Bizarre, 8 am still confident there is something in your Seasons index.html.tmpl that is causing an error hence it’s not generated. Can you post your copy of Seasons index.html.tmpl? Maybe something will stand out.
Gary On Tuesday, 5 January 2021 at 07:56:51 UTC+10 [email protected] wrote: > I just double checked /etc/weewx/weewx.conf and wee_debug and both are > showing debug = 1 and [StdReport] log_failure = True. > > Did another sudo /etc/init.d/weewx restart, still no DEBUG entries in > /var/log/messages. > > index.html in /var/www/html/weewx has the 1 January timestamp, but all the > graph images are up to date. > > index.html in /var/www/html/weewx/standard, mobile, and smart are all up > to date. > > > > > > On Mon, Jan 4, 2021 at 12:34 PM gjr80 <[email protected]> wrote: > >> Hmm, I’m still not convinced that the log is as it should be, log_failure >> under [StdReport] is definitely = True? When reports are generated there >> should be entries about skin.conf being found etc. Nonetheless, Seasons >> seems to be generating the correct number of files. Can you check the >> timestamp on /var/www/html/weewx/index.html, is it changing? Is it current >> or stuck on 1 January? >> >> Gary >> >> On Tuesday, 5 January 2021 at 02:10:09 UTC+10 [email protected] wrote: >> >>> Done. Nothing new in log. >>> >>> Jan 4 07:59:09 corbett weewx[32526] INFO __main__: Initializing weewx >>> version 4.2.0 >>> Jan 4 07:59:09 corbett weewx[32526] INFO __main__: Using Python 2.7.13 >>> (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 20170516] >>> Jan 4 07:59:09 corbett weewx[32526] INFO __main__: Platform >>> Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>> Jan 4 07:59:09 corbett weewx[32526] INFO __main__: Locale is >>> 'en_US.UTF-8' >>> Jan 4 07:59:09 corbett weewx[32526] INFO __main__: PID file is >>> /var/run/weewx.pid >>> Jan 4 07:59:09 corbett weewx[32531] INFO __main__: Using configuration >>> file /etc/weewx/weewx.conf >>> Jan 4 07:59:09 corbett weewx[32531] INFO __main__: Debug is 1 >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Loading station >>> type Vantage (weewx.drivers.vantage) >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: StdConvert >>> target unit is 0x1 >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Archive will use >>> data binding wx_binding >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Record >>> generation will be attempted in 'software' >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Using archive >>> interval of 300 seconds (software record generation) >>> Jan 4 07:59:09 corbett weewxd: forecast: MainThread: Zambretti: >>> forecast version 3.3.2 >>> Jan 4 07:59:09 corbett weewxd: forecast: MainThread: Zambretti: >>> interval=600 max_age=604800 winddir_period=1800 pressure_period=10800 >>> hemisphere=NORTH lower_pressure=950.0 upper_pressure=1050.0 >>> Jan 4 07:59:09 corbett weewxd: forecast: MainThread: NWS: forecast >>> version 3.3.2 >>> Jan 4 07:59:09 corbett weewxd: forecast: MainThread: NWS: >>> interval=10800 max_age=604800 lid=ORZ006 foid=PQR >>> Jan 4 07:59:09 corbett weewxd: forecast: MainThread: WU: forecast >>> version 3.3.2 >>> Jan 4 07:59:09 corbett weewxd: forecast: MainThread: OWM: forecast >>> version 3.3.2 >>> Jan 4 07:59:09 corbett weewxd: forecast: MainThread: UKMO: forecast >>> version 3.3.2 >>> Jan 4 07:59:09 corbett weewxd: forecast: MainThread: Aeris: forecast >>> version 3.3.2 >>> Jan 4 07:59:09 corbett weewxd: forecast: MainThread: WWO: forecast >>> version 3.3.2 >>> Jan 4 07:59:09 corbett weewxd: forecast: MainThread: DS: forecast >>> version 3.3.2 >>> Jan 4 07:59:09 corbett weewxd: forecast: MainThread: XTide: forecast >>> version 3.3.2 >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: StationRegistry: >>> Station will be registered. >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: Wunderground: >>> Posting not enabled. >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: PWSweather: >>> Posting not enabled. >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: CWOP: Posting not >>> enabled. >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: WOW: Posting not >>> enabled. >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: AWEKAS: Posting >>> not enabled. >>> Jan 4 07:59:09 corbett weewx[32531] INFO user.mqtt: service version is >>> 0.23 >>> Jan 4 07:59:09 corbett weewx[32531] INFO user.mqtt: binding to archive >>> Jan 4 07:59:09 corbett weewx[32531] INFO user.mqtt: topic is >>> corbett/weather >>> Jan 4 07:59:09 corbett weewx[32531] INFO user.mqtt: data will be >>> uploaded to mqtt://127.0.0.1:1883 >>> Jan 4 07:59:09 corbett weewx[32531] INFO __main__: Starting up weewx >>> version 4.2.0 >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Clock error is >>> 1.12 seconds (positive is fast) >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Using binding >>> 'wx_binding' to database 'weewx.sdb' >>> Jan 4 07:59:09 corbett weewx[32531] INFO weewx.manager: Starting >>> backfill of daily summaries >>> Jan 4 07:59:12 corbett weewx[32531] INFO weewx.engine: Starting main >>> packet loop. >>> Jan 4 08:00:15 corbett weewx[32531] INFO weewx.manager: Added record >>> 2021-01-04 08:00:00 PST (1609776000) to database 'weewx.sdb' >>> Jan 4 08:00:15 corbett weewx[32531] INFO weewx.manager: Added record >>> 2021-01-04 08:00:00 PST (1609776000) to daily summary in 'weewx.sdb' >>> Jan 4 08:00:15 corbett weewxd: forecast: NWSThread: NWS: downloading >>> forecast from ' >>> http://forecast.weather.gov/product.php?site=NWS&product=PFM&format=txt&issuedby=PQR >>> ' >>> Jan 4 08:00:15 corbett weewxd: forecast: ZambrettiThread: Zambretti: >>> generated 1 forecast record >>> Jan 4 08:00:15 corbett weewx[32531] INFO weewx.restx: MQTT: Published >>> record 2021-01-04 08:00:00 PST (1609776000) >>> Jan 4 08:00:16 corbett weewxd: forecast: NWSThread: NWS: got 38 >>> forecast records for Scappoose-Columbia OR 45.77N 122.86W Elev. 49 ft >>> Jan 4 08:00:16 corbett weewx[32531] INFO weewx.restx: StationRegistry: >>> Published record 2021-01-04 08:00:00 PST (1609776000) >>> Jan 4 08:00:21 corbett weewx[32531] INFO weewx.cheetahgenerator: >>> Generated 7 files for report SeasonsReport in 5.30 seconds >>> Jan 4 08:00:25 corbett weewx[32531] INFO weewx.imagegenerator: >>> Generated 28 images for report SeasonsReport in 4.86 seconds >>> Jan 4 08:00:26 corbett weewx[32531] INFO weewx.reportengine: Copied 87 >>> files to /var/www/html/weewx >>> Jan 4 08:00:26 corbett weewx[32531] INFO weewx.cheetahgenerator: >>> Generated 6 files for report SmartphoneReport in 0.35 seconds >>> Jan 4 08:00:28 corbett weewx[32531] INFO weewx.imagegenerator: >>> Generated 12 images for report SmartphoneReport in 1.72 seconds >>> Jan 4 08:00:28 corbett weewx[32531] INFO weewx.reportengine: Copied 6 >>> files to /var/www/html/weewx/smart/ >>> Jan 4 08:00:28 corbett weewx[32531] INFO weewx.cheetahgenerator: >>> Generated 1 files for report MobileReport in 0.11 seconds >>> Jan 4 08:00:28 corbett weewx[32531] INFO weewx.imagegenerator: >>> Generated 4 images for report MobileReport in 0.28 seconds >>> Jan 4 08:00:28 corbett weewx[32531] INFO weewx.reportengine: Copied 2 >>> files to /var/www/html/weewx/mobile/ >>> Jan 4 08:00:32 corbett weewx[32531] INFO weewx.cheetahgenerator: >>> Generated 14 files for report StandardReport in 3.97 seconds >>> Jan 4 08:00:36 corbett weewx[32531] INFO weewx.imagegenerator: >>> Generated 24 images for report StandardReport in 3.69 seconds >>> Jan 4 08:00:36 corbett weewx[32531] INFO weewx.reportengine: Copied 14 >>> files to /var/www/html/weewx/standard >>> Jan 4 08:05:15 corbett weewx[32531] INFO weewx.manager: Added record >>> 2021-01-04 08:05:00 PST (1609776300) to database 'weewx.sdb' >>> Jan 4 08:05:15 corbett weewx[32531] INFO weewx.manager: Added record >>> 2021-01-04 08:05:00 PST (1609776300) to daily summary in 'weewx.sdb' >>> Jan 4 08:05:15 corbett weewxd: forecast: NWSThread: NWS: downloading >>> forecast from ' >>> http://forecast.weather.gov/product.php?site=NWS&product=PFM&format=txt&issuedby=PQR >>> ' >>> Jan 4 08:05:15 corbett weewx[32531] INFO weewx.restx: MQTT: Published >>> record 2021-01-04 08:05:00 PST (1609776300) >>> Jan 4 08:05:15 corbett weewxd: forecast: NWSThread: NWS: got 38 >>> forecast records for Scappoose-Columbia OR 45.77N 122.86W Elev. 49 ft >>> Jan 4 08:05:17 corbett weewx[32531] INFO weewx.cheetahgenerator: >>> Generated 7 files for report SeasonsReport in 1.68 seconds >>> Jan 4 08:05:18 corbett weewx[32531] INFO weewx.imagegenerator: >>> Generated 14 images for report SeasonsReport in 1.06 seconds >>> Jan 4 08:05:18 corbett weewx[32531] INFO weewx.reportengine: Copied 0 >>> files to /var/www/html/weewx >>> Jan 4 08:05:18 corbett weewx[32531] INFO weewx.cheetahgenerator: >>> Generated 6 files for report SmartphoneReport in 0.11 seconds >>> Jan 4 08:05:19 corbett weewx[32531] INFO weewx.imagegenerator: >>> Generated 6 images for report SmartphoneReport in 0.41 seconds >>> Jan 4 08:05:19 corbett weewx[32531] INFO weewx.reportengine: Copied 0 >>> files to /var/www/html/weewx/smart/ >>> Jan 4 08:05:19 corbett weewx[32531] INFO weewx.cheetahgenerator: >>> Generated 1 files for report MobileReport in 0.04 seconds >>> Jan 4 08:05:19 corbett weewx[32531] INFO weewx.imagegenerator: >>> Generated 4 images for report MobileReport in 0.28 seconds >>> Jan 4 08:05:19 corbett weewx[32531] INFO weewx.reportengine: Copied 0 >>> files to /var/www/html/weewx/mobile/ >>> Jan 4 08:05:20 corbett weewx[32531] INFO weewx.cheetahgenerator: >>> Generated 14 files for report StandardReport in 1.40 seconds >>> Jan 4 08:05:21 corbett weewx[32531] INFO weewx.imagegenerator: >>> Generated 12 images for report StandardReport in 0.85 seconds >>> Jan 4 08:05:21 corbett weewx[32531] INFO weewx.reportengine: Copied 0 >>> files to /var/www/html/weewx/standard >>> >>> On Mon, Jan 4, 2021 at 3:16 AM gjr80 <[email protected]> wrote: >>> >>>> I suspect you have an error in the generation of your Seasons >>>> index.html file that is being masked by log_failure = False under >>>> [StdReport] in weewx.conf. Try changing this to log_failure = True, (leave >>>> debug = 1) restart WeeWX and see what appears in the log. >>>> >>>> Gary >>>> >>>> On Monday, 4 January 2021 at 15:49:10 UTC+10 [email protected] wrote: >>>> >>>>> Thanks for the help Gary. I was literally 2 hours away at the beach, >>>>> away from my Pi at the time that it's stuck at, so I know I didn't make >>>>> any >>>>> changes intentionally. The only correlation I can come up close to the >>>>> 11:55pm time that it's stuck at is, each night @ 11:59pm via a cron job, >>>>> I >>>>> stop weewx, back it up and then restart it. Based on /var/log/messages, >>>>> it >>>>> was back up and running 18 seconds later. >>>>> >>>>> >>>>> pi@corbett:~ $ wee_debug --info >>>>> Using verbosity=1, displaying most info >>>>> >>>>> wee_debug output will be sent to stdout(console) >>>>> >>>>> Using configuration file /etc/weewx/weewx.conf >>>>> Using database binding 'wx_binding', which is bound to database >>>>> 'archive_sqlite' >>>>> >>>>> System info >>>>> Platform: Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>>>> Python Version: 2.7.13 >>>>> >>>>> Load Information >>>>> 1 minute load average: 0.00 >>>>> 5 minute load average: 0.00 >>>>> 15 minute load average: 0.00 >>>>> >>>>> General Weewx info >>>>> Weewx version 4.2.0 detected. >>>>> >>>>> Station info >>>>> Station type: Vantage >>>>> Driver: weewx.drivers.vantage >>>>> >>>>> Driver info >>>>> [Vantage] >>>>> # This section is for the Davis Vantage series of weather stations. >>>>> >>>>> # Connection type: serial or ethernet >>>>> # serial (the classic VantagePro) >>>>> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) >>>>> type = serial >>>>> >>>>> # If the connection type is serial, a port must be specified: >>>>> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >>>>> # /dev/ttyUSB0 is a common USB port name >>>>> # /dev/ttyS0 is a common serial port name >>>>> # BSD: >>>>> # /dev/cuaU0 is a common serial port name >>>>> port = /dev/ttyUSB0 >>>>> >>>>> # If the connection type is ethernet, an IP Address/hostname is >>>>> required: >>>>> host = 1.2.3.4 >>>>> >>>>> ###################################################### >>>>> # The rest of this section rarely needs any attention. >>>>> # You can safely leave it "as is." >>>>> ###################################################### >>>>> >>>>> # Serial baud rate (usually 19200) >>>>> baudrate = 19200 >>>>> >>>>> # TCP port (when using the WeatherLinkIP) >>>>> tcp_port = 22222 >>>>> >>>>> # TCP send delay (when using the WeatherLinkIP): >>>>> tcp_send_delay = 0.5 >>>>> >>>>> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = >>>>> both >>>>> loop_request = 1 >>>>> >>>>> # The id of your ISS station (usually 1). If you use a wind meter >>>>> connected >>>>> # to a anemometer transmitter kit, use its id >>>>> iss_id = 1 >>>>> >>>>> # How long to wait for a response from the station before giving >>>>> up (in >>>>> # seconds; must be greater than 2) >>>>> timeout = 4 >>>>> >>>>> # How long to wait before trying again (in seconds) >>>>> wait_before_retry = 1.2 >>>>> >>>>> # How many times to try before giving up: >>>>> max_tries = 4 >>>>> >>>>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >>>>> model_type = 2 >>>>> >>>>> # The driver to use: >>>>> driver = weewx.drivers.vantage >>>>> >>>>> Currently installed extensions >>>>> Extension Name Version Description >>>>> mqtt 0.23 Upload weather data to MQTT server. >>>>> forecast 3.3.2 Generate and display weather and tide >>>>> forecasts. >>>>> >>>>> Archive info >>>>> Database name: weewx.sdb >>>>> Table name: archive >>>>> Version 2 >>>>> Unit system: 1 (US) >>>>> First good timestamp: 2019-07-03 21:35:00 PDT (1562214900) >>>>> Last good timestamp: 2021-01-03 20:10:00 PST (1609733400) >>>>> Number of records: 156772 >>>>> weewx (weewx.conf) is set to use an archive interval of 300 seconds. >>>>> The station hardware was not interrogated in determining archive >>>>> interval. >>>>> >>>>> Databases configured in weewx.conf >>>>> Database name: weewx.sdb >>>>> Database driver: weedb.sqlite >>>>> >>>>> Database name: weewx >>>>> Database driver: weedb.mysql >>>>> Database host: localhost >>>>> >>>>> Database name: forecast.sdb >>>>> Database driver: weedb.sqlite >>>>> >>>>> >>>>> Parsed and obfuscated weewx.conf >>>>> # WEEWX CONFIGURATION FILE >>>>> # >>>>> # Copyright (c) 2009-2019 Tom Keffer <[email protected]> >>>>> # See the file LICENSE.txt for your rights. >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section is for general configuration information. >>>>> >>>>> # Set to 1 for extra debug info, otherwise comment it out or set to >>>>> zero >>>>> debug = 1 >>>>> >>>>> # Root directory of the weewx data file hierarchy for this station >>>>> WEEWX_ROOT = / >>>>> >>>>> # Whether to log successful operations >>>>> log_success = True >>>>> >>>>> # Whether to log unsuccessful operations >>>>> log_failure = True >>>>> >>>>> # How long to wait before timing out a socket (FTP, HTTP) connection >>>>> socket_timeout = 20 >>>>> >>>>> # Do not modify this. It is used when installing and updating weewx. >>>>> version = 4.2.0 >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section is for information about the station. >>>>> >>>>> [Station] >>>>> >>>>> # Description of the station location >>>>> location = "Corbett Ln. : Portland, OR" >>>>> >>>>> # Latitude and longitude in decimal degrees >>>>> latitude = 45.4557641 >>>>> longitude = -122.6769627 >>>>> >>>>> # Altitude of the station, with unit it is in. This is downloaded >>>>> from >>>>> # from the station if the hardware supports it. >>>>> altitude = 475, foot >>>>> >>>>> # Set to type of station hardware. There must be a corresponding >>>>> stanza >>>>> # in this file with a 'driver' parameter indicating the driver to >>>>> be used. >>>>> station_type = Vantage >>>>> >>>>> # If you have a website, you may specify an URL >>>>> station_url = XXX obfuscated by wee_debug XXX >>>>> >>>>> # The start of the rain year (1=January; 10=October, etc.). This is >>>>> # downloaded from the station if the hardware supports it. >>>>> rain_year_start = 10 >>>>> >>>>> # Start of week (0=Monday, 6=Sunday) >>>>> week_start = 6 >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> [Vantage] >>>>> # This section is for the Davis Vantage series of weather stations. >>>>> >>>>> # Connection type: serial or ethernet >>>>> # serial (the classic VantagePro) >>>>> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) >>>>> type = serial >>>>> >>>>> # If the connection type is serial, a port must be specified: >>>>> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >>>>> # /dev/ttyUSB0 is a common USB port name >>>>> # /dev/ttyS0 is a common serial port name >>>>> # BSD: >>>>> # /dev/cuaU0 is a common serial port name >>>>> port = /dev/ttyUSB0 >>>>> >>>>> # If the connection type is ethernet, an IP Address/hostname is >>>>> required: >>>>> host = 1.2.3.4 >>>>> >>>>> ###################################################### >>>>> # The rest of this section rarely needs any attention. >>>>> # You can safely leave it "as is." >>>>> ###################################################### >>>>> >>>>> # Serial baud rate (usually 19200) >>>>> baudrate = 19200 >>>>> >>>>> # TCP port (when using the WeatherLinkIP) >>>>> tcp_port = 22222 >>>>> >>>>> # TCP send delay (when using the WeatherLinkIP): >>>>> tcp_send_delay = 0.5 >>>>> >>>>> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = >>>>> both >>>>> loop_request = 1 >>>>> >>>>> # The id of your ISS station (usually 1). If you use a wind meter >>>>> connected >>>>> # to a anemometer transmitter kit, use its id >>>>> iss_id = 1 >>>>> >>>>> # How long to wait for a response from the station before giving >>>>> up (in >>>>> # seconds; must be greater than 2) >>>>> timeout = 4 >>>>> >>>>> # How long to wait before trying again (in seconds) >>>>> wait_before_retry = 1.2 >>>>> >>>>> # How many times to try before giving up: >>>>> max_tries = 4 >>>>> >>>>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >>>>> model_type = 2 >>>>> >>>>> # The driver to use: >>>>> driver = weewx.drivers.vantage >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> [AcuRite] >>>>> # This section is for AcuRite weather stations. >>>>> >>>>> # The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C' >>>>> model = AcuRite 01036 >>>>> >>>>> # The driver to use: >>>>> driver = weewx.drivers.acurite >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section is for uploading data to Internet sites >>>>> >>>>> [StdRESTful] >>>>> >>>>> [[MQTT]] >>>>> server_url = XXX obfuscated by wee_debug XXX >>>>> topic = corbett/weather >>>>> retain = True >>>>> >>>>> [[StationRegistry]] >>>>> # To register this weather station with weewx, set this to true >>>>> register_this_station = true >>>>> >>>>> [[AWEKAS]] >>>>> # This section is for configuring posts to AWEKAS. >>>>> >>>>> # If you wish to do this, set the option 'enable' to true, >>>>> # and specify a username and password. >>>>> # To guard against parsing errors, put the password in quotes. >>>>> enable = false >>>>> username = XXX obfuscated by wee_debug XXX >>>>> password = XXX obfuscated by wee_debug XXX >>>>> >>>>> [[CWOP]] >>>>> # This section is for configuring posts to CWOP. >>>>> >>>>> # If you wish to do this, set the option 'enable' to true, >>>>> # and specify the station ID (e.g., CW1234). >>>>> enable = false >>>>> station = XXX obfuscated by wee_debug XXX >>>>> >>>>> # If this is an APRS (radio amateur) station, uncomment >>>>> # the following and replace with a passcode (e.g., 12345). >>>>> #passcode = replace_me (APRS stations only) >>>>> >>>>> [[PWSweather]] >>>>> # This section is for configuring posts to PWSweather.com. >>>>> >>>>> # If you wish to do this, set the option 'enable' to true, >>>>> # and specify a station and password. >>>>> # To guard against parsing errors, put the password in quotes. >>>>> enable = false >>>>> station = XXX obfuscated by wee_debug XXX >>>>> password = XXX obfuscated by wee_debug XXX >>>>> >>>>> [[WOW]] >>>>> # This section is for configuring posts to WOW. >>>>> >>>>> # If you wish to do this, set the option 'enable' to true, >>>>> # and specify a station and password. >>>>> # To guard against parsing errors, put the password in quotes. >>>>> enable = false >>>>> station = XXX obfuscated by wee_debug XXX >>>>> password = XXX obfuscated by wee_debug XXX >>>>> >>>>> [[Wunderground]] >>>>> # This section is for configuring posts to the Weather >>>>> Underground. >>>>> >>>>> # If you wish to do this, set the option 'enable' to true, >>>>> # and specify a station (e.g., 'KORHOODR3') and password. >>>>> # To guard against parsing errors, put the password in quotes. >>>>> enable = false >>>>> station = XXX obfuscated by wee_debug XXX >>>>> password = XXX obfuscated by wee_debug XXX >>>>> >>>>> # Set the following to True to have weewx use the WU >>>>> "Rapidfire" >>>>> # protocol. Not all hardware can support it. See the User's >>>>> Guide. >>>>> rapidfire = false >>>>> >>>>> # If you plan on using wunderfixer, set the following >>>>> # to your API key: >>>>> api_key = XXX obfuscated by wee_debug XXX >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section specifies what reports, using which skins, to >>>>> generate. >>>>> >>>>> [StdReport] >>>>> >>>>> # Where the skins reside, relative to WEEWX_ROOT >>>>> SKIN_ROOT = /etc/weewx/skins >>>>> >>>>> # Where the generated reports should go, relative to WEEWX_ROOT >>>>> HTML_ROOT = /var/www/html/weewx >>>>> >>>>> # The database binding indicates which data should be used in >>>>> reports. >>>>> data_binding = wx_binding >>>>> >>>>> # Whether to log a successful operation >>>>> log_success = True >>>>> >>>>> # Whether to log an unsuccessful operation >>>>> log_failure = False >>>>> >>>>> #### >>>>> >>>>> # Each of the following subsections defines a report that will be >>>>> run. >>>>> # See the customizing guide to change the units, plot types and >>>>> line >>>>> # colors, modify the fonts, display additional sensor data, and >>>>> other >>>>> # customizations. Many of those changes can be made here by >>>>> overriding >>>>> # parameters, or by modifying templates within the skin itself. >>>>> >>>>> [[SeasonsReport]] >>>>> # The SeasonsReport uses the 'Seasons' skin, which contains the >>>>> # images, templates and plots for the report. >>>>> skin = Seasons >>>>> enable = true >>>>> >>>>> [[[CheetahGenerator]]] >>>>> search_list_extensions = user.forecast.ForecastVariables >>>>> [[[CopyGenerator]]] >>>>> copy_once = seasons.css, seasons.js, favicon.ico, >>>>> font/*.woff, font/*.woff2, forecast_strip.css, icons/* >>>>> >>>>> [[SmartphoneReport]] >>>>> # The SmartphoneReport uses the 'Smartphone' skin, and the >>>>> images and >>>>> # files are placed in a dedicated subdirectory. >>>>> skin = Smartphone >>>>> enable = true >>>>> HTML_ROOT = /var/www/html/weewx/smart/ >>>>> >>>>> [[MobileReport]] >>>>> # The MobileReport uses the 'Mobile' skin, and the images and >>>>> files >>>>> # are placed in a dedicated subdirectory. >>>>> skin = Mobile >>>>> enable = true >>>>> HTML_ROOT = /var/www/html/weewx/mobile/ >>>>> >>>>> [[StandardReport]] >>>>> # This is the old "Standard" skin. By default, it is not >>>>> enabled. >>>>> skin = Standard >>>>> enable = true >>>>> HTML_ROOT = /var/www/html/weewx/standard >>>>> >>>>> [[forecast]] >>>>> enable = false >>>>> HTML_ROOT = /var/www/html/weewx/forecast >>>>> skin = forecast >>>>> >>>>> [[FTP]] >>>>> # FTP'ing the results to a webserver is treated as just >>>>> another report, >>>>> # albeit one with an unusual report generator! >>>>> skin = Ftp >>>>> >>>>> # If you wish to use FTP, set "enable" to "true", then >>>>> # fill out the next four lines. >>>>> # Use quotes around passwords to guard against parsing errors. >>>>> enable = false >>>>> user = XXX obfuscated by wee_debug XXX >>>>> password = XXX obfuscated by wee_debug XXX >>>>> server = replace_me # The ftp server name, e.g, >>>>> www.myserver.org >>>>> path = replace_me # The destination directory, e.g., >>>>> /weather >>>>> >>>>> # Set to True for an FTP over TLS (FTPS) connection. Not all >>>>> servers >>>>> # support this. >>>>> secure_ftp = False >>>>> >>>>> # To upload files from something other than what HTML_ROOT is >>>>> set >>>>> # to above, specify a different HTML_ROOT here. >>>>> #HTML_ROOT = /var/www/html/weewx >>>>> >>>>> # Most FTP servers use port 21 >>>>> port = 21 >>>>> >>>>> # Set to 1 to use passive mode, zero for active mode >>>>> passive = 1 >>>>> >>>>> [[RSYNC]] >>>>> # rsync'ing to a webserver is treated as just another report >>>>> skin = Rsync >>>>> >>>>> # If you wish to use rsync, you must configure passwordless >>>>> ssh using >>>>> # public/private key authentication from the user account that >>>>> weewx >>>>> # runs to the user account on the remote machine where the >>>>> files >>>>> # will be copied. >>>>> # >>>>> # If you wish to use rsync, set "enable" to "true", then >>>>> # fill out server, user, and path. >>>>> # The server should appear in your .ssh/config file. >>>>> # The user is the username used in the identity file. >>>>> # The path is the destination directory, such as >>>>> /var/www/html/weather. >>>>> # Be sure that the user has write permissions on the >>>>> destination! >>>>> enable = false >>>>> server = replace_me >>>>> user = XXX obfuscated by wee_debug XXX >>>>> path = replace_me >>>>> >>>>> # To upload files from something other than what HTML_ROOT is >>>>> set >>>>> # to above, specify a different HTML_ROOT here. >>>>> #HTML_ROOT = /var/www/html/weewx >>>>> >>>>> # Rsync can be configured to remove files from the remote >>>>> server if >>>>> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: >>>>> if you >>>>> # make a mistake in the remote path, you could could >>>>> unintentionally >>>>> # cause unrelated files to be deleted. Set to 1 to enable >>>>> remote file >>>>> # deletion, zero to allow files to accumulate remotely. >>>>> delete = 0 >>>>> >>>>> #### >>>>> >>>>> # Various options for customizing your reports. >>>>> >>>>> [[Defaults]] >>>>> >>>>> [[[Units]]] >>>>> >>>>> # The following section sets what unit to use for each >>>>> unit group. >>>>> # NB: The unit is always in the singular. I.e., >>>>> 'mile_per_hour', >>>>> # NOT 'miles_per_hour' >>>>> [[[[Groups]]]] >>>>> >>>>> group_altitude = foot # Options are 'foot' or >>>>> 'meter' >>>>> group_degree_day = degree_F_day # Options are >>>>> 'degree_F_day' or 'degree_C_day' >>>>> group_pressure = inHg # Options are 'inHg', 'mmHg', >>>>> 'mbar', or 'hPa' >>>>> group_rain = inch # Options are 'inch', 'cm', or >>>>> 'mm' >>>>> group_rainrate = inch_per_hour # Options are >>>>> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' >>>>> group_speed = mile_per_hour # Options are >>>>> 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' >>>>> group_speed2 = mile_per_hour2 # Options are >>>>> 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' >>>>> group_temperature = degree_F # Options are >>>>> 'degree_F' or 'degree_C' >>>>> group_distance = mile >>>>> >>>>> # The following section sets the formatting for each type >>>>> of unit. >>>>> [[[[StringFormats]]]] >>>>> >>>>> centibar = %.0f >>>>> cm = %.2f >>>>> cm_per_hour = %.2f >>>>> degree_C = %.1f >>>>> degree_F = %.1f >>>>> degree_compass = %.0f >>>>> foot = %.0f >>>>> hPa = %.1f >>>>> hour = %.1f >>>>> inHg = %.3f >>>>> inch = %.2f >>>>> inch_per_hour = %.2f >>>>> km_per_hour = %.0f >>>>> km_per_hour2 = %.1f >>>>> knot = %.0f >>>>> knot2 = %.1f >>>>> mbar = %.1f >>>>> meter = %.0f >>>>> meter_per_second = %.1f >>>>> meter_per_second2 = %.1f >>>>> mile_per_hour = %.0f >>>>> mile_per_hour2 = %.1f >>>>> mm = %.1f >>>>> mmHg = %.1f >>>>> mm_per_hour = %.1f >>>>> percent = %.0f >>>>> second = %.0f >>>>> uv_index = %.1f >>>>> volt = %.1f >>>>> watt_per_meter_squared = %.0f >>>>> NONE = " N/A" >>>>> >>>>> # The following section sets the label for each type of >>>>> unit >>>>> [[[[Labels]]]] >>>>> >>>>> day = " day", " days" >>>>> hour = " hour", " hours" >>>>> minute = " minute", " minutes" >>>>> second = " second", " seconds" >>>>> NONE = "" >>>>> >>>>> # The following section sets the format for each time >>>>> scale. >>>>> # The values below will work in every locale, but they may >>>>> not look >>>>> # particularly attractive. >>>>> [[[[TimeFormats]]]] >>>>> >>>>> hour = %H:%M >>>>> day = %X >>>>> week = %X (%A) >>>>> month = %x %X >>>>> year = %x %X >>>>> rainyear = %x %X >>>>> current = %x %X >>>>> ephem_day = %X >>>>> ephem_year = %x %X >>>>> >>>>> [[[[Ordinates]]]] >>>>> >>>>> # Ordinal directions. The last one is for no wind >>>>> direction >>>>> directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, >>>>> SW, WSW, W, WNW, NW, NNW, N/A >>>>> >>>>> # The following section sets the base temperatures used >>>>> for the >>>>> # calculation of heating and cooling degree-days. >>>>> [[[[DegreeDays]]]] >>>>> >>>>> # Base temperature for heating days, with unit: >>>>> heating_base = 65, degree_F >>>>> # Base temperature for cooling days, with unit: >>>>> cooling_base = 65, degree_F >>>>> # Base temperature for growing days, with unit: >>>>> growing_base = 50.0, degree_F >>>>> >>>>> # A trend takes a difference across a time period. The >>>>> following >>>>> # section sets the time period, and how big an error is >>>>> allowed to >>>>> # still be counted as the start or end of a period. >>>>> [[[[Trend]]]] >>>>> >>>>> time_delta = 10800 # 3 hours >>>>> time_grace = 300 # 5 minutes >>>>> >>>>> # The labels to be used for each observation type >>>>> [[[Labels]]] >>>>> >>>>> # Set to hemisphere abbreviations suitable for your >>>>> location: >>>>> hemispheres = N, S, E, W >>>>> >>>>> # Formats to be used for latitude whole degrees, longitude >>>>> whole >>>>> # degrees, and minutes: >>>>> latlon_formats = %02d, %03d, %05.2f >>>>> >>>>> # Generic labels, keyed by an observation type. >>>>> [[[[Generic]]]] >>>>> barometer = Barometer >>>>> dewpoint = Dew Point >>>>> ET = ET >>>>> heatindex = Heat Index >>>>> inHumidity = Inside Humidity >>>>> inTemp = Inside Temperature >>>>> outHumidity = Humidity >>>>> outTemp = Outside Temperature >>>>> radiation = Radiation >>>>> rain = Rain >>>>> rainRate = Rain Rate >>>>> UV = UV Index >>>>> windDir = Wind Direction >>>>> windGust = Gust Speed >>>>> windGustDir = Gust Direction >>>>> windSpeed = Wind Speed >>>>> windchill = Wind Chill >>>>> windgustvec = Gust Vector >>>>> windvec = Wind Vector >>>>> extraTemp1 = Temperature1 >>>>> extraTemp2 = Temperature2 >>>>> extraTemp3 = Temperature3 >>>>> >>>>> # Sensor status indicators >>>>> >>>>> rxCheckPercent = Signal Quality >>>>> txBatteryStatus = Transmitter Battery >>>>> windBatteryStatus = Wind Battery >>>>> rainBatteryStatus = Rain Battery >>>>> outTempBatteryStatus = Outside Temperature Battery >>>>> inTempBatteryStatus = Inside Temperature Battery >>>>> consBatteryVoltage = Console Battery >>>>> heatingVoltage = Heating Battery >>>>> supplyVoltage = Supply Voltage >>>>> referenceVoltage = Reference Voltage >>>>> >>>>> [[[Almanac]]] >>>>> >>>>> # The labels to be used for the phases of the moon: >>>>> moon_phases = New, Waxing crescent, First quarter, Waxing >>>>> gibbous, Full, Waning gibbous, Last quarter, Waning crescent >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This service acts as a filter, converting the unit system coming >>>>> from >>>>> # the hardware to a unit system in the database. >>>>> >>>>> [StdConvert] >>>>> >>>>> # The target_unit affects only the unit system in the database. >>>>> Once >>>>> # chosen it cannot be changed without converting the entire >>>>> database. >>>>> # Modification of target_unit after starting weewx will result in >>>>> # corrupt data - the database will contain a mix of US and METRIC >>>>> data. >>>>> # >>>>> # The value of target_unit does not affect the unit system for >>>>> # reporting - reports can display US, Metric, or any combination >>>>> of units. >>>>> # >>>>> # In most cases, target_unit should be left as the default: US >>>>> # >>>>> # In particular, those migrating from a standard wview installation >>>>> # should use US since that is what the wview database contains. >>>>> >>>>> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! >>>>> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section can adjust data using calibration expressions. >>>>> >>>>> [StdCalibrate] >>>>> >>>>> [[Corrections]] >>>>> # For each type, an arbitrary calibration expression can be >>>>> given. >>>>> # It should be in the units defined in the StdConvert section. >>>>> # Example: >>>>> foo = foo + 0.2 >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section is for quality control checks. If units are not >>>>> specified, >>>>> # values must be in the units defined in the StdConvert section. >>>>> >>>>> [StdQC] >>>>> >>>>> [[MinMax]] >>>>> barometer = 26, 32.5, inHg >>>>> pressure = 24, 34.5, inHg >>>>> outTemp = -40, 120, degree_F >>>>> inTemp = 10, 120, degree_F >>>>> outHumidity = 0, 100 >>>>> inHumidity = 0, 100 >>>>> windSpeed = 0, 120, mile_per_hour >>>>> rain = 0, 10, inch >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section controls the origin of derived values. >>>>> >>>>> [StdWXCalculate] >>>>> >>>>> [[Calculations]] >>>>> # How to calculate derived quantities. Possible values are: >>>>> # hardware - use the value provided by hardware >>>>> # software - use the value calculated by weewx >>>>> # prefer_hardware - use value provide by hardware if >>>>> available, >>>>> # otherwise use value calculated by weewx >>>>> >>>>> pressure = prefer_hardware >>>>> barometer = prefer_hardware >>>>> altimeter = prefer_hardware >>>>> windchill = prefer_hardware >>>>> heatindex = prefer_hardware >>>>> dewpoint = prefer_hardware >>>>> inDewpoint = prefer_hardware >>>>> rainRate = prefer_hardware >>>>> maxSolarRad = prefer_hardware >>>>> cloudbase = prefer_hardware >>>>> humidex = prefer_hardware >>>>> appTemp = prefer_hardware >>>>> ET = prefer_hardware >>>>> windrun = prefer_hardware >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # For hardware that supports it, this section controls how often the >>>>> # onboard clock gets updated. >>>>> >>>>> [StdTimeSynch] >>>>> >>>>> # How often to check the weather station clock for drift (in >>>>> seconds) >>>>> clock_check = 14400 >>>>> >>>>> # How much it can drift before we will correct it (in seconds) >>>>> max_drift = 5 >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section is for configuring the archive service. >>>>> >>>>> [StdArchive] >>>>> >>>>> # If the station hardware supports data logging then the archive >>>>> interval >>>>> # will be downloaded from the station. Otherwise, specify it (in >>>>> seconds). >>>>> archive_interval = 300 >>>>> >>>>> # If possible, new archive records are downloaded from the station >>>>> # hardware. If the hardware does not support this, then new archive >>>>> # records will be generated in software. >>>>> # Set the following to "software" to force software record >>>>> generation. >>>>> record_generation = software >>>>> >>>>> # Whether to include LOOP data in hi/low statistics >>>>> loop_hilo = True >>>>> >>>>> # The data binding used to save archive records >>>>> data_binding = wx_binding >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section binds a data store to a database. >>>>> >>>>> [DataBindings] >>>>> >>>>> [[wx_binding]] >>>>> # The database must match one of the sections in [Databases]. >>>>> # This is likely to be the only option you would want to >>>>> change. >>>>> database = archive_sqlite >>>>> # The name of the table within the database >>>>> table_name = archive >>>>> # The manager handles aggregation of data for historical >>>>> summaries >>>>> manager = weewx.wxmanager.WXDaySummaryManager >>>>> # The schema defines the structure of the database. >>>>> # It is *only* used when the database is created. >>>>> schema = schemas.wview.schema >>>>> [[forecast_binding]] >>>>> database = forecast_sqlite >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section defines various databases. >>>>> >>>>> [Databases] >>>>> >>>>> # A SQLite database is simply a single file >>>>> [[archive_sqlite]] >>>>> database_name = weewx.sdb >>>>> database_type = SQLite >>>>> >>>>> # MySQL >>>>> [[archive_mysql]] >>>>> database_name = weewx >>>>> database_type = MySQL >>>>> [[forecast_sqlite]] >>>>> database_name = forecast.sdb >>>>> database_type = SQLite >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section defines defaults for the different types of databases. >>>>> >>>>> [DatabaseTypes] >>>>> >>>>> # Defaults for SQLite databases >>>>> [[SQLite]] >>>>> driver = weedb.sqlite >>>>> # Directory in which the database files are located >>>>> SQLITE_ROOT = /var/lib/weewx >>>>> >>>>> # Defaults for MySQL databases >>>>> [[MySQL]] >>>>> driver = weedb.mysql >>>>> # The host where the database is located >>>>> host = localhost >>>>> # The user name for logging in to the host >>>>> user = XXX obfuscated by wee_debug XXX >>>>> # The password for the user name (quotes guard against parsing >>>>> errors) >>>>> password = XXX obfuscated by wee_debug XXX >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section configures the internal weewx engine. >>>>> >>>>> [Engine] >>>>> # The following section specifies which services should be run and >>>>> in what order. >>>>> [[Services]] >>>>> prep_services = weewx.engine.StdTimeSynch >>>>> data_services = , >>>>> process_services = weewx.engine.StdConvert, >>>>> weewx.engine.StdCalibrate, weewx.engine.StdQC, >>>>> weewx.wxservices.StdWXCalculate >>>>> xtype_services = weewx.wxxtypes.StdWXXTypes, >>>>> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, >>>>> weewx.wxxtypes.StdDelta >>>>> archive_services = weewx.engine.StdArchive, >>>>> user.forecast.ZambrettiForecast, user.forecast.NWSForecast, >>>>> user.forecast.WUForecast, user.forecast.OWMForecast, >>>>> user.forecast.UKMOForecast, user.forecast.AerisForecast, >>>>> user.forecast.WWOForecast, user.forecast.DSForecast, >>>>> user.forecast.XTideForecast >>>>> restful_services = weewx.restx.StdStationRegistry, >>>>> weewx.restx.StdWunderground, weewx.restx.StdPWSweather, >>>>> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS, >>>>> user.mqtt.MQTT >>>>> report_services = weewx.engine.StdPrint, weewx.engine.StdReport >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # Options for extension 'forecast' >>>>> [Forecast] >>>>> data_binding = forecast_binding >>>>> [[OWM]] >>>>> api_key = XXX obfuscated by wee_debug XXX >>>>> [[WWO]] >>>>> api_key = XXX obfuscated by wee_debug XXX >>>>> [[WU]] >>>>> api_key = XXX obfuscated by wee_debug XXX >>>>> [[NWS]] >>>>> lid = ORZ006 >>>>> foid = PQR >>>>> [[UKMO]] >>>>> api_key = XXX obfuscated by wee_debug XXX >>>>> location = INSERT_UK_LOCATION_HERE >>>>> [[XTide]] >>>>> location = "INSERT_LOCATION_HERE (e.g., Boston)" >>>>> [[Zambretti]] >>>>> hemisphere = NORTH >>>>> [[Aeris]] >>>>> client_secret = INSERT_AERIS_CLIENT_SECRET_HERE >>>>> client_id = INSERT_AERIS_CLIENT_ID_HERE >>>>> [[DS]] >>>>> api_key = XXX obfuscated by wee_debug XXX >>>>> >>>>> wee_debug report successfully generated >>>>> >>>>> On Sun, Jan 3, 2021 at 7:31 PM gjr80 <[email protected]> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> That is interesting, you have debug = 1 but the detail that is >>>>>> showing in the log is less than there should be. Could you please post >>>>>> the >>>>>> output from wee_debug --info >>>>>> <http://weewx.com/docs/utilities.htm#wee_debug_utility>. Before >>>>>> posting the wee_debug output check to make sure there is no >>>>>> sensitive info in the output such as user names, passwords, api keys >>>>>> etc, >>>>>> wee_debug will obfuscate such info but it is not perfect. >>>>>> >>>>>> Gary >>>>>> >>>>>> On Monday, 4 January 2021 at 12:58:27 UTC+10 [email protected] wrote: >>>>>> >>>>>>> On my Seasons skins, for some reason the index.html file isn't >>>>>>> getting updated. I don't remember changing anything since the 1/1/21 >>>>>>> @ >>>>>>> 11:55pm timestamp of the last update. >>>>>>> >>>>>>> The Standard and Mobile versions are both updating correctly. >>>>>>> >>>>>>> http://wx.ke7k.com/ >>>>>>> >>>>>>> I changed debug = 1 and restarted.... >>>>>>> >>>>>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: Initializing >>>>>>> weewx version 4.2.0 >>>>>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: Using Python >>>>>>> 2.7.13 (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 20170516] >>>>>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: Platform >>>>>>> Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>>>>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: Locale is >>>>>>> 'en_US.UTF-8' >>>>>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: PID file is >>>>>>> /var/run/weewx.pid >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO __main__: Using >>>>>>> configuration file /etc/weewx/weewx.conf >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO __main__: Debug is 1 >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Loading >>>>>>> station type Vantage (weewx.drivers.vantage) >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: StdConvert >>>>>>> target unit is 0x1 >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Archive will >>>>>>> use data binding wx_binding >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Record >>>>>>> generation will be attempted in 'software' >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Using >>>>>>> archive interval of 300 seconds (software record generation) >>>>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: Zambretti: >>>>>>> forecast version 3.3.2 >>>>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: Zambretti: >>>>>>> interval=600 max_age=604800 winddir_period=1800 pressure_period=10800 >>>>>>> hemisphere=NORTH lower_pressure=950.0 upper_pressure=1050.0 >>>>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: NWS: forecast >>>>>>> version 3.3.2 >>>>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: NWS: >>>>>>> interval=10800 max_age=604800 lid=ORZ006 foid=PQR >>>>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: WU: forecast >>>>>>> version 3.3.2 >>>>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: OWM: forecast >>>>>>> version 3.3.2 >>>>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: UKMO: forecast >>>>>>> version 3.3.2 >>>>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: Aeris: >>>>>>> forecast version 3.3.2 >>>>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: WWO: forecast >>>>>>> version 3.3.2 >>>>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: DS: forecast >>>>>>> version 3.3.2 >>>>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: XTide: >>>>>>> forecast version 3.3.2 >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: >>>>>>> StationRegistry: Station will be registered. >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: Wunderground: >>>>>>> Posting not enabled. >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: PWSweather: >>>>>>> Posting not enabled. >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: CWOP: Posting >>>>>>> not enabled. >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: WOW: Posting >>>>>>> not enabled. >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: AWEKAS: >>>>>>> Posting not enabled. >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO user.mqtt: service version >>>>>>> is 0.23 >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO user.mqtt: binding to >>>>>>> archive >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO user.mqtt: topic is >>>>>>> corbett/weather >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO user.mqtt: data will be >>>>>>> uploaded to mqtt://127.0.0.1:1883 >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO __main__: Starting up >>>>>>> weewx version 4.2.0 >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Clock error >>>>>>> is 0.07 seconds (positive is fast) >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Using >>>>>>> binding 'wx_binding' to database 'weewx.sdb' >>>>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.manager: Starting >>>>>>> backfill of daily summaries >>>>>>> Jan 3 18:24:32 corbett weewx[18569] INFO weewx.engine: Starting >>>>>>> main packet loop. >>>>>>> Jan 3 18:25:14 corbett weewx[18569] INFO weewx.manager: Added >>>>>>> record 2021-01-03 18:25:00 PST (1609727100) to database 'weewx.sdb' >>>>>>> Jan 3 18:25:14 corbett weewx[18569] INFO weewx.manager: Added >>>>>>> record 2021-01-03 18:25:00 PST (1609727100) to daily summary in >>>>>>> 'weewx.sdb' >>>>>>> Jan 3 18:25:14 corbett weewxd: forecast: NWSThread: NWS: >>>>>>> downloading forecast from ' >>>>>>> http://forecast.weather.gov/product.php?site=NWS&product=PFM&format=txt&issuedby=PQR >>>>>>> ' >>>>>>> Jan 3 18:25:15 corbett weewx[18569] INFO weewx.restx: MQTT: >>>>>>> Published record 2021-01-03 18:25:00 PST (1609727100) >>>>>>> Jan 3 18:25:15 corbett weewx[18569] INFO weewx.restx: >>>>>>> StationRegistry: Published record 2021-01-03 18:25:00 PST (1609727100) >>>>>>> Jan 3 18:25:15 corbett weewxd: forecast: ZambrettiThread: >>>>>>> Zambretti: generated 1 forecast record >>>>>>> Jan 3 18:25:20 corbett weewx[18569] INFO weewx.cheetahgenerator: >>>>>>> Generated 7 files for report SeasonsReport in 5.29 seconds >>>>>>> Jan 3 18:25:20 corbett weewxd: forecast: NWSThread: NWS: got 40 >>>>>>> forecast records for Scappoose-Columbia OR 45.77N 122.86W Elev. 49 ft >>>>>>> Jan 3 18:25:21 corbett weewx[18569] INFO weewx.imagegenerator: >>>>>>> Generated 14 images for report SeasonsReport in 1.05 seconds >>>>>>> Jan 3 18:25:21 corbett weewx[18569] INFO weewx.reportengine: Copied >>>>>>> 87 files to /var/www/html/weewx >>>>>>> Jan 3 18:25:21 corbett weewx[18569] INFO weewx.cheetahgenerator: >>>>>>> Generated 6 files for report SmartphoneReport in 0.35 seconds >>>>>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.imagegenerator: >>>>>>> Generated 6 images for report SmartphoneReport in 0.38 seconds >>>>>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.reportengine: Copied >>>>>>> 6 files to /var/www/html/weewx/smart/ >>>>>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.cheetahgenerator: >>>>>>> Generated 1 files for report MobileReport in 0.11 seconds >>>>>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.imagegenerator: >>>>>>> Generated 4 images for report MobileReport in 0.26 seconds >>>>>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.reportengine: Copied >>>>>>> 2 files to /var/www/html/weewx/mobile/ >>>>>>> Jan 3 18:25:26 corbett weewx[18569] INFO weewx.cheetahgenerator: >>>>>>> Generated 14 files for report StandardReport in 3.95 seconds >>>>>>> Jan 3 18:25:27 corbett weewx[18569] INFO weewx.imagegenerator: >>>>>>> Generated 12 images for report StandardReport in 0.80 seconds >>>>>>> Jan 3 18:25:27 corbett weewx[18569] INFO weewx.reportengine: Copied >>>>>>> 14 files to /var/www/html/weewx/standard >>>>>>> >>>>>>> >>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/abfd3be6-b829-4b40-98c4-751dcc0cf047n%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/weewx-user/abfd3be6-b829-4b40-98c4-751dcc0cf047n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/85887876-1b16-4c71-a060-e203b54b3f15n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/85887876-1b16-4c71-a060-e203b54b3f15n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/82a2dc38-e1da-4d32-9a4d-2a610a454355n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/82a2dc38-e1da-4d32-9a4d-2a610a454355n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/dd835f87-21b3-40f0-ab98-71959050090fn%40googlegroups.com.
