OK, starting un-mapped and clean. I've commented out the field mapping
as it wasn't working before I tried the field mapping. Here's what weewx
shows when run directly, a LOOP, a REC and a LOOP:
LOOP: 2021-01-20 13:50:23 AEDT (1611111023) altimeter:
30.214931325260572, dateTime: 1611111023, daymaxwind: 6.1, dayRain: 0.0,
extraHumid1: 44, extraTemp1: 71.42, inDewpoint: 49.92640514397384,
inHumidity: 34, inTemp: 80.96000000000001, lightning_distance: None,
lightning_last_det_time: None, lightning_strike_count: 0, luminosity:
115940.0, maxSolarRad: 1061.283312378295, monthRain: 0.2362204724409449,
pm2_5: 9.0, pm2_51_24h_avg: 10.6, pm2_52: 7.0, pm2_52_24h_avg: 6.3,
pressure: 30.1264932475, rain: 0.0, rainRate: 0.0, relbarometer: 1020.2,
soilMoist1: 38, soilMoist2: 38, soilMoist3: 38, soilMoist4: 36,
stormRain: 0.0, usUnits: 1, UV: 8, uvradiation: 313.8, weekRain: 0.2,
wh31_ch1_batt: 0, wh31_ch1_sig: 4, wh40_batt: 0, wh40_sig: 4,
wh41_ch1_batt: 4, wh41_ch1_sig: 4, wh41_ch2_batt: 3, wh41_ch2_sig: 4,
wh51_ch1_batt: 0, wh51_ch1_sig: 4, wh51_ch2_batt: 0, wh51_ch2_sig: 4,
wh51_ch3_batt: 0, wh51_ch3_sig: 4, wh51_ch4_batt: 0, wh51_ch4_sig: 4,
wh57_batt: 4, wh57_sig: 4, wh68_batt: 1.56, wh68_sig: 4, windDir: 355,
windGust: 5.816048815042191, windSpeed: 4.697577889072539, yearRain:
0.2362204724409449
REC: 2021-01-20 13:50:00 AEDT (1611111000) altimeter:
30.214931325260572, dateTime: 1611111000, daymaxwind: 6.1, dayRain: 0.0,
ET: None, extraHumid1: 43.0, extraTemp1: 71.42, inDewpoint:
49.92640514397384, inHumidity: 34.0, inTemp: 80.96000000000001,
interval: 5.0, lightning_distance: None, lightning_last_det_time: None,
lightning_strike_count: 0.0, luminosity: 116090.0, maxSolarRad:
1061.4627989986568, monthRain: 0.2362204724409449, pm2_5: 9.0,
pm2_51_24h_avg: 10.6, pm2_52: 7.0, pm2_52_24h_avg: 6.3, pressure:
30.1264932475, rain: 0.0, rainRate: 0.0, relbarometer: 1020.2,
soilMoist1: 38.0, soilMoist2: 38.0, soilMoist3: 38.0, soilMoist4: 36.0,
stormRain: 0.0, usUnits: 1, UV: 8.0, uvradiation: 313.8, weekRain: 0.2,
wh31_ch1_batt: 0, wh31_ch1_sig: 4, wh40_batt: 0, wh40_sig: 4,
wh41_ch1_batt: 4, wh41_ch1_sig: 4, wh41_ch2_batt: 3, wh41_ch2_sig: 4,
wh51_ch1_batt: 0, wh51_ch1_sig: 4, wh51_ch2_batt: 0, wh51_ch2_sig: 4,
wh51_ch3_batt: 0, wh51_ch3_sig: 4, wh51_ch4_batt: 0, wh51_ch4_sig: 4,
wh57_batt: 4, wh57_sig: 4, wh68_batt: 1.56, wh68_sig: 4, windDir: 15.0,
windGust: 4.473883703878609, windGustDir: 15, windrun:
0.3169000956914015, windSpeed: 3.8028011482968176, yearRain:
0.2362204724409449
LOOP: 2021-01-20 13:50:53 AEDT (1611111053) altimeter:
30.211971180044973, dateTime: 1611111053, daymaxwind: 6.1, dayRain: 0.0,
extraHumid1: 44, extraTemp1: 71.42, inDewpoint: 50.0837333345728,
inHumidity: 34, inTemp: 81.14, lightning_distance: None,
lightning_last_det_time: None, lightning_strike_count: 0, luminosity:
116090.0, maxSolarRad: 1061.0988940654713, monthRain:
0.2362204724409449, pm2_5: 9.0, pm2_51_24h_avg: 10.6, pm2_52: 7.0,
pm2_52_24h_avg: 6.3, pressure: 30.12354024875, rain: 0.0, rainRate: 0.0,
relbarometer: 1020.1, soilMoist1: 38, soilMoist2: 38, soilMoist3: 38,
soilMoist4: 36, stormRain: 0.0, usUnits: 1, UV: 8, uvradiation: 313.8,
weekRain: 0.2, wh31_ch1_batt: 0, wh31_ch1_sig: 4, wh40_batt: 0,
wh40_sig: 4, wh41_ch1_batt: 4, wh41_ch1_sig: 4, wh41_ch2_batt: 3,
wh41_ch2_sig: 4, wh51_ch1_batt: 0, wh51_ch1_sig: 4, wh51_ch2_batt: 0,
wh51_ch2_sig: 4, wh51_ch3_batt: 0, wh51_ch3_sig: 4, wh51_ch4_batt: 0,
wh51_ch4_sig: 4, wh57_batt: 4, wh57_sig: 4, wh68_batt: 1.56, wh68_sig:
4, windDir: 354, windGust: 6.934519741011844, windSpeed:
4.92127207426647, yearRain: 0.2362204724409449
Still, the Seasons Report shows no data for Outside Temp or Humidity.
On 20/01/2021 13:13, gjr80 wrote:
From what you have posted I do not see anything wrong. —live-data
displays all of the sensor data straight from the GW1000 so no mapping
(that is why you see temp1, humid1 etc and not WeeWX field names). If
you want to see the results post mapping (ie what the driver sends to
WeeWX) you need to run WeeWX directly
<http://weewx.com/docs/usersguide.htm#Running_directly> or run the
driver directly with —test-driver command line option.
When you say you are ‘not seeing Outside Temp, Outside Humidity’ do
you mean WeeWX fields outTemp and outHumidity are not being populated
and you want them populated? If so you need to remove the extraTemp1
and extraHumid1 mappings as they are taking the data that is normally
mapped to outTemp and outHumidity (you can only map a field once in
the driver). With the mapping you have now outside temperature and
outside humidity are being mapped to WeeWX fields extraTemp1
and extraHumid1. If you run WeeWX directly you will see this.
It’s possible the lack of outTemp is preventing WeeWX from calculating
one of the pressure fields, would need to see the results of running
WeeWX directly to comment further.
Gary
On Wednesday, 20 January 2021 at 11:51:07 UTC+10 [email protected]
wrote:
Good day every one. I know that there have been many threads on
this but I can not get my install to work at all. Well, actually,
it's mostly working. Website is publicly access able at
https://wendywx.myndworx.com.au <https://wendywx.myndworx.com.au>.
My issue is that I am not seeing Outside Temp, Outside Humidity or
Barometric Pressure. I've set up the GW1000 using the WS View
Android App and everything shows up there (Other than the
defective WH55, which is being replaced) and I've set it up to
send data to www.ecowitt.net <http://www.ecowitt.net> and all
readings show up there.
Here's the specs"
1. Raspberry Pi 4B Latest OS (Buster) Fresh and clean install
2. Booting from a 64GB M.2 SSD drive
3. Apache and PHP installed
4. WeeWX v4.3.0 fresh installed
5. GW1000 v0.2.0 installed
6. List of sensors
1. GW1000 PWS Gateway
2. WH31 Multi-Channel Temperature and humidity Sensor
3. WH40 Wireless Self-Emptying Rain Collector Rainfall Sensor
4. WH41 PM2.5 Air Quality Sensor Monitor Outdoor
5. WH43 PM2.5 Air Quality Sensor for Indoor Use
6. WH51 Wireless Soil Moisture Sensor Max 8 Channels Soil
Humidity Tester (x4)
7. WH55 Wireless Water Leak Detection Sensor with Loud Audio
Alarm
8. WH57 Wireless Lightning Detection Sensor with Email Alert
9. WS68 Wireless Solar Powered Anemometer with Light & UV Sensor
Live data from the GW1000 via the --live-data parameter
/pi@wendywx:~ $ sudo PYTHONPATH=/usr/share/weewx python3 -m
user.gw1000 --live-data
Using configuration file /etc/weewx/weewx.conf
Interrogating GW1000 at 192.168.0.107:45000
<http://192.168.0.107:45000>
GW1000 live sensor data: absbarometer: 1021.5, datetime:
1611105772, daymaxwind: 6.1, gustspeed: 1.5, humid1: 45, inhumid:
35, intemp: 26.6, light: 110510.0, lightningcount: 0,
lightningdettime: None, lightningdist: None, pm251: 10.0,
pm251_24h_avg: 11.0, pm252: 8.0, pm252_24h_avg: 6.1, rainday: 0.0,
rainevent: 0.0, rainmonth: 6.0, rainrate: 0.0, rainweek: 0.2,
rainyear: 6.0, relbarometer: 1021.5, soilmoist1: 39, soilmoist2:
39, soilmoist3: 39, soilmoist4: 37, temp1: 21.0, uv: 313.8, uvi:
8, wh31_ch1_batt: 0, wh31_ch1_sig: 4, wh40_batt: 0, wh40_sig: 4,
wh41_ch1_batt: 5, wh41_ch1_sig: 4, wh41_ch2_batt: 3, wh41_ch2_sig:
4, wh51_ch1_batt: 0, wh51_ch1_sig: 4, wh51_ch2_batt: 0,
wh51_ch2_sig: 4, wh51_ch3_batt: 0, wh51_ch3_sig: 4, wh51_ch4_batt:
0, wh51_ch4_sig: 4, wh57_batt: 4, wh57_sig: 4, wh68_batt: 1.56,
wh68_sig: 4, winddir: 355, windspeed: 1.3/
/
/
I've tried the following in weewx.conf
/##############################################################################
[GW1000]
# This section is for the GW1000 API driver.
# How often to poll the GW1000 API, default is every 20 seconds:
poll_interval = 30
# The driver to use:
driver = user.gw1000
ip_address = 192.168.0.107
port = 45000
[[field_map_extensions]]
#--- the defaults map inTemp, inHumidity
# outTemp
extraTemp1 = temp1
# outHumidity
extraHumid1 = humid1
##############################################################################/
/
/
But that's not working so I'm sure I'm doing that wrong. I'd like
to get the weather34 skin operational, but can go any farther till
I get the baseline working so I'm hoping that someone here can
lend a helping hand and lead me out of the darkness.
Thanks for the assist mate.
--
You received this message because you are subscribed to a topic in the
Google Groups "weewx-user" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/weewx-user/5crj5Jg_b_0/unsubscribe
<https://groups.google.com/d/topic/weewx-user/5crj5Jg_b_0/unsubscribe>.
To unsubscribe from this group and all its topics, send an email to
[email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/400dda98-86cc-46cb-8abd-06c78b8f3cd2n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/400dda98-86cc-46cb-8abd-06c78b8f3cd2n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/f1f6a2c2-02dc-9af0-3242-6a1130b7d64d%40gmail.com.
