Thanks very much. Will give it a go! Should this be done before trying to launch or can you check out the page before info is uploaded?
On Friday, February 5, 2021 at 9:17:01 PM UTC+10 [email protected] wrote: > Hi > > when you want to get the data from the HP2551 console (that's the console > of the HP2553 package), you can only do this by the help of the interceptor > driver. > > Get it and install it - then verify what I wrote below > > You have to choose there / put in weewx.conf > > [station] > station_type = Interceptor > > [Interceptor] > device_type = ecowitt-client > port 8000 > iface = eth0 (or wlan0 depending on your network interface) > > (sometimes this latter entry is needed to be added here - no harm having > it ) > > and in the WSView app you choose the Customized option for Weather > networks, > enable Ecowitt protocol > Server IP is the IP of your MAC > path leave empty > port 8000 > interval 16 > > Otherwise follow the Interceptor driver installation instruction at GitHUB > > Some of the entries the install script will already do. > > Good luck > On 05.02.2021 11:16, PAK wrote: > > Hi all, > > I am very new and am struggling with a lot of this but hopefully this > makes sense. > > I have a Mac, with an Ecowitt HP2553. I am trying to get a handle on this > before I purchase the GW1000 and maybe a Raspberry Pi. > > The second time I tried to install Weewx it went really well until the > last command. Here's the log: - > > pak@Peters-iMac weewx % python3 ./bin/weewxd weewx.conf > > Traceback (most recent call last): > > File > "/Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework/Versions/3.8/lib/python3.8/logging/config.py", > > line 563, in configure > > handler = self.configure_handler(handlers[name]) > > File > "/Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework/Versions/3.8/lib/python3.8/logging/config.py", > > line 744, in configure_handler > > result = factory(**kwargs) > > File > "/Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework/Versions/3.8/lib/python3.8/logging/handlers.py", > > line 148, in __init__ > > BaseRotatingHandler.__init__(self, filename, mode, encoding, delay) > > File > "/Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework/Versions/3.8/lib/python3.8/logging/handlers.py", > > line 55, in __init__ > > logging.FileHandler.__init__(self, filename, mode, encoding, delay) > > File > "/Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework/Versions/3.8/lib/python3.8/logging/__init__.py", > > line 1143, in __init__ > > StreamHandler.__init__(self, self._open()) > > File > "/Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework/Versions/3.8/lib/python3.8/logging/__init__.py", > > line 1172, in _open > > return open(self.baseFilename, self.mode, encoding=self.encoding) > > PermissionError: [Errno 13] Permission denied: '/var/log/weewx.log' > > > The above exception was the direct cause of the following exception: > > > Traceback (most recent call last): > > File "./bin/weewxd", line 264, in <module> > > main() > > File "./bin/weewxd", line 81, in main > > weeutil.logger.setup(options.log_label, {}) > > File "/Users/Shared/weewx/bin/weeutil/logger.py", line 187, in setup > > logging.config.dictConfig(log_dict) > > File > "/Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework/Versions/3.8/lib/python3.8/logging/config.py", > > line 808, in dictConfig > > dictConfigClass(config).configure() > > File > "/Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework/Versions/3.8/lib/python3.8/logging/config.py", > > line 570, in configure > > raise ValueError('Unable to configure handler ' > > ValueError: Unable to configure handler 'rotate' > > pak@Peters-iMac weewx % > > I am wondering if the driver is the problem. I think I need to install an > interceptor somehow? It might all be too much for me and could be easier to > go back to Davis hehe. All I really want are daily, weekly and yearly > reports like I'm used to with WeatherLink. > > Thanks for any help, > Peter. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/62969bcb-fadf-4d05-8671-b164a0ed9390n%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/62969bcb-fadf-4d05-8671-b164a0ed9390n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/c5594503-e9f8-4fea-8ffc-c684a0d5a096n%40googlegroups.com.
