I finally received my GW1000 last night. Got it powered up and connected to my network but I'm having some difficulty configuring the sensors.
The sensor ID page seems to have all sensors enabled and I only have the inside sensor (THP) and one TH sensor deployed so far. I tried looking at the sensor ID page from the WS-2000 console and manually pick the channels detected on that screen but not sure if the GW1000 is picking them up or not. I still need to get the GW1000 on a USB extension. I have it plugged into a banana pi m1 USB port right now for power. (I plan to install weewx on the banana pi m1 soon...need a few more pieces of hardware before I can finish getting that set up) Hopefully when I get the GW1000 on a USB extension cable it will be able to pick up the sensors. Or I may have to find a different power source / location for it. On Mon, Jan 4, 2021, 10:25 AM Bill Arthur <[email protected]> wrote: > I use a three foot USB extension cord on the GW1000. I had one instance > where the phone-charger-type power supply generated enough trash to hamper > the GW1000 reception. > > On Monday, January 4, 2021 at 11:07:30 AM UTC-6 [email protected] > wrote: > >> Correct, for power only. You can use any phone charger, USB hub etc. to >> keep it running. Even plug it into a USB port of a Raspberry Pi if you have >> one ... >> A good idea will be to have the power source connected to a UPS, as well >> as your weather computer :-), or have it connected to a power-bank which >> you keep on charging - many possibilities. >> On 04.01.2021 17:38, George Morgan wrote: >> >> Well I ordered a GW1000. Now I'm thinking about how to power it. The >> USB connector is only used for power, right? >> >> On Sun, Jan 3, 2021, 7:52 PM galfert <[email protected]> wrote: >> >>> I meant to say water leak ....not water lead sensor. >>> >>> >>> On Sunday, January 3, 2021 at 10:51:34 PM UTC-5 galfert wrote: >>> >>>> The WS-2000 does not support more sensors than the GW1000. Its the >>>> other way around. The GW1000 supports every single sensor that the WS-2000 >>>> support, plus it supports sensors from Ecowitt that Ambient doesn't sell, >>>> WH32-EP, WH31-EP, WH45 to name a few, and Ecowitt is working on some >>>> sensors that they will have before Ambient gets them (new soil moisture >>>> with temperature). The GW1000 also had support for water lead and lightning >>>> many months before the WS-2000. >>>> >>>> >>>> >>>> On Sunday, January 3, 2021 at 8:42:57 PM UTC-5 [email protected] wrote: >>>> >>>>> Thanks for the link to the chart...I need to look at it closer but I >>>>> think my WS-2000 supports more sensors than the GW1000 so I may be looking >>>>> at integrating FOSHK plug-in into weewx directly...unless I'm missing >>>>> something... >>>>> >>>>> I also need to look at the license for FOSHK plug-in as that may make >>>>> this impossible (legally, that is) >>>>> >>>>> On Sat, Jan 2, 2021, 12:40 PM Rainer Lang <[email protected]> wrote: >>>>> >>>>>> It works with all Ambient Weather sensors which are clones of Fine >>>>>> Offset sensors. >>>>>> >>>>>> (Ambient also sells non-Fine Offset clone sensors and weather >>>>>> stations) >>>>>> >>>>>> What sensors these are, you can see at >>>>>> >>>>>> https://www.wxforum.net/index.php?topic=40730.0 >>>>>> >>>>>> >>>>>> On 02.01.2021 21:34, George Morgan wrote: >>>>>> >>>>>> Does the GW1000 work with all the AW sensors? >>>>>> >>>>>> On Sat, Jan 2, 2021, 11:41 AM galfert <[email protected]> wrote: >>>>>> >>>>>>> Well there is a way to get from WS-2000 AW protocol to WeeWX...but >>>>>>> you need a translator. You can use FOSHKplugin and that will convert AW >>>>>>> protocol to Ecowitt protocol and then you can use the WeeWX Interceptor >>>>>>> driver. >>>>>>> >>>>>>> >>>>>>> On Saturday, January 2, 2021 at 2:17:39 PM UTC-5 [email protected] >>>>>>> wrote: >>>>>>> >>>>>>>> Is there an effort to support the AW protocol for the WS-2000 >>>>>>>> server? As a developer I would be interested in working on this if it >>>>>>>> is >>>>>>>> documented (and maybe even if it is not). My WS-2000 has the latest >>>>>>>> wifi >>>>>>>> and base firmware installed. >>>>>>>> >>>>>>>> I will also look into the GW-1000 and RTL SDR options. >>>>>>>> >>>>>>>> On Sat, Jan 2, 2021, 9:58 AM galfert <[email protected]> wrote: >>>>>>>> >>>>>>>>> The best way is to buy the GW1000 and then it will pick up al your >>>>>>>>> WS-2000 sensors. Then you install WeeWX with the GW1000 API driver. >>>>>>>>> https://github.com/gjr80/weewx-gw1000 >>>>>>>>> >>>>>>>>> There is not telnet with the WS-2000. The Interceptor driver will >>>>>>>>> not pick up all your sensors....if you have added optional sensors. >>>>>>>>> Besides >>>>>>>>> with the WS-2000 it is too convoluted to get the Interceptor working >>>>>>>>> because there is no "Customized" server option with the supported >>>>>>>>> protocol >>>>>>>>> for the Interceptor driver. The WS-2000 newly gained "Customized" >>>>>>>>> server >>>>>>>>> upload option but it is Ambient protocol which is different than what >>>>>>>>> the >>>>>>>>> Interceptor expects. >>>>>>>>> >>>>>>>>> >>>>>>>>> On Saturday, January 2, 2021 at 10:29:32 AM UTC-5 [email protected] >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Hi All, >>>>>>>>>> >>>>>>>>>> I received a weather station for Christmas and realized really >>>>>>>>>> quickly that I want / need something like weewx to make it much more >>>>>>>>>> capable. >>>>>>>>>> >>>>>>>>>> I saw in the list archives that others are using weewx with the >>>>>>>>>> WS-2000, intercepting WU data. Is there another method where weewx >>>>>>>>>> polls >>>>>>>>>> the WS-2000 or receives data directly from the WS-2000? I noticed >>>>>>>>>> the >>>>>>>>>> telnet protocol info on the AW website but haven't figured out which >>>>>>>>>> port >>>>>>>>>> the WS-2000 is using for this communication? If I am barking up the >>>>>>>>>> wrong >>>>>>>>>> tree, please let me know. >>>>>>>>>> >>>>>>>>>> BTW, I have a background in computer networking, software >>>>>>>>>> development (day job), system administration (day job), and have >>>>>>>>>> been doing >>>>>>>>>> automation for many years. >>>>>>>>>> >>>>>>>>>> Please let me know if this is a more appropriate question for the >>>>>>>>>> dev list. >>>>>>>>>> >>>>>>>>>> Happy New Year! >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/a4f2febd-177e-4160-aef2-23d0f3a064d3n%40googlegroups.com >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/a4f2febd-177e-4160-aef2-23d0f3a064d3n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/26ac7b65-73ef-4991-856e-7e3b979d3e9bn%40googlegroups.com >>>>>>> <https://groups.google.com/d/msgid/weewx-user/26ac7b65-73ef-4991-856e-7e3b979d3e9bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/CAJ%2B0VHzg5APMmRJnbV6ubLfG%3DvpJFWsk9vwLwR%3DrfAz0-V0Lrg%40mail.gmail.com >>>>>> <https://groups.google.com/d/msgid/weewx-user/CAJ%2B0VHzg5APMmRJnbV6ubLfG%3DvpJFWsk9vwLwR%3DrfAz0-V0Lrg%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/a19d5b76-15de-4b03-aa72-0d23f425ee72n%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/a19d5b76-15de-4b03-aa72-0d23f425ee72n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/CAJ%2B0VHzgtzuVEjK9NidP1v3Ejh84xfzoX%2Btrf7Q65jMd3d%2B2xQ%40mail.gmail.com >> <https://groups.google.com/d/msgid/weewx-user/CAJ%2B0VHzgtzuVEjK9NidP1v3Ejh84xfzoX%2Btrf7Q65jMd3d%2B2xQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> >> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/9d5ae0c9-8394-4852-8b20-996b16f53c27n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/9d5ae0c9-8394-4852-8b20-996b16f53c27n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAJ%2B0VHw7JbydmDkfLuLQQ0yghcY7PLTuri3mR3SMnA%2BAOZG%3DQA%40mail.gmail.com.
