ├── schemas │ ├── __init__.py │ ├── __pycache__ │ │ ├── __init__.cpython-37.pyc │ │ └── wview_extended.cpython-37.pyc │ ├── wview_extended.py │ └── wview.py ├── six.py ├── user │ ├── extensions.py │ ├── __init__.py │ ├── installer │ │ └── interceptor │ │ └── install.py │ ├── interceptor.py │ └── __pycache__ │ ├── extensions.cpython-37.pyc │ ├── __init__.cpython-37.pyc │ └── interceptor.cpython-37.pyc ├── weecfg │ ├── config.py │ ├── database.py │ ├── extension.py │ ├── __init__.py │ └── __pycache__ │ ├── config.cpython-37.pyc │ ├── extension.cpython-37.pyc │ └── __init__.cpython-37.pyc ├── wee_config ├── wee_database ├── weedb │ ├── __init__.py │ ├── mysql.py │ ├── __pycache__ │ │ ├── __init__.cpython-37.pyc │ │ └── sqlite.cpython-37.pyc │ └── sqlite.py ├── wee_debug ├── wee_device ├── wee_extension ├── wee_import ├── weeimport │ ├── csvimport.py │ ├── cumulusimport.py │ ├── __init__.py │ ├── wdimport.py │ ├── weathercatimport.py │ ├── weeimport.py │ └── wuimport.py ├── weeplot │ ├── genplot.py │ ├── __init__.py │ ├── __pycache__ │ │ ├── genplot.cpython-37.pyc │ │ ├── __init__.cpython-37.pyc │ │ └── utilities.cpython-37.pyc │ └── utilities.py ├── wee_reports ├── weeutil │ ├── config.py │ ├── ftpupload.py │ ├── __init__.py │ ├── logger.py │ ├── log.py │ ├── Moon.py │ ├── __pycache__ │ │ ├── config.cpython-37.pyc │ │ ├── __init__.cpython-37.pyc │ │ ├── logger.cpython-37.pyc │ │ ├── Moon.cpython-37.pyc │ │ ├── Sun.cpython-37.pyc │ │ └── weeutil.cpython-37.pyc │ ├── rsyncupload.py │ ├── Sun.py │ ├── timediff.py │ └── weeutil.py ├── weewx │ ├── accum.py │ ├── almanac.py │ ├── cheetahgenerator.py │ ├── crc16.py │ ├── defaults.py │ ├── drivers │ │ ├── acurite.py │ │ ├── cc3000.py │ │ ├── fousb.py │ │ ├── __init__.py │ │ ├── __pycache__ │ │ │ ├── __init__.cpython-37.pyc │ │ │ └── simulator.cpython-37.pyc │ │ ├── simulator.py │ │ ├── te923.py │ │ ├── ultimeter.py │ │ ├── vantage.py │ │ ├── wmr100.py │ │ ├── wmr200.py │ │ ├── wmr300.py │ │ ├── wmr9x8.py │ │ ├── ws1.py │ │ ├── ws23xx.py │ │ └── ws28xx.py │ ├── engine.py │ ├── filegenerator.py │ ├── imagegenerator.py │ ├── __init__.py │ ├── manager.py │ ├── __pycache__ │ │ ├── accum.cpython-37.pyc │ │ ├── almanac.cpython-37.pyc │ │ ├── cheetahgenerator.cpython-37.pyc │ │ ├── defaults.cpython-37.pyc │ │ ├── engine.cpython-37.pyc │ │ ├── imagegenerator.cpython-37.pyc │ │ ├── __init__.cpython-37.pyc │ │ ├── manager.cpython-37.pyc │ │ ├── qc.cpython-37.pyc │ │ ├── reportengine.cpython-37.pyc │ │ ├── restx.cpython-37.pyc │ │ ├── station.cpython-37.pyc │ │ ├── tags.cpython-37.pyc │ │ ├── units.cpython-37.pyc │ │ ├── uwxutils.cpython-37.pyc │ │ ├── wxformulas.cpython-37.pyc │ │ ├── wxservices.cpython-37.pyc │ │ ├── wxxtypes.cpython-37.pyc │ │ └── xtypes.cpython-37.pyc │ ├── qc.py │ ├── reportengine.py │ ├── restx.py │ ├── station.py │ ├── tags.py │ ├── units.py │ ├── uwxutils.py │ ├── wxengine.py │ ├── wxformulas.py │ ├── wxmanager.py │ ├── wxservices.py │ ├── wxxtypes.py │ └── xtypes.py ├── weewxd └── wunderfixer On 12/12/20 2:48 PM, gjr80 wrote:Apologies, I have given you incomplete info. The command provided under the /How to run the driver directly/ section requires you to be in the WeeWX root directory (nominally /home/weewx for a setup.py install or /usr/share/weewx for a package install). I thought that was stated in the readme but it seems it is not, it is only stated in the comments <https://github.com/matthewwall/weewx-interceptor/blob/master/bin/user/interceptor.py#L2568> in the actual driver file. Try cd'ing into /home/weewx or /usr/share/weewx (as applicable) and then execute the command. My preference when running WeeWX drivers directly is to specify the paths in full, eg: $ PYTHONPATH=/home/weewx/bin python /home/weewx/user/driver_file_name.py It's a little more typing, is more specific and requires you to know exactly where things are on your system but it has the advantage of being 'present working directory' agnostic. Gary On Sunday, 13 December 2020 at 02:01:33 UTC+10 [email protected] wrote: When I try the whole command as root I get (note I will change the flags after I get it to find the file): PYTHONPATH=bin python bin/user/interceptor.py --device=acurite-bridge --mode=sniff --iface=eth0 --filter="src 192.168.0.4 and dst port 80" python: can't open file 'bin/user/interceptor.py': [Errno 2] No such file or directory That is why I executed the way I did. Maybe this is what is going on. Not sure why this does not work. Thanks, Chris KQ6UP On 12/11/20 8:29 PM, gjr80 wrote:Hi, Python needs to know where to find the WeeWX python files. If you have a look through the interceptor readme <https://github.com/matthewwall/weewx-interceptor> and scroll down to the section titled /How to run the driver directly/ it tells you what you need to do. Gary On Saturday, 12 December 2020 at 14:01:25 UTC+10 Chris Maness wrote: I had wee-wx interceptor running on version 3.8.2, but since upgrading to 4.2.0 and upgrading the weewx-interceptor, I cannot get it to work. When I run by hand to debug, I get the following error: /home/pi/weewx-interceptor-master/bin/user# python interceptor.py --device=ecowitt-client --mode=sniff --iface=wlan0 --filter="src 10.3.141.99 and dst port 80" Traceback (most recent call last): File "interceptor.py", line 302, in <module> import weewx.drivers ImportError: No module named weewx.drivers Any suggestions on how to fix this? Thanks, Chris KQ6UP-- You received this message because youare subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/89cf1d35-dbdd-4fc2-b845-96a3834dd627n%40googlegroups.com <https://groups.google.com/d/msgid/weewx-user/89cf1d35-dbdd-4fc2-b845-96a3834dd627n%40googlegroups.com?utm_medium=email&utm_source=footer>.-- You received this message because you aresubscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/19012ab2-4b5f-42d2-b85e-b2b952324fe0n%40googlegroups.com <https://groups.google.com/d/msgid/weewx-user/19012ab2-4b5f-42d2-b85e-b2b952324fe0n%40googlegroups.com?utm_medium=email&utm_source=footer>.-- You received this message because you aresubscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/66751660-e8af-4614-888e-1c616cf05150n%40googlegroups.com <https://groups.google.com/d/msgid/weewx-user/66751660-e8af-4614-888e-1c616cf05150n%40googlegroups.com?utm_medium=email&utm_source=footer>.-- You received this message because you are subscribed tothe Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/9b398246-6866-46d5-b96b-eb82fe294185n%40googlegroups.com <https://groups.google.com/d/msgid/weewx-user/9b398246-6866-46d5-b96b-eb82fe294185n%40googlegroups.com?utm_medium=email&utm_source=footer>.-- You received this message because you are subscribed to theGoogle Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/14f28ca7-b305-4d90-a15c-9e2dd4a3b470n%40googlegroups.com <https://groups.google.com/d/msgid/weewx-user/14f28ca7-b305-4d90-a15c-9e2dd4a3b470n%40googlegroups.com?utm_medium=email&utm_source=footer>.-- You received this message because you are subscribed to theGoogle Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/419a5e8a-65b5-4234-815f-12dcd2438b56n%40googlegroups.com <https://groups.google.com/d/msgid/weewx-user/419a5e8a-65b5-4234-815f-12dcd2438b56n%40googlegroups.com?utm_medium=email&utm_source=footer>.--You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected] <mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/b1fb2f5a-92a6-4cad-a916-b05d5b2c8451n%40googlegroups.com <https://groups.google.com/d/msgid/weewx-user/b1fb2f5a-92a6-4cad-a916-b05d5b2c8451n%40googlegroups.com?utm_medium=email&utm_source=footer>.
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/2993de6d-a93c-15ec-5cc4-e23f53cc9306%40gmail.com.
OpenPGP_0x55BE65AD1B41D696.asc
Description: application/pgp-keys
OpenPGP_signature
Description: OpenPGP digital signature
