Done. Nothing new in log. Jan 4 07:59:09 corbett weewx[32526] INFO __main__: Initializing weewx version 4.2.0 Jan 4 07:59:09 corbett weewx[32526] INFO __main__: Using Python 2.7.13 (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 20170516] Jan 4 07:59:09 corbett weewx[32526] INFO __main__: Platform Linux-4.19.66-v7+-armv7l-with-debian-9.13 Jan 4 07:59:09 corbett weewx[32526] INFO __main__: Locale is 'en_US.UTF-8' Jan 4 07:59:09 corbett weewx[32526] INFO __main__: PID file is /var/run/weewx.pid Jan 4 07:59:09 corbett weewx[32531] INFO __main__: Using configuration file /etc/weewx/weewx.conf Jan 4 07:59:09 corbett weewx[32531] INFO __main__: Debug is 1 Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Loading station type Vantage (weewx.drivers.vantage) Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: StdConvert target unit is 0x1 Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Archive will use data binding wx_binding Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Record generation will be attempted in 'software' Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Using archive interval of 300 seconds (software record generation) Jan 4 07:59:09 corbett weewxd: forecast: MainThread: Zambretti: forecast version 3.3.2 Jan 4 07:59:09 corbett weewxd: forecast: MainThread: Zambretti: interval=600 max_age=604800 winddir_period=1800 pressure_period=10800 hemisphere=NORTH lower_pressure=950.0 upper_pressure=1050.0 Jan 4 07:59:09 corbett weewxd: forecast: MainThread: NWS: forecast version 3.3.2 Jan 4 07:59:09 corbett weewxd: forecast: MainThread: NWS: interval=10800 max_age=604800 lid=ORZ006 foid=PQR Jan 4 07:59:09 corbett weewxd: forecast: MainThread: WU: forecast version 3.3.2 Jan 4 07:59:09 corbett weewxd: forecast: MainThread: OWM: forecast version 3.3.2 Jan 4 07:59:09 corbett weewxd: forecast: MainThread: UKMO: forecast version 3.3.2 Jan 4 07:59:09 corbett weewxd: forecast: MainThread: Aeris: forecast version 3.3.2 Jan 4 07:59:09 corbett weewxd: forecast: MainThread: WWO: forecast version 3.3.2 Jan 4 07:59:09 corbett weewxd: forecast: MainThread: DS: forecast version 3.3.2 Jan 4 07:59:09 corbett weewxd: forecast: MainThread: XTide: forecast version 3.3.2 Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: StationRegistry: Station will be registered. Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: Wunderground: Posting not enabled. Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: PWSweather: Posting not enabled. Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: CWOP: Posting not enabled. Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: WOW: Posting not enabled. Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: AWEKAS: Posting not enabled. Jan 4 07:59:09 corbett weewx[32531] INFO user.mqtt: service version is 0.23 Jan 4 07:59:09 corbett weewx[32531] INFO user.mqtt: binding to archive Jan 4 07:59:09 corbett weewx[32531] INFO user.mqtt: topic is corbett/weather Jan 4 07:59:09 corbett weewx[32531] INFO user.mqtt: data will be uploaded to mqtt://127.0.0.1:1883 Jan 4 07:59:09 corbett weewx[32531] INFO __main__: Starting up weewx version 4.2.0 Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Clock error is 1.12 seconds (positive is fast) Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Using binding 'wx_binding' to database 'weewx.sdb' Jan 4 07:59:09 corbett weewx[32531] INFO weewx.manager: Starting backfill of daily summaries Jan 4 07:59:12 corbett weewx[32531] INFO weewx.engine: Starting main packet loop. Jan 4 08:00:15 corbett weewx[32531] INFO weewx.manager: Added record 2021-01-04 08:00:00 PST (1609776000) to database 'weewx.sdb' Jan 4 08:00:15 corbett weewx[32531] INFO weewx.manager: Added record 2021-01-04 08:00:00 PST (1609776000) to daily summary in 'weewx.sdb' Jan 4 08:00:15 corbett weewxd: forecast: NWSThread: NWS: downloading forecast from ' http://forecast.weather.gov/product.php?site=NWS&product=PFM&format=txt&issuedby=PQR ' Jan 4 08:00:15 corbett weewxd: forecast: ZambrettiThread: Zambretti: generated 1 forecast record Jan 4 08:00:15 corbett weewx[32531] INFO weewx.restx: MQTT: Published record 2021-01-04 08:00:00 PST (1609776000) Jan 4 08:00:16 corbett weewxd: forecast: NWSThread: NWS: got 38 forecast records for Scappoose-Columbia OR 45.77N 122.86W Elev. 49 ft Jan 4 08:00:16 corbett weewx[32531] INFO weewx.restx: StationRegistry: Published record 2021-01-04 08:00:00 PST (1609776000) Jan 4 08:00:21 corbett weewx[32531] INFO weewx.cheetahgenerator: Generated 7 files for report SeasonsReport in 5.30 seconds Jan 4 08:00:25 corbett weewx[32531] INFO weewx.imagegenerator: Generated 28 images for report SeasonsReport in 4.86 seconds Jan 4 08:00:26 corbett weewx[32531] INFO weewx.reportengine: Copied 87 files to /var/www/html/weewx Jan 4 08:00:26 corbett weewx[32531] INFO weewx.cheetahgenerator: Generated 6 files for report SmartphoneReport in 0.35 seconds Jan 4 08:00:28 corbett weewx[32531] INFO weewx.imagegenerator: Generated 12 images for report SmartphoneReport in 1.72 seconds Jan 4 08:00:28 corbett weewx[32531] INFO weewx.reportengine: Copied 6 files to /var/www/html/weewx/smart/ Jan 4 08:00:28 corbett weewx[32531] INFO weewx.cheetahgenerator: Generated 1 files for report MobileReport in 0.11 seconds Jan 4 08:00:28 corbett weewx[32531] INFO weewx.imagegenerator: Generated 4 images for report MobileReport in 0.28 seconds Jan 4 08:00:28 corbett weewx[32531] INFO weewx.reportengine: Copied 2 files to /var/www/html/weewx/mobile/ Jan 4 08:00:32 corbett weewx[32531] INFO weewx.cheetahgenerator: Generated 14 files for report StandardReport in 3.97 seconds Jan 4 08:00:36 corbett weewx[32531] INFO weewx.imagegenerator: Generated 24 images for report StandardReport in 3.69 seconds Jan 4 08:00:36 corbett weewx[32531] INFO weewx.reportengine: Copied 14 files to /var/www/html/weewx/standard Jan 4 08:05:15 corbett weewx[32531] INFO weewx.manager: Added record 2021-01-04 08:05:00 PST (1609776300) to database 'weewx.sdb' Jan 4 08:05:15 corbett weewx[32531] INFO weewx.manager: Added record 2021-01-04 08:05:00 PST (1609776300) to daily summary in 'weewx.sdb' Jan 4 08:05:15 corbett weewxd: forecast: NWSThread: NWS: downloading forecast from ' http://forecast.weather.gov/product.php?site=NWS&product=PFM&format=txt&issuedby=PQR ' Jan 4 08:05:15 corbett weewx[32531] INFO weewx.restx: MQTT: Published record 2021-01-04 08:05:00 PST (1609776300) Jan 4 08:05:15 corbett weewxd: forecast: NWSThread: NWS: got 38 forecast records for Scappoose-Columbia OR 45.77N 122.86W Elev. 49 ft Jan 4 08:05:17 corbett weewx[32531] INFO weewx.cheetahgenerator: Generated 7 files for report SeasonsReport in 1.68 seconds Jan 4 08:05:18 corbett weewx[32531] INFO weewx.imagegenerator: Generated 14 images for report SeasonsReport in 1.06 seconds Jan 4 08:05:18 corbett weewx[32531] INFO weewx.reportengine: Copied 0 files to /var/www/html/weewx Jan 4 08:05:18 corbett weewx[32531] INFO weewx.cheetahgenerator: Generated 6 files for report SmartphoneReport in 0.11 seconds Jan 4 08:05:19 corbett weewx[32531] INFO weewx.imagegenerator: Generated 6 images for report SmartphoneReport in 0.41 seconds Jan 4 08:05:19 corbett weewx[32531] INFO weewx.reportengine: Copied 0 files to /var/www/html/weewx/smart/ Jan 4 08:05:19 corbett weewx[32531] INFO weewx.cheetahgenerator: Generated 1 files for report MobileReport in 0.04 seconds Jan 4 08:05:19 corbett weewx[32531] INFO weewx.imagegenerator: Generated 4 images for report MobileReport in 0.28 seconds Jan 4 08:05:19 corbett weewx[32531] INFO weewx.reportengine: Copied 0 files to /var/www/html/weewx/mobile/ Jan 4 08:05:20 corbett weewx[32531] INFO weewx.cheetahgenerator: Generated 14 files for report StandardReport in 1.40 seconds Jan 4 08:05:21 corbett weewx[32531] INFO weewx.imagegenerator: Generated 12 images for report StandardReport in 0.85 seconds Jan 4 08:05:21 corbett weewx[32531] INFO weewx.reportengine: Copied 0 files to /var/www/html/weewx/standard
On Mon, Jan 4, 2021 at 3:16 AM gjr80 <[email protected]> wrote: > I suspect you have an error in the generation of your Seasons index.html > file that is being masked by log_failure = False under [StdReport] in > weewx.conf. Try changing this to log_failure = True, (leave debug = 1) > restart WeeWX and see what appears in the log. > > Gary > > On Monday, 4 January 2021 at 15:49:10 UTC+10 [email protected] wrote: > >> Thanks for the help Gary. I was literally 2 hours away at the beach, >> away from my Pi at the time that it's stuck at, so I know I didn't make any >> changes intentionally. The only correlation I can come up close to the >> 11:55pm time that it's stuck at is, each night @ 11:59pm via a cron job, I >> stop weewx, back it up and then restart it. Based on /var/log/messages, it >> was back up and running 18 seconds later. >> >> >> pi@corbett:~ $ wee_debug --info >> Using verbosity=1, displaying most info >> >> wee_debug output will be sent to stdout(console) >> >> Using configuration file /etc/weewx/weewx.conf >> Using database binding 'wx_binding', which is bound to database >> 'archive_sqlite' >> >> System info >> Platform: Linux-4.19.66-v7+-armv7l-with-debian-9.13 >> Python Version: 2.7.13 >> >> Load Information >> 1 minute load average: 0.00 >> 5 minute load average: 0.00 >> 15 minute load average: 0.00 >> >> General Weewx info >> Weewx version 4.2.0 detected. >> >> Station info >> Station type: Vantage >> Driver: weewx.drivers.vantage >> >> Driver info >> [Vantage] >> # This section is for the Davis Vantage series of weather stations. >> >> # Connection type: serial or ethernet >> # serial (the classic VantagePro) >> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) >> type = serial >> >> # If the connection type is serial, a port must be specified: >> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >> # /dev/ttyUSB0 is a common USB port name >> # /dev/ttyS0 is a common serial port name >> # BSD: >> # /dev/cuaU0 is a common serial port name >> port = /dev/ttyUSB0 >> >> # If the connection type is ethernet, an IP Address/hostname is >> required: >> host = 1.2.3.4 >> >> ###################################################### >> # The rest of this section rarely needs any attention. >> # You can safely leave it "as is." >> ###################################################### >> >> # Serial baud rate (usually 19200) >> baudrate = 19200 >> >> # TCP port (when using the WeatherLinkIP) >> tcp_port = 22222 >> >> # TCP send delay (when using the WeatherLinkIP): >> tcp_send_delay = 0.5 >> >> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both >> loop_request = 1 >> >> # The id of your ISS station (usually 1). If you use a wind meter >> connected >> # to a anemometer transmitter kit, use its id >> iss_id = 1 >> >> # How long to wait for a response from the station before giving up >> (in >> # seconds; must be greater than 2) >> timeout = 4 >> >> # How long to wait before trying again (in seconds) >> wait_before_retry = 1.2 >> >> # How many times to try before giving up: >> max_tries = 4 >> >> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >> model_type = 2 >> >> # The driver to use: >> driver = weewx.drivers.vantage >> >> Currently installed extensions >> Extension Name Version Description >> mqtt 0.23 Upload weather data to MQTT server. >> forecast 3.3.2 Generate and display weather and tide >> forecasts. >> >> Archive info >> Database name: weewx.sdb >> Table name: archive >> Version 2 >> Unit system: 1 (US) >> First good timestamp: 2019-07-03 21:35:00 PDT (1562214900) >> Last good timestamp: 2021-01-03 20:10:00 PST (1609733400) >> Number of records: 156772 >> weewx (weewx.conf) is set to use an archive interval of 300 seconds. >> The station hardware was not interrogated in determining archive >> interval. >> >> Databases configured in weewx.conf >> Database name: weewx.sdb >> Database driver: weedb.sqlite >> >> Database name: weewx >> Database driver: weedb.mysql >> Database host: localhost >> >> Database name: forecast.sdb >> Database driver: weedb.sqlite >> >> >> Parsed and obfuscated weewx.conf >> # WEEWX CONFIGURATION FILE >> # >> # Copyright (c) 2009-2019 Tom Keffer <[email protected]> >> # See the file LICENSE.txt for your rights. >> >> >> ############################################################################## >> >> # This section is for general configuration information. >> >> # Set to 1 for extra debug info, otherwise comment it out or set to zero >> debug = 1 >> >> # Root directory of the weewx data file hierarchy for this station >> WEEWX_ROOT = / >> >> # Whether to log successful operations >> log_success = True >> >> # Whether to log unsuccessful operations >> log_failure = True >> >> # How long to wait before timing out a socket (FTP, HTTP) connection >> socket_timeout = 20 >> >> # Do not modify this. It is used when installing and updating weewx. >> version = 4.2.0 >> >> >> ############################################################################## >> >> # This section is for information about the station. >> >> [Station] >> >> # Description of the station location >> location = "Corbett Ln. : Portland, OR" >> >> # Latitude and longitude in decimal degrees >> latitude = 45.4557641 >> longitude = -122.6769627 >> >> # Altitude of the station, with unit it is in. This is downloaded from >> # from the station if the hardware supports it. >> altitude = 475, foot >> >> # Set to type of station hardware. There must be a corresponding >> stanza >> # in this file with a 'driver' parameter indicating the driver to be >> used. >> station_type = Vantage >> >> # If you have a website, you may specify an URL >> station_url = XXX obfuscated by wee_debug XXX >> >> # The start of the rain year (1=January; 10=October, etc.). This is >> # downloaded from the station if the hardware supports it. >> rain_year_start = 10 >> >> # Start of week (0=Monday, 6=Sunday) >> week_start = 6 >> >> >> ############################################################################## >> >> [Vantage] >> # This section is for the Davis Vantage series of weather stations. >> >> # Connection type: serial or ethernet >> # serial (the classic VantagePro) >> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) >> type = serial >> >> # If the connection type is serial, a port must be specified: >> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >> # /dev/ttyUSB0 is a common USB port name >> # /dev/ttyS0 is a common serial port name >> # BSD: >> # /dev/cuaU0 is a common serial port name >> port = /dev/ttyUSB0 >> >> # If the connection type is ethernet, an IP Address/hostname is >> required: >> host = 1.2.3.4 >> >> ###################################################### >> # The rest of this section rarely needs any attention. >> # You can safely leave it "as is." >> ###################################################### >> >> # Serial baud rate (usually 19200) >> baudrate = 19200 >> >> # TCP port (when using the WeatherLinkIP) >> tcp_port = 22222 >> >> # TCP send delay (when using the WeatherLinkIP): >> tcp_send_delay = 0.5 >> >> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both >> loop_request = 1 >> >> # The id of your ISS station (usually 1). If you use a wind meter >> connected >> # to a anemometer transmitter kit, use its id >> iss_id = 1 >> >> # How long to wait for a response from the station before giving up >> (in >> # seconds; must be greater than 2) >> timeout = 4 >> >> # How long to wait before trying again (in seconds) >> wait_before_retry = 1.2 >> >> # How many times to try before giving up: >> max_tries = 4 >> >> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >> model_type = 2 >> >> # The driver to use: >> driver = weewx.drivers.vantage >> >> >> ############################################################################## >> >> [AcuRite] >> # This section is for AcuRite weather stations. >> >> # The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C' >> model = AcuRite 01036 >> >> # The driver to use: >> driver = weewx.drivers.acurite >> >> >> ############################################################################## >> >> # This section is for uploading data to Internet sites >> >> [StdRESTful] >> >> [[MQTT]] >> server_url = XXX obfuscated by wee_debug XXX >> topic = corbett/weather >> retain = True >> >> [[StationRegistry]] >> # To register this weather station with weewx, set this to true >> register_this_station = true >> >> [[AWEKAS]] >> # This section is for configuring posts to AWEKAS. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify a username and password. >> # To guard against parsing errors, put the password in quotes. >> enable = false >> username = XXX obfuscated by wee_debug XXX >> password = XXX obfuscated by wee_debug XXX >> >> [[CWOP]] >> # This section is for configuring posts to CWOP. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify the station ID (e.g., CW1234). >> enable = false >> station = XXX obfuscated by wee_debug XXX >> >> # If this is an APRS (radio amateur) station, uncomment >> # the following and replace with a passcode (e.g., 12345). >> #passcode = replace_me (APRS stations only) >> >> [[PWSweather]] >> # This section is for configuring posts to PWSweather.com. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify a station and password. >> # To guard against parsing errors, put the password in quotes. >> enable = false >> station = XXX obfuscated by wee_debug XXX >> password = XXX obfuscated by wee_debug XXX >> >> [[WOW]] >> # This section is for configuring posts to WOW. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify a station and password. >> # To guard against parsing errors, put the password in quotes. >> enable = false >> station = XXX obfuscated by wee_debug XXX >> password = XXX obfuscated by wee_debug XXX >> >> [[Wunderground]] >> # This section is for configuring posts to the Weather >> Underground. >> >> # If you wish to do this, set the option 'enable' to true, >> # and specify a station (e.g., 'KORHOODR3') and password. >> # To guard against parsing errors, put the password in quotes. >> enable = false >> station = XXX obfuscated by wee_debug XXX >> password = XXX obfuscated by wee_debug XXX >> >> # Set the following to True to have weewx use the WU "Rapidfire" >> # protocol. Not all hardware can support it. See the User's Guide. >> rapidfire = false >> >> # If you plan on using wunderfixer, set the following >> # to your API key: >> api_key = XXX obfuscated by wee_debug XXX >> >> >> ############################################################################## >> >> # This section specifies what reports, using which skins, to generate. >> >> [StdReport] >> >> # Where the skins reside, relative to WEEWX_ROOT >> SKIN_ROOT = /etc/weewx/skins >> >> # Where the generated reports should go, relative to WEEWX_ROOT >> HTML_ROOT = /var/www/html/weewx >> >> # The database binding indicates which data should be used in reports. >> data_binding = wx_binding >> >> # Whether to log a successful operation >> log_success = True >> >> # Whether to log an unsuccessful operation >> log_failure = False >> >> #### >> >> # Each of the following subsections defines a report that will be run. >> # See the customizing guide to change the units, plot types and line >> # colors, modify the fonts, display additional sensor data, and other >> # customizations. Many of those changes can be made here by overriding >> # parameters, or by modifying templates within the skin itself. >> >> [[SeasonsReport]] >> # The SeasonsReport uses the 'Seasons' skin, which contains the >> # images, templates and plots for the report. >> skin = Seasons >> enable = true >> >> [[[CheetahGenerator]]] >> search_list_extensions = user.forecast.ForecastVariables >> [[[CopyGenerator]]] >> copy_once = seasons.css, seasons.js, favicon.ico, >> font/*.woff, font/*.woff2, forecast_strip.css, icons/* >> >> [[SmartphoneReport]] >> # The SmartphoneReport uses the 'Smartphone' skin, and the images >> and >> # files are placed in a dedicated subdirectory. >> skin = Smartphone >> enable = true >> HTML_ROOT = /var/www/html/weewx/smart/ >> >> [[MobileReport]] >> # The MobileReport uses the 'Mobile' skin, and the images and >> files >> # are placed in a dedicated subdirectory. >> skin = Mobile >> enable = true >> HTML_ROOT = /var/www/html/weewx/mobile/ >> >> [[StandardReport]] >> # This is the old "Standard" skin. By default, it is not enabled. >> skin = Standard >> enable = true >> HTML_ROOT = /var/www/html/weewx/standard >> >> [[forecast]] >> enable = false >> HTML_ROOT = /var/www/html/weewx/forecast >> skin = forecast >> >> [[FTP]] >> # FTP'ing the results to a webserver is treated as just another >> report, >> # albeit one with an unusual report generator! >> skin = Ftp >> >> # If you wish to use FTP, set "enable" to "true", then >> # fill out the next four lines. >> # Use quotes around passwords to guard against parsing errors. >> enable = false >> user = XXX obfuscated by wee_debug XXX >> password = XXX obfuscated by wee_debug XXX >> server = replace_me # The ftp server name, e.g, >> www.myserver.org >> path = replace_me # The destination directory, e.g., /weather >> >> # Set to True for an FTP over TLS (FTPS) connection. Not all >> servers >> # support this. >> secure_ftp = False >> >> # To upload files from something other than what HTML_ROOT is set >> # to above, specify a different HTML_ROOT here. >> #HTML_ROOT = /var/www/html/weewx >> >> # Most FTP servers use port 21 >> port = 21 >> >> # Set to 1 to use passive mode, zero for active mode >> passive = 1 >> >> [[RSYNC]] >> # rsync'ing to a webserver is treated as just another report >> skin = Rsync >> >> # If you wish to use rsync, you must configure passwordless ssh >> using >> # public/private key authentication from the user account that >> weewx >> # runs to the user account on the remote machine where the files >> # will be copied. >> # >> # If you wish to use rsync, set "enable" to "true", then >> # fill out server, user, and path. >> # The server should appear in your .ssh/config file. >> # The user is the username used in the identity file. >> # The path is the destination directory, such as >> /var/www/html/weather. >> # Be sure that the user has write permissions on the destination! >> enable = false >> server = replace_me >> user = XXX obfuscated by wee_debug XXX >> path = replace_me >> >> # To upload files from something other than what HTML_ROOT is set >> # to above, specify a different HTML_ROOT here. >> #HTML_ROOT = /var/www/html/weewx >> >> # Rsync can be configured to remove files from the remote server >> if >> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if >> you >> # make a mistake in the remote path, you could could >> unintentionally >> # cause unrelated files to be deleted. Set to 1 to enable remote >> file >> # deletion, zero to allow files to accumulate remotely. >> delete = 0 >> >> #### >> >> # Various options for customizing your reports. >> >> [[Defaults]] >> >> [[[Units]]] >> >> # The following section sets what unit to use for each unit >> group. >> # NB: The unit is always in the singular. I.e., >> 'mile_per_hour', >> # NOT 'miles_per_hour' >> [[[[Groups]]]] >> >> group_altitude = foot # Options are 'foot' or 'meter' >> group_degree_day = degree_F_day # Options are >> 'degree_F_day' or 'degree_C_day' >> group_pressure = inHg # Options are 'inHg', 'mmHg', >> 'mbar', or 'hPa' >> group_rain = inch # Options are 'inch', 'cm', or 'mm' >> group_rainrate = inch_per_hour # Options are >> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' >> group_speed = mile_per_hour # Options are >> 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' >> group_speed2 = mile_per_hour2 # Options are >> 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' >> group_temperature = degree_F # Options are 'degree_F' >> or 'degree_C' >> group_distance = mile >> >> # The following section sets the formatting for each type of >> unit. >> [[[[StringFormats]]]] >> >> centibar = %.0f >> cm = %.2f >> cm_per_hour = %.2f >> degree_C = %.1f >> degree_F = %.1f >> degree_compass = %.0f >> foot = %.0f >> hPa = %.1f >> hour = %.1f >> inHg = %.3f >> inch = %.2f >> inch_per_hour = %.2f >> km_per_hour = %.0f >> km_per_hour2 = %.1f >> knot = %.0f >> knot2 = %.1f >> mbar = %.1f >> meter = %.0f >> meter_per_second = %.1f >> meter_per_second2 = %.1f >> mile_per_hour = %.0f >> mile_per_hour2 = %.1f >> mm = %.1f >> mmHg = %.1f >> mm_per_hour = %.1f >> percent = %.0f >> second = %.0f >> uv_index = %.1f >> volt = %.1f >> watt_per_meter_squared = %.0f >> NONE = " N/A" >> >> # The following section sets the label for each type of unit >> [[[[Labels]]]] >> >> day = " day", " days" >> hour = " hour", " hours" >> minute = " minute", " minutes" >> second = " second", " seconds" >> NONE = "" >> >> # The following section sets the format for each time scale. >> # The values below will work in every locale, but they may >> not look >> # particularly attractive. >> [[[[TimeFormats]]]] >> >> hour = %H:%M >> day = %X >> week = %X (%A) >> month = %x %X >> year = %x %X >> rainyear = %x %X >> current = %x %X >> ephem_day = %X >> ephem_year = %x %X >> >> [[[[Ordinates]]]] >> >> # Ordinal directions. The last one is for no wind >> direction >> directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, >> SW, WSW, W, WNW, NW, NNW, N/A >> >> # The following section sets the base temperatures used for >> the >> # calculation of heating and cooling degree-days. >> [[[[DegreeDays]]]] >> >> # Base temperature for heating days, with unit: >> heating_base = 65, degree_F >> # Base temperature for cooling days, with unit: >> cooling_base = 65, degree_F >> # Base temperature for growing days, with unit: >> growing_base = 50.0, degree_F >> >> # A trend takes a difference across a time period. The >> following >> # section sets the time period, and how big an error is >> allowed to >> # still be counted as the start or end of a period. >> [[[[Trend]]]] >> >> time_delta = 10800 # 3 hours >> time_grace = 300 # 5 minutes >> >> # The labels to be used for each observation type >> [[[Labels]]] >> >> # Set to hemisphere abbreviations suitable for your location: >> hemispheres = N, S, E, W >> >> # Formats to be used for latitude whole degrees, longitude >> whole >> # degrees, and minutes: >> latlon_formats = %02d, %03d, %05.2f >> >> # Generic labels, keyed by an observation type. >> [[[[Generic]]]] >> barometer = Barometer >> dewpoint = Dew Point >> ET = ET >> heatindex = Heat Index >> inHumidity = Inside Humidity >> inTemp = Inside Temperature >> outHumidity = Humidity >> outTemp = Outside Temperature >> radiation = Radiation >> rain = Rain >> rainRate = Rain Rate >> UV = UV Index >> windDir = Wind Direction >> windGust = Gust Speed >> windGustDir = Gust Direction >> windSpeed = Wind Speed >> windchill = Wind Chill >> windgustvec = Gust Vector >> windvec = Wind Vector >> extraTemp1 = Temperature1 >> extraTemp2 = Temperature2 >> extraTemp3 = Temperature3 >> >> # Sensor status indicators >> >> rxCheckPercent = Signal Quality >> txBatteryStatus = Transmitter Battery >> windBatteryStatus = Wind Battery >> rainBatteryStatus = Rain Battery >> outTempBatteryStatus = Outside Temperature Battery >> inTempBatteryStatus = Inside Temperature Battery >> consBatteryVoltage = Console Battery >> heatingVoltage = Heating Battery >> supplyVoltage = Supply Voltage >> referenceVoltage = Reference Voltage >> >> [[[Almanac]]] >> >> # The labels to be used for the phases of the moon: >> moon_phases = New, Waxing crescent, First quarter, Waxing >> gibbous, Full, Waning gibbous, Last quarter, Waning crescent >> >> >> ############################################################################## >> >> # This service acts as a filter, converting the unit system coming from >> # the hardware to a unit system in the database. >> >> [StdConvert] >> >> # The target_unit affects only the unit system in the database. Once >> # chosen it cannot be changed without converting the entire database. >> # Modification of target_unit after starting weewx will result in >> # corrupt data - the database will contain a mix of US and METRIC >> data. >> # >> # The value of target_unit does not affect the unit system for >> # reporting - reports can display US, Metric, or any combination of >> units. >> # >> # In most cases, target_unit should be left as the default: US >> # >> # In particular, those migrating from a standard wview installation >> # should use US since that is what the wview database contains. >> >> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! >> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' >> >> >> ############################################################################## >> >> # This section can adjust data using calibration expressions. >> >> [StdCalibrate] >> >> [[Corrections]] >> # For each type, an arbitrary calibration expression can be given. >> # It should be in the units defined in the StdConvert section. >> # Example: >> foo = foo + 0.2 >> >> >> ############################################################################## >> >> # This section is for quality control checks. If units are not >> specified, >> # values must be in the units defined in the StdConvert section. >> >> [StdQC] >> >> [[MinMax]] >> barometer = 26, 32.5, inHg >> pressure = 24, 34.5, inHg >> outTemp = -40, 120, degree_F >> inTemp = 10, 120, degree_F >> outHumidity = 0, 100 >> inHumidity = 0, 100 >> windSpeed = 0, 120, mile_per_hour >> rain = 0, 10, inch >> >> >> ############################################################################## >> >> # This section controls the origin of derived values. >> >> [StdWXCalculate] >> >> [[Calculations]] >> # How to calculate derived quantities. Possible values are: >> # hardware - use the value provided by hardware >> # software - use the value calculated by weewx >> # prefer_hardware - use value provide by hardware if available, >> # otherwise use value calculated by weewx >> >> pressure = prefer_hardware >> barometer = prefer_hardware >> altimeter = prefer_hardware >> windchill = prefer_hardware >> heatindex = prefer_hardware >> dewpoint = prefer_hardware >> inDewpoint = prefer_hardware >> rainRate = prefer_hardware >> maxSolarRad = prefer_hardware >> cloudbase = prefer_hardware >> humidex = prefer_hardware >> appTemp = prefer_hardware >> ET = prefer_hardware >> windrun = prefer_hardware >> >> >> ############################################################################## >> >> # For hardware that supports it, this section controls how often the >> # onboard clock gets updated. >> >> [StdTimeSynch] >> >> # How often to check the weather station clock for drift (in seconds) >> clock_check = 14400 >> >> # How much it can drift before we will correct it (in seconds) >> max_drift = 5 >> >> >> ############################################################################## >> >> # This section is for configuring the archive service. >> >> [StdArchive] >> >> # If the station hardware supports data logging then the archive >> interval >> # will be downloaded from the station. Otherwise, specify it (in >> seconds). >> archive_interval = 300 >> >> # If possible, new archive records are downloaded from the station >> # hardware. If the hardware does not support this, then new archive >> # records will be generated in software. >> # Set the following to "software" to force software record generation. >> record_generation = software >> >> # Whether to include LOOP data in hi/low statistics >> loop_hilo = True >> >> # The data binding used to save archive records >> data_binding = wx_binding >> >> >> ############################################################################## >> >> # This section binds a data store to a database. >> >> [DataBindings] >> >> [[wx_binding]] >> # The database must match one of the sections in [Databases]. >> # This is likely to be the only option you would want to change. >> database = archive_sqlite >> # The name of the table within the database >> table_name = archive >> # The manager handles aggregation of data for historical summaries >> manager = weewx.wxmanager.WXDaySummaryManager >> # The schema defines the structure of the database. >> # It is *only* used when the database is created. >> schema = schemas.wview.schema >> [[forecast_binding]] >> database = forecast_sqlite >> >> >> ############################################################################## >> >> # This section defines various databases. >> >> [Databases] >> >> # A SQLite database is simply a single file >> [[archive_sqlite]] >> database_name = weewx.sdb >> database_type = SQLite >> >> # MySQL >> [[archive_mysql]] >> database_name = weewx >> database_type = MySQL >> [[forecast_sqlite]] >> database_name = forecast.sdb >> database_type = SQLite >> >> >> ############################################################################## >> >> # This section defines defaults for the different types of databases. >> >> [DatabaseTypes] >> >> # Defaults for SQLite databases >> [[SQLite]] >> driver = weedb.sqlite >> # Directory in which the database files are located >> SQLITE_ROOT = /var/lib/weewx >> >> # Defaults for MySQL databases >> [[MySQL]] >> driver = weedb.mysql >> # The host where the database is located >> host = localhost >> # The user name for logging in to the host >> user = XXX obfuscated by wee_debug XXX >> # The password for the user name (quotes guard against parsing >> errors) >> password = XXX obfuscated by wee_debug XXX >> >> >> ############################################################################## >> >> # This section configures the internal weewx engine. >> >> [Engine] >> # The following section specifies which services should be run and in >> what order. >> [[Services]] >> prep_services = weewx.engine.StdTimeSynch >> data_services = , >> process_services = weewx.engine.StdConvert, >> weewx.engine.StdCalibrate, weewx.engine.StdQC, >> weewx.wxservices.StdWXCalculate >> xtype_services = weewx.wxxtypes.StdWXXTypes, >> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, >> weewx.wxxtypes.StdDelta >> archive_services = weewx.engine.StdArchive, >> user.forecast.ZambrettiForecast, user.forecast.NWSForecast, >> user.forecast.WUForecast, user.forecast.OWMForecast, >> user.forecast.UKMOForecast, user.forecast.AerisForecast, >> user.forecast.WWOForecast, user.forecast.DSForecast, >> user.forecast.XTideForecast >> restful_services = weewx.restx.StdStationRegistry, >> weewx.restx.StdWunderground, weewx.restx.StdPWSweather, >> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS, >> user.mqtt.MQTT >> report_services = weewx.engine.StdPrint, weewx.engine.StdReport >> >> >> ############################################################################## >> >> # Options for extension 'forecast' >> [Forecast] >> data_binding = forecast_binding >> [[OWM]] >> api_key = XXX obfuscated by wee_debug XXX >> [[WWO]] >> api_key = XXX obfuscated by wee_debug XXX >> [[WU]] >> api_key = XXX obfuscated by wee_debug XXX >> [[NWS]] >> lid = ORZ006 >> foid = PQR >> [[UKMO]] >> api_key = XXX obfuscated by wee_debug XXX >> location = INSERT_UK_LOCATION_HERE >> [[XTide]] >> location = "INSERT_LOCATION_HERE (e.g., Boston)" >> [[Zambretti]] >> hemisphere = NORTH >> [[Aeris]] >> client_secret = INSERT_AERIS_CLIENT_SECRET_HERE >> client_id = INSERT_AERIS_CLIENT_ID_HERE >> [[DS]] >> api_key = XXX obfuscated by wee_debug XXX >> >> wee_debug report successfully generated >> >> On Sun, Jan 3, 2021 at 7:31 PM gjr80 <[email protected]> wrote: >> >>> Hi, >>> >>> That is interesting, you have debug = 1 but the detail that is showing >>> in the log is less than there should be. Could you please post the output >>> from wee_debug --info >>> <http://weewx.com/docs/utilities.htm#wee_debug_utility>. Before posting >>> the wee_debug output check to make sure there is no sensitive info in >>> the output such as user names, passwords, api keys etc, wee_debug will >>> obfuscate such info but it is not perfect. >>> >>> Gary >>> >>> On Monday, 4 January 2021 at 12:58:27 UTC+10 [email protected] wrote: >>> >>>> On my Seasons skins, for some reason the index.html file isn't getting >>>> updated. I don't remember changing anything since the 1/1/21 @ 11:55pm >>>> timestamp of the last update. >>>> >>>> The Standard and Mobile versions are both updating correctly. >>>> >>>> http://wx.ke7k.com/ >>>> >>>> I changed debug = 1 and restarted.... >>>> >>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: Initializing weewx >>>> version 4.2.0 >>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: Using Python 2.7.13 >>>> (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 20170516] >>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: Platform >>>> Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: Locale is >>>> 'en_US.UTF-8' >>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: PID file is >>>> /var/run/weewx.pid >>>> Jan 3 18:24:29 corbett weewx[18569] INFO __main__: Using configuration >>>> file /etc/weewx/weewx.conf >>>> Jan 3 18:24:29 corbett weewx[18569] INFO __main__: Debug is 1 >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Loading station >>>> type Vantage (weewx.drivers.vantage) >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: StdConvert >>>> target unit is 0x1 >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Archive will >>>> use data binding wx_binding >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Record >>>> generation will be attempted in 'software' >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Using archive >>>> interval of 300 seconds (software record generation) >>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: Zambretti: >>>> forecast version 3.3.2 >>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: Zambretti: >>>> interval=600 max_age=604800 winddir_period=1800 pressure_period=10800 >>>> hemisphere=NORTH lower_pressure=950.0 upper_pressure=1050.0 >>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: NWS: forecast >>>> version 3.3.2 >>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: NWS: >>>> interval=10800 max_age=604800 lid=ORZ006 foid=PQR >>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: WU: forecast >>>> version 3.3.2 >>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: OWM: forecast >>>> version 3.3.2 >>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: UKMO: forecast >>>> version 3.3.2 >>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: Aeris: forecast >>>> version 3.3.2 >>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: WWO: forecast >>>> version 3.3.2 >>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: DS: forecast >>>> version 3.3.2 >>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: XTide: forecast >>>> version 3.3.2 >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: StationRegistry: >>>> Station will be registered. >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: Wunderground: >>>> Posting not enabled. >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: PWSweather: >>>> Posting not enabled. >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: CWOP: Posting >>>> not enabled. >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: WOW: Posting not >>>> enabled. >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: AWEKAS: Posting >>>> not enabled. >>>> Jan 3 18:24:29 corbett weewx[18569] INFO user.mqtt: service version is >>>> 0.23 >>>> Jan 3 18:24:29 corbett weewx[18569] INFO user.mqtt: binding to archive >>>> Jan 3 18:24:29 corbett weewx[18569] INFO user.mqtt: topic is >>>> corbett/weather >>>> Jan 3 18:24:29 corbett weewx[18569] INFO user.mqtt: data will be >>>> uploaded to mqtt://127.0.0.1:1883 >>>> Jan 3 18:24:29 corbett weewx[18569] INFO __main__: Starting up weewx >>>> version 4.2.0 >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Clock error is >>>> 0.07 seconds (positive is fast) >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Using binding >>>> 'wx_binding' to database 'weewx.sdb' >>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.manager: Starting >>>> backfill of daily summaries >>>> Jan 3 18:24:32 corbett weewx[18569] INFO weewx.engine: Starting main >>>> packet loop. >>>> Jan 3 18:25:14 corbett weewx[18569] INFO weewx.manager: Added record >>>> 2021-01-03 18:25:00 PST (1609727100) to database 'weewx.sdb' >>>> Jan 3 18:25:14 corbett weewx[18569] INFO weewx.manager: Added record >>>> 2021-01-03 18:25:00 PST (1609727100) to daily summary in 'weewx.sdb' >>>> Jan 3 18:25:14 corbett weewxd: forecast: NWSThread: NWS: downloading >>>> forecast from ' >>>> http://forecast.weather.gov/product.php?site=NWS&product=PFM&format=txt&issuedby=PQR >>>> ' >>>> Jan 3 18:25:15 corbett weewx[18569] INFO weewx.restx: MQTT: Published >>>> record 2021-01-03 18:25:00 PST (1609727100) >>>> Jan 3 18:25:15 corbett weewx[18569] INFO weewx.restx: StationRegistry: >>>> Published record 2021-01-03 18:25:00 PST (1609727100) >>>> Jan 3 18:25:15 corbett weewxd: forecast: ZambrettiThread: Zambretti: >>>> generated 1 forecast record >>>> Jan 3 18:25:20 corbett weewx[18569] INFO weewx.cheetahgenerator: >>>> Generated 7 files for report SeasonsReport in 5.29 seconds >>>> Jan 3 18:25:20 corbett weewxd: forecast: NWSThread: NWS: got 40 >>>> forecast records for Scappoose-Columbia OR 45.77N 122.86W Elev. 49 ft >>>> Jan 3 18:25:21 corbett weewx[18569] INFO weewx.imagegenerator: >>>> Generated 14 images for report SeasonsReport in 1.05 seconds >>>> Jan 3 18:25:21 corbett weewx[18569] INFO weewx.reportengine: Copied 87 >>>> files to /var/www/html/weewx >>>> Jan 3 18:25:21 corbett weewx[18569] INFO weewx.cheetahgenerator: >>>> Generated 6 files for report SmartphoneReport in 0.35 seconds >>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.imagegenerator: >>>> Generated 6 images for report SmartphoneReport in 0.38 seconds >>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.reportengine: Copied 6 >>>> files to /var/www/html/weewx/smart/ >>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.cheetahgenerator: >>>> Generated 1 files for report MobileReport in 0.11 seconds >>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.imagegenerator: >>>> Generated 4 images for report MobileReport in 0.26 seconds >>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.reportengine: Copied 2 >>>> files to /var/www/html/weewx/mobile/ >>>> Jan 3 18:25:26 corbett weewx[18569] INFO weewx.cheetahgenerator: >>>> Generated 14 files for report StandardReport in 3.95 seconds >>>> Jan 3 18:25:27 corbett weewx[18569] INFO weewx.imagegenerator: >>>> Generated 12 images for report StandardReport in 0.80 seconds >>>> Jan 3 18:25:27 corbett weewx[18569] INFO weewx.reportengine: Copied 14 >>>> files to /var/www/html/weewx/standard >>>> >>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/abfd3be6-b829-4b40-98c4-751dcc0cf047n%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/abfd3be6-b829-4b40-98c4-751dcc0cf047n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/85887876-1b16-4c71-a060-e203b54b3f15n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/85887876-1b16-4c71-a060-e203b54b3f15n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAHiQ_B3mc1EtEArhW%2BZb_SSM5JKS_-N9d5uVqBWmNgAFQa%2B80g%40mail.gmail.com.
