No worries mate.
I've added the Field Map Extension stanza as you wrote it and here's
what WeeWX is showing now.
LOOP: 2021-01-20 18:05:42 AEDT (1611126342) altimeter:
30.143887807128014, appTemp: 73.64474084003541, barometer:
30.138999904876254, cloudbase: 3863.5213972385827, dateTime: 1611126342,
daymaxwind: 8.7, dayRain: 0.0, dewpoint: 56.566963406178594, heatindex:
72.87400000000001, humidex: 78.91044937032157, inDewpoint:
55.02112432622511, inHumidity: 52, inTemp: 73.75999999999999,
lightning_distance: None, lightning_last_det_time: None,
lightning_strike_count: 0, luminosity: 52540.0, maxSolarRad:
430.78504964077194, monthRain: 0.2362204724409449, outHumidity: 56,
outTemp: 73.22, pm2_5: 13.0, pm2_51_24h_avg: 9.3, pm2_52: 7.0,
pm2_52_24h_avg: 6.9, pressure: 30.0556212775, rain: 0.0, rainRate: 0.0,
relbarometer: 1017.8, soilMoist1: 36, soilMoist2: 37, soilMoist3: 37,
soilMoist4: 35, stormRain: 0.0, usUnits: 1, UV: 4, uvradiation: 140.0,
weekRain: 0.2, wh31_ch1_batt: 0, wh31_ch1_sig: 4, wh40_batt: 0,
wh40_sig: 4, wh41_ch1_batt: 4, wh41_ch1_sig: 4, wh41_ch2_batt: 3,
wh41_ch2_sig: 4, wh51_ch1_batt: 0, wh51_ch1_sig: 4, wh51_ch2_batt: 0,
wh51_ch2_sig: 4, wh51_ch3_batt: 0, wh51_ch3_sig: 4, wh51_ch4_batt: 0,
wh51_ch4_sig: 4, wh57_batt: 4, wh57_sig: 4, wh68_batt: 1.56, wh68_sig:
4, windchill: 73.22, windDir: 352, windGust: 4.473883703878609,
windSpeed: 2.9080244075210957, yearRain: 0.2362204724409449
REC: 2021-01-20 18:05:00 AEDT (1611126300) altimeter:
30.14177341564022, appTemp: 70.99912262862394, barometer:
30.136872688919674, cloudbase: 3945.9957528208333, dateTime: 1611126300,
daymaxwind: 8.7, dayRain: 0.0, dewpoint: 56.28121909875954, ET: None,
heatindex: 72.92528571428572, humidex: 78.82493358748115, inDewpoint:
55.42406167682481, inHumidity: 52.0, inTemp: 74.19714285714288,
interval: 5.0, lightning_distance: None, lightning_last_det_time: None,
lightning_strike_count: 0.0, luminosity: 52940.0, maxSolarRad:
440.59787025988487, monthRain: 0.2362204724409449, outHumidity:
55.285714285714285, outTemp: 73.29714285714286, pm2_5: 13.0,
pm2_51_24h_avg: 9.3, pm2_52: 7.0, pm2_52_24h_avg: 6.9, pressure:
30.05351199267857, rain: 0.0, rainRate: 0.0, relbarometer:
1017.7285714285714, soilMoist1: 36.0, soilMoist2: 37.0, soilMoist3:
37.0, soilMoist4: 35.0, stormRain: 0.0, usUnits: 1, UV: 4.0,
uvradiation: 140.0, weekRain: 0.2, wh31_ch1_batt: 0, wh31_ch1_sig: 4,
wh40_batt: 0, wh40_sig: 4, wh41_ch1_batt: 4, wh41_ch1_sig: 4,
wh41_ch2_batt: 3, wh41_ch2_sig: 4, wh51_ch1_batt: 0, wh51_ch1_sig: 4,
wh51_ch2_batt: 0, wh51_ch2_sig: 4, wh51_ch3_batt: 0, wh51_ch3_sig: 4,
wh51_ch4_batt: 0, wh51_ch4_sig: 4, wh57_batt: 4, wh57_sig: 4, wh68_batt:
1.56, wh68_sig: 4, windchill: 73.29714285714286, windDir:
356.51752627247083, windGust: 13.645345296829756, windGustDir: 11,
windrun: 0.6311371653685894, windSpeed: 7.573645984423074, yearRain:
0.2362204724409449
LOOP: 2021-01-20 18:06:12 AEDT (1611126372) altimeter:
30.143887807128014, appTemp: 73.01474084003542, barometer:
30.138999904876254, cloudbase: 3863.5213972385827, dateTime: 1611126372,
daymaxwind: 8.7, dayRain: 0.0, dewpoint: 56.566963406178594, heatindex:
72.87400000000001, humidex: 78.91044937032157, inDewpoint:
55.187043586728066, inHumidity: 52, inTemp: 73.94, lightning_distance:
None, lightning_last_det_time: None, lightning_strike_count: 0,
luminosity: 52390.0, maxSolarRad: 428.83289169740937, monthRain:
0.2362204724409449, outHumidity: 56, outTemp: 73.22, pm2_5: 10.0,
pm2_51_24h_avg: 9.3, pm2_52: 7.0, pm2_52_24h_avg: 6.9, pressure:
30.0556212775, rain: 0.0, rainRate: 0.0, relbarometer: 1017.8,
soilMoist1: 36, soilMoist2: 37, soilMoist3: 37, soilMoist4: 35,
stormRain: 0.0, usUnits: 1, UV: 4, uvradiation: 140.0, weekRain: 0.2,
wh31_ch1_batt: 0, wh31_ch1_sig: 4, wh40_batt: 0, wh40_sig: 4,
wh41_ch1_batt: 4, wh41_ch1_sig: 4, wh41_ch2_batt: 3, wh41_ch2_sig: 4,
wh51_ch1_batt: 0, wh51_ch1_sig: 4, wh51_ch2_batt: 0, wh51_ch2_sig: 4,
wh51_ch3_batt: 0, wh51_ch3_sig: 4, wh51_ch4_batt: 0, wh51_ch4_sig: 4,
wh57_batt: 4, wh57_sig: 4, wh68_batt: 1.56, wh68_sig: 4, windchill:
73.22, windDir: 359, windGust: 6.934519741011844, windSpeed:
4.026495333490748, yearRain: 0.2362204724409449
However, The Seasons report still shows nothing for the Current
conditions and the Out Door Temp and Humidity:
Current Conditions ♦
Outside Temperature N/A
Heat Index N/A
Wind Chill N/A
Dew Point N/A
Humidity N/A
Barometer N/A ( N/A)
Wind 1.6 m/s NW (307°)
Rain Rate 0.0 mm/h
Rain Today 0.0 mm
UV Index 2.0
Inside Temperature 18.3°C
Inside Humidity 56%
Temperature1 18.4°C
Hope I'm not being too much of a PITA.
Steven
Myndworx Asylum Lab & Fabrication Facility
On 20/01/2021 17:21, gjr80 wrote:
I do apologise, please ignore my previous post. I don't know what I
was thinking but it was clearly wrong, will teach me to rush a reply
before going out.
temp1-8 (default mapped to extraTemp1-8) come from your WH31 sensors.
outtemp (default mapped to outTemp) and outhumid (default mapped to
outHumidity) are a little more complex. If you have a WH32 it will
provide outtemp and outhumid. I believe the x-in-1 sensor arrays
(WH65, WS68 and WS80) also provide outtemp and outhumid(my
testing/development has been limited to WH32 based systems so I am
relying on literature here). In your case, given your list of sensors
and the --live-data output provided, you have no sensor that provides
what the GW1000 calls outtemp and outhumid.
Your WH31 cannot provide outtemp and outhumid but what you can do is
map the temperature and humidity data from a WH31 to WeeWX fields
outTemp and outHumidity. Your --live-data output suggests you have
just one WH31 and it is on channel 1. If you want to map its output to
outTemp/outHumidity you need a [[field_map_extensions]] stanza like this:
[[field_map_extensions]]
outTemp = temp1
outHumidity = humid1
This will remove WeeWX fields extraTemp1 and extraHumid1 from future
loop packets/archive records. You can check its operation by running
WeeWX directly or running the driver directly with the --test-driver
command line option.
Regards your missing pressure, once you have outTemp see if that
causes WeeWX to calculate the missing pressure, bear in mind though it
could take 12 hours (of outTemp data) before the calculation occurs.
My apologies again for misleading you.
Gary
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/6a3262ba-be68-abed-d7ed-3d8be34f16a4%40gmail.com.
