Yes, I used ws view on Android from the Play Store. After a little while the app asked if I wanted to update the firmware to 1.6.3 and I did. That seemed to work fine.
The GW1000 is joined to my network but I don't think it is picking up any sensors yet. On Sun, Jan 10, 2021, 11:16 PM Bill Arthur <[email protected]> wrote: > The GW1000 is configured with the WS View app. Are you using it? > > On Monday, January 11, 2021 at 12:54:01 AM UTC-6 [email protected] wrote: > >> I finally received my GW1000 last night. Got it powered up and connected >> to my network but I'm having some difficulty configuring the sensors. >> >> The sensor ID page seems to have all sensors enabled and I only have the >> inside sensor (THP) and one TH sensor deployed so far. I tried looking at >> the sensor ID page from the WS-2000 console and manually pick the channels >> detected on that screen but not sure if the GW1000 is picking them up or >> not. I still need to get the GW1000 on a USB extension. I have it plugged >> into a banana pi m1 USB port right now for power. (I plan to install weewx >> on the banana pi m1 soon...need a few more pieces of hardware before I can >> finish getting that set up) >> >> Hopefully when I get the GW1000 on a USB extension cable it will be able >> to pick up the sensors. Or I may have to find a different power source / >> location for it. >> >> On Mon, Jan 4, 2021, 10:25 AM Bill Arthur <[email protected]> wrote: >> >>> I use a three foot USB extension cord on the GW1000. I had one instance >>> where the phone-charger-type power supply generated enough trash to hamper >>> the GW1000 reception. >>> >>> On Monday, January 4, 2021 at 11:07:30 AM UTC-6 [email protected] >>> wrote: >>> >>>> Correct, for power only. You can use any phone charger, USB hub etc. to >>>> keep it running. Even plug it into a USB port of a Raspberry Pi if you have >>>> one ... >>>> A good idea will be to have the power source connected to a UPS, as >>>> well as your weather computer :-), or have it connected to a power-bank >>>> which you keep on charging - many possibilities. >>>> On 04.01.2021 17:38, George Morgan wrote: >>>> >>>> Well I ordered a GW1000. Now I'm thinking about how to power it. The >>>> USB connector is only used for power, right? >>>> >>>> On Sun, Jan 3, 2021, 7:52 PM galfert <[email protected]> wrote: >>>> >>>>> I meant to say water leak ....not water lead sensor. >>>>> >>>>> >>>>> On Sunday, January 3, 2021 at 10:51:34 PM UTC-5 galfert wrote: >>>>> >>>>>> The WS-2000 does not support more sensors than the GW1000. Its the >>>>>> other way around. The GW1000 supports every single sensor that the >>>>>> WS-2000 >>>>>> support, plus it supports sensors from Ecowitt that Ambient doesn't sell, >>>>>> WH32-EP, WH31-EP, WH45 to name a few, and Ecowitt is working on some >>>>>> sensors that they will have before Ambient gets them (new soil moisture >>>>>> with temperature). The GW1000 also had support for water lead and >>>>>> lightning >>>>>> many months before the WS-2000. >>>>>> >>>>>> >>>>>> >>>>>> On Sunday, January 3, 2021 at 8:42:57 PM UTC-5 [email protected] >>>>>> wrote: >>>>>> >>>>>>> Thanks for the link to the chart...I need to look at it closer but I >>>>>>> think my WS-2000 supports more sensors than the GW1000 so I may be >>>>>>> looking >>>>>>> at integrating FOSHK plug-in into weewx directly...unless I'm missing >>>>>>> something... >>>>>>> >>>>>>> I also need to look at the license for FOSHK plug-in as that may >>>>>>> make this impossible (legally, that is) >>>>>>> >>>>>>> On Sat, Jan 2, 2021, 12:40 PM Rainer Lang <[email protected]> >>>>>>> wrote: >>>>>>> >>>>>>>> It works with all Ambient Weather sensors which are clones of Fine >>>>>>>> Offset sensors. >>>>>>>> >>>>>>>> (Ambient also sells non-Fine Offset clone sensors and weather >>>>>>>> stations) >>>>>>>> >>>>>>>> What sensors these are, you can see at >>>>>>>> >>>>>>>> https://www.wxforum.net/index.php?topic=40730.0 >>>>>>>> >>>>>>>> >>>>>>>> On 02.01.2021 21:34, George Morgan wrote: >>>>>>>> >>>>>>>> Does the GW1000 work with all the AW sensors? >>>>>>>> >>>>>>>> On Sat, Jan 2, 2021, 11:41 AM galfert <[email protected]> wrote: >>>>>>>> >>>>>>>>> Well there is a way to get from WS-2000 AW protocol to WeeWX...but >>>>>>>>> you need a translator. You can use FOSHKplugin and that will convert >>>>>>>>> AW >>>>>>>>> protocol to Ecowitt protocol and then you can use the WeeWX >>>>>>>>> Interceptor >>>>>>>>> driver. >>>>>>>>> >>>>>>>>> >>>>>>>>> On Saturday, January 2, 2021 at 2:17:39 PM UTC-5 [email protected] >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Is there an effort to support the AW protocol for the WS-2000 >>>>>>>>>> server? As a developer I would be interested in working on this if >>>>>>>>>> it is >>>>>>>>>> documented (and maybe even if it is not). My WS-2000 has the latest >>>>>>>>>> wifi >>>>>>>>>> and base firmware installed. >>>>>>>>>> >>>>>>>>>> I will also look into the GW-1000 and RTL SDR options. >>>>>>>>>> >>>>>>>>>> On Sat, Jan 2, 2021, 9:58 AM galfert <[email protected]> wrote: >>>>>>>>>> >>>>>>>>>>> The best way is to buy the GW1000 and then it will pick up al >>>>>>>>>>> your WS-2000 sensors. Then you install WeeWX with the GW1000 API >>>>>>>>>>> driver. >>>>>>>>>>> https://github.com/gjr80/weewx-gw1000 >>>>>>>>>>> >>>>>>>>>>> There is not telnet with the WS-2000. The Interceptor driver >>>>>>>>>>> will not pick up all your sensors....if you have added optional >>>>>>>>>>> sensors. >>>>>>>>>>> Besides with the WS-2000 it is too convoluted to get the Interceptor >>>>>>>>>>> working because there is no "Customized" server option with the >>>>>>>>>>> supported >>>>>>>>>>> protocol for the Interceptor driver. The WS-2000 newly gained >>>>>>>>>>> "Customized" >>>>>>>>>>> server upload option but it is Ambient protocol which is different >>>>>>>>>>> than >>>>>>>>>>> what the Interceptor expects. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Saturday, January 2, 2021 at 10:29:32 AM UTC-5 >>>>>>>>>>> [email protected] wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi All, >>>>>>>>>>>> >>>>>>>>>>>> I received a weather station for Christmas and realized really >>>>>>>>>>>> quickly that I want / need something like weewx to make it much >>>>>>>>>>>> more >>>>>>>>>>>> capable. >>>>>>>>>>>> >>>>>>>>>>>> I saw in the list archives that others are using weewx with the >>>>>>>>>>>> WS-2000, intercepting WU data. Is there another method where >>>>>>>>>>>> weewx polls >>>>>>>>>>>> the WS-2000 or receives data directly from the WS-2000? I noticed >>>>>>>>>>>> the >>>>>>>>>>>> telnet protocol info on the AW website but haven't figured out >>>>>>>>>>>> which port >>>>>>>>>>>> the WS-2000 is using for this communication? If I am barking up >>>>>>>>>>>> the wrong >>>>>>>>>>>> tree, please let me know. >>>>>>>>>>>> >>>>>>>>>>>> BTW, I have a background in computer networking, software >>>>>>>>>>>> development (day job), system administration (day job), and have >>>>>>>>>>>> been doing >>>>>>>>>>>> automation for many years. >>>>>>>>>>>> >>>>>>>>>>>> Please let me know if this is a more appropriate question for >>>>>>>>>>>> the dev list. >>>>>>>>>>>> >>>>>>>>>>>> Happy New Year! >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/a4f2febd-177e-4160-aef2-23d0f3a064d3n%40googlegroups.com >>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/a4f2febd-177e-4160-aef2-23d0f3a064d3n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/26ac7b65-73ef-4991-856e-7e3b979d3e9bn%40googlegroups.com >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/26ac7b65-73ef-4991-856e-7e3b979d3e9bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/CAJ%2B0VHzg5APMmRJnbV6ubLfG%3DvpJFWsk9vwLwR%3DrfAz0-V0Lrg%40mail.gmail.com >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/CAJ%2B0VHzg5APMmRJnbV6ubLfG%3DvpJFWsk9vwLwR%3DrfAz0-V0Lrg%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/a19d5b76-15de-4b03-aa72-0d23f425ee72n%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/weewx-user/a19d5b76-15de-4b03-aa72-0d23f425ee72n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/CAJ%2B0VHzgtzuVEjK9NidP1v3Ejh84xfzoX%2Btrf7Q65jMd3d%2B2xQ%40mail.gmail.com >>>> <https://groups.google.com/d/msgid/weewx-user/CAJ%2B0VHzgtzuVEjK9NidP1v3Ejh84xfzoX%2Btrf7Q65jMd3d%2B2xQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/9d5ae0c9-8394-4852-8b20-996b16f53c27n%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/9d5ae0c9-8394-4852-8b20-996b16f53c27n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/e2a358c0-c5e6-4fbb-acc6-8a2716419fb2n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/e2a358c0-c5e6-4fbb-acc6-8a2716419fb2n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAJ%2B0VHyf1XkNfV%2B4zRhZ_S64ZEk9JpZzBjqJ3py8onah1xX_7g%40mail.gmail.com.
