I recently updated Weewx from ver 3.7.1 to 4.2.0 on a PI 2. After nearly 3 years running continuously it was time to get a new SD card going. The 3.7.1 update was from a earlier version 3 or later version 2 system. Hardware - Davis Vantage 2 with USB datalogger and USB connection to the PI. All code and drivers are straight out of the box from Debian/Raspbian installation. Back after the upgrade to 3.7.1 was made, all windDir outputs to charts and reporting to sites (CWOP, Wunderground on 5 minute intervals) were in discrete 22 degree increments. Back then, after searching the forums, a fix had been posted to get the average wind direction over the reporting interval rather than the discrete values. As I recall it was a simple change to a couple of code lines. Naturally, I didn't record the fix anywhere. After trying all the same searches on windDir, degrees, ordinals etc, I can't fix the fix so I can apply it to the 4.2.0 version. I would appreciate any help. I don't want to revert to my Weewx 3.7.1 imaged card for multiple reasons. Thanks in advance!
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/1089d5e1-a2a1-404e-ad13-d43a89644879n%40googlegroups.com.
