Help!! I’m sending data to pwsweather.com using a GW1000 and I can’t figure out how to send Sky Cover data. conf file below
Thanks! # WEEWX CONFIGURATION FILE # # Copyright (c) 2009-2019 Tom Keffer <[email protected]> # See the file LICENSE.txt for your rights. ############################################################################## # This section is for general configuration information. # Set to 1 for extra debug info, otherwise comment it out or set to zero debug = 0 # Root directory of the weewx data file hierarchy for this station WEEWX_ROOT = / # Whether to log successful operations log_success = True # Whether to log unsuccessful operations log_failure = True # How long to wait before timing out a socket (FTP, HTTP) connection socket_timeout = 20 # Do not modify this. It is used when installing and updating weewx. version = 4.3.0 # CPD -- Added this to keep retrying! loop_on_init = 1 ############################################################################## # This section is for information about the station. [Station] # Description of the station location location = "Granville, NY" # Latitude in decimal degrees. Negative for southern hemisphere latitude = 43.38771 # Longitude in decimal degrees. Negative for western hemisphere. longitude = -73.27025 # Altitude of the station, with unit it is in. This is downloaded from # from the station if the hardware supports it. altitude = 421, foot # Set to type of station hardware. There must be a corresponding stanza # in this file with a 'driver' parameter indicating the driver to be used. station_type = GW1000 # If you have a website, you may specify an URL station_url = http://weather.slatevalley.net # The start of the rain year (1=January; 10=October, etc.). This is # downloaded from the station if the hardware supports it. rain_year_start = 1 # Start of week (0=Monday, 6=Sunday) week_start = 6 ############################################################################## [GW1000] driver = user.gw1000 ip_address = 192.168.50.92 port = 45000 poll_interval = 20 ############################################################################## [Vantage] # This section is for the Davis Vantage series of weather stations. # Connection type: serial or ethernet # serial (the classic VantagePro) # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) type = ethernet # If the connection type is serial, a port must be specified: # Debian, Ubuntu, Redhat, Fedora, and SuSE: # /dev/ttyUSB0 is a common USB port name # /dev/ttyS0 is a common serial port name # BSD: # /dev/cuaU0 is a common serial port name # port = /dev/ttyUSB0 # If the connection type is ethernet, an IP Address/hostname is required: # host = 192.168.50.12 ###################################################### # The rest of this section rarely needs any attention. # You can safely leave it "as is." ###################################################### # Serial baud rate (usually 19200) baudrate = 19200 # TCP port (when using the WeatherLinkIP) tcp_port = 22222 # TCP send delay (when using the WeatherLinkIP): tcp_send_delay = 0.5 # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both loop_request = 1 # The id of your ISS station (usually 1). If you use a wind meter connected # to a anemometer transmitter kit, use its id iss_id = 1 # How long to wait for a response from the station before giving up (in # seconds; must be greater than 2) timeout = 10 # How long to wait before trying again (in seconds) wait_before_retry = 1.2 # How many times to try before giving up: max_tries = 10 # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 model_type = 2 # The driver to use: #driver = weewx.drivers.vantage ############################################################################## # This section is for uploading data to Internet sites [StdRESTful] [[StationRegistry]] # To register this weather station with weewx, set this to true register_this_station = true [[CWOP]] # This section is for configuring posts to CWOP. # If you wish to do this, set the option 'enable' to true, # and specify the station ID (e.g., CW1234). enable = true station = EW5855 # If this is an APRS (radio amateur) station, uncomment # the following and replace with a passcode (e.g., 12345). #passcode = replace_me (APRS stations only) [[PWSweather]] # This section is for configuring posts to PWSweather.com. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. # To guard against parsing errors, put the password in quotes. enable = true station = KNYGRANV5 password = “*************************" [[Wunderground]] # This section is for configuring posts to the Weather Underground. # If you wish to do this, set the option 'enable' to true, # and specify a station (e.g., 'KORHOODR3') and password. # To guard against parsing errors, put the password in quotes. enable = true station = KNYGRANV5 password = *************** # If you plan on using wunderfixer, set the following # to your API key: api_key = ****************************** # Set the following to True to have weewx use the WU "Rapidfire" # protocol. Not all hardware can support it. See the User's Guide. # rapidfire = False [[WeatherCloud]] id = efad7e92b2c1e3bd key = ******************************* [[Windy]] api_key = *************************** ############################################################################## # This section specifies what reports, using which skins, to generate. [StdReport] # Where the skins reside, relative to WEEWX_ROOT SKIN_ROOT = /etc/weewx/skins # Where the generated reports should go, relative to WEEWX_ROOT HTML_ROOT = /var/www/html/weewx # The database binding indicates which data should be used in reports. data_binding = wx_binding # Whether to log a successful operation log_success = True # Whether to log an unsuccessful operation log_failure = True # Each of the following subsections defines a report that will be run. # See the customizing guide to change the units, plot types and line # colors, modify the fonts, display additional sensor data, and other # customizations. Many of those changes can be made here by overriding # parameters, or by modifying templates within the skin itself. [[SeasonsReport]] # The SeasonsReport uses the 'Seasons' skin, which contains the # images, templates and plots for the report. skin = Seasons enable = true [[SmartphoneReport]] # The SmartphoneReport uses the 'Smartphone' skin, and the images and # files are placed in a dedicated subdirectory. skin = Smartphone enable = false HTML_ROOT = /var/www/html/weewx/smartphone [[MobileReport]] # The MobileReport uses the 'Mobile' skin, and the images and files # are placed in a dedicated subdirectory. skin = Mobile enable = false HTML_ROOT = /var/www/html/weewx/mobile [[StandardReport]] # This is the old "Standard" skin. By default, it is not enabled. skin = Standard enable = false [[sftp]] skin = sftp user = ************ password = ************* server = access842643070.webspace-data.io port = 22 path = /. HTML_ROOT = /var/www/html [[Belchertown]] skin = Belchertown HTML_ROOT = /var/www/html [[[Extras]]] # General Site Defaults belchertown_debug = 0 belchertown_locale = auto theme = auto theme_toggle_enabled = 1 site_title = Slate Valley Weather logo_image = "" logo_image_dark = "" radar_html = "" almanac_extras = 1 # Manifest Settings for Mobile Phones manifest_name = Slate Valley Weather manifest_short_name = MWW # Highcharts settings highcharts_enabled = 1 graph_page_show_all_button = 1 graph_page_default_graphgroup = day highcharts_homepage_graphgroup = homepage highcharts_decimal = auto highcharts_thousands = auto # MQTT Websockets defaults mqtt_websockets_enabled = 0 mqtt_websockets_host = "" mqtt_websockets_port = "" mqtt_websockets_ssl = 0 mqtt_websockets_topic = weather/loop disconnect_live_website_visitor = 1800000 # Show an alert if the page updated timestamp is older than expected with this setting. Does not apply to MQTT Websocket enabled websites # The late time threshold is defined in seconds. This should be greater than your archive_interval from weewx.conf. # Typically you would want this 2 or 3 times archive_interval show_last_updated_alert = 0 last_updated_alert_threshold = 1800 # If mqtt_websockets_enabled is set to 0, but want the page to full reload on an interval, specify this below in milliseconds. 300000 = 5 minutes webpage_autorefresh = 100000 # Image Reload Section. # Set reload_hook_images to 1 to enable, then set the number of *seconds* for each section to reload. # A value of -1 will disable reloading images in that section. # radar = the radar image if you used radar_html setting # asi = index_hook_after_station_info.inc # af = index_hook_after_forecast.inc # as = index_hook_after_snapshot.inc # ac = index_hook_after_charts.inc reload_hook_images = 0 reload_images_radar = 300 reload_images_hook_asi = -1 reload_images_hook_af = -1 reload_images_hook_as = -1 reload_images_hook_ac = -1 #Forecast Defaults footer_copyright_text = weather.slatevalley.net forecast_enabled = 1 forecast_provider = aeris forecast_api_id = *************** forecast_api_secret = ****************** forecast_units = us forecast_lang = en forecast_stale = 3540 forecast_aeris_use_metar = 1 forecast_alert_enabled = 0 forecast_alert_limit = 1 forecast_show_daily_forecast_link = 0 forecast_daily_forecast_link = "" # Station Observations. Special observation rainWithRainRate combines Daily Rain with Rain Rate in 1 line station_observations = barometer, visibility, cloudbase, dewpoint, outHumidity, rainWithRainRate, UV, radiation #Earthquake Defaults earthquake_enabled = 1 earthquake_maxradiuskm = 1000 earthquake_stale = 10740 earthquake_server = USGS [[[Labels]]] [[[[Generic]]]] # Generic labels, keyed by an observation type. # To change a label or translate it to your language # change the text after the equal sign. # Footer Information footer_copyright_text = weather.slatevalley.net footer_disclaimer_text = Never make important decisions based on this data. # Default page headers home_page_header = "Granville, NY Weather Conditions" graphs_page_header = Weather Observation Graphs records_page_header = Weather Observation Records reports_page_header = Weather Observation Reports about_page_header = About This Weather Station powered_by = Observations are powered by Ambient Weather rain = My Custom Rain Label graphs_page_day_button = Today [[FTP]] # FTP'ing the results to a webserver is treated as just another report, # albeit one with an unusual report generator! skin = Ftp # If you wish to use FTP, set "enable" to "true", then # fill out the next four lines. # Use quotes around passwords to guard against parsing errors. enable = false user = "" password = "" server = "" # The ftp server name, e.g, www.myserver.org path = "" # The destination directory, e.g., /weather # Set to True for an FTP over TLS (FTPS) connection. Not all servers # support this. secure_ftp = True # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = /var/www/html/weewx # Most FTP servers use port 21 port = 22 # Set to 1 to use passive mode, zero for active mode passive = 1 [[RSYNC]] # rsync'ing to a webserver is treated as just another report skin = Rsync # If you wish to use rsync, you must configure passwordless ssh using # public/private key authentication from the user account that weewx # runs to the user account on the remote machine where the files # will be copied. # # If you wish to use rsync, set "enable" to "true", then # fill out server, user, and path. # The server should appear in your .ssh/config file. # The user is the username used in the identity file. # The path is the destination directory, such as /var/www/html/weather. # Be sure that the user has write permissions on the destination! enable = false server = replace_me user = replace_me path = replace_me # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = /var/www/html/weewx # Rsync can be configured to remove files from the remote server if # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you # make a mistake in the remote path, you could could unintentionally # cause unrelated files to be deleted. Set to 1 to enable remote file # deletion, zero to allow files to accumulate remotely. delete = 0 #### # Various options for customizing your reports. [[Defaults]] [[[Units]]] # The following section sets what unit to use for each unit group. # NB: The unit is always in the singular. I.e., 'mile_per_hour', # NOT 'miles_per_hour' [[[[Groups]]]] group_altitude = foot # Options are 'foot' or 'meter' group_degree_day = degree_F_day # Options are 'degree_F_day' or 'degree_C_day' group_distance = mile # Options are 'mile' or 'km' group_pressure = inHg # Options are 'inHg', 'mmHg', 'mbar', or 'hPa' group_rain = inch # Options are 'inch', 'cm', or 'mm' group_rainrate = inch_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' group_speed = mile_per_hour # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' group_speed2 = mile_per_hour2 # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' group_temperature = degree_F # Options are 'degree_F' or 'degree_C' # The following section sets the formatting for each type of unit. [[[[StringFormats]]]] centibar = %.0f cm = %.2f cm_per_hour = %.2f degree_C = %.1f degree_F = %.1f degree_compass = %.0f foot = %.0f hPa = %.1f hour = %.1f inHg = %.3f inch = %.2f inch_per_hour = %.2f km = %.1f km_per_hour = %.0f km_per_hour2 = %.1f knot = %.0f knot2 = %.1f mbar = %.1f meter = %.0f meter_per_second = %.1f meter_per_second2 = %.1f mile = %.1f mile_per_hour = %.0f mile_per_hour2 = %.1f mm = %.1f mmHg = %.1f mm_per_hour = %.1f percent = %.0f second = %.0f uv_index = %.1f volt = %.1f watt_per_meter_squared = %.0f NONE = " N/A" # The following section overrides the label used for each type of unit [[[[Labels]]]] meter = " meter", " meters" # You may prefer "metre". day = " day", " days" hour = " hour", " hours" minute = " minute", " minutes" second = " second", " seconds" NONE = "" # The following section sets the format for each time scale. # The values below will work in every locale, but they may not look # particularly attractive. [[[[TimeFormats]]]] hour = %H:%M day = %X week = %X (%A) month = %x %X year = %x %X rainyear = %x %X current = %x %X ephem_day = %X ephem_year = %x %X [[[[Ordinates]]]] # Ordinal directions. The last one is for no wind direction directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW, N/A # The following section sets the base temperatures used for the # calculation of heating, cooling, and growing degree-days. [[[[DegreeDays]]]] # Base temperature for heating days, with unit: heating_base = 65, degree_F # Base temperature for cooling days, with unit: cooling_base = 65, degree_F # Base temperature for growing days, with unit: growing_base = 50, degree_F # A trend takes a difference across a time period. The following # section sets the time period, and how big an error is allowed to # still be counted as the start or end of a period. [[[[Trend]]]] time_delta = 10800 # 3 hours time_grace = 300 # 5 minutes # The labels to be used for each observation type [[[Labels]]] # Set to hemisphere abbreviations suitable for your location: hemispheres = N, S, E, W # Formats to be used for latitude whole degrees, longitude whole # degrees, and minutes: latlon_formats = %02d, %03d, %05.2f # Generic labels, keyed by an observation type. [[[[Generic]]]] barometer = Barometer dewpoint = Dew Point ET = ET heatindex = Heat Index inHumidity = Inside Humidity inTemp = Inside Temperature outHumidity = Humidity outTemp = Outside Temperature radiation = Radiation rain = Rain rainRate = Rain Rate UV = UV Index windDir = Wind Direction windGust = Gust Speed windGustDir = Gust Direction windSpeed = Wind Speed windchill = Wind Chill windgustvec = Gust Vector windvec = Wind Vector extraTemp1 = Garage extraTemp2 = Basement extraTemp3 = Temperature3 cloudbase = Cloud Cover # Sensor status indicators rxCheckPercent = Signal Quality txBatteryStatus = Transmitter Battery windBatteryStatus = Wind Battery rainBatteryStatus = Rain Battery outTempBatteryStatus = Outside Temperature Battery inTempBatteryStatus = Inside Temperature Battery consBatteryVoltage = Console Battery heatingVoltage = Heating Battery supplyVoltage = Supply Voltage referenceVoltage = Reference Voltage [[[Almanac]]] # The labels to be used for the phases of the moon: moon_phases = New, Waxing crescent, First quarter, Waxing gibbous, Full, Waning gibbous, Last quarter, Waning crescent ############################################################################## # This service acts as a filter, converting the unit system coming from # the hardware to a unit system in the database. [StdConvert] # The target_unit affects only the unit system in the database. Once # chosen it cannot be changed without converting the entire database. # Modification of target_unit after starting weewx will result in # corrupt data - the database will contain a mix of US and METRIC data. # # The value of target_unit does not affect the unit system for # reporting - reports can display US, Metric, or any combination of units. # # In most cases, target_unit should be left as the default: US # # In particular, those migrating from a standard wview installation # should use US since that is what the wview database contains. # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' ############################################################################## # This section can adjust data using calibration expressions. [StdCalibrate] [[Corrections]] # For each type, an arbitrary calibration expression can be given. # It should be in the units defined in the StdConvert section. # Example: foo = foo + 0.2 radiation = luminosity/126.7 if luminosity is not None else None ############################################################################## # This section is for quality control checks. If units are not specified, # values must be in the units defined in the StdConvert section. [StdQC] [[MinMax]] barometer = 26, 32.5, inHg pressure = 24, 34.5, inHg outTemp = -40, 120, degree_F inTemp = 10, 120, degree_F outHumidity = 0, 100 inHumidity = 0, 100 windSpeed = 0, 120, mile_per_hour rain = 0, 10, inch rainRate = 0, 6 ############################################################################## # This section controls the origin of derived values. [StdWXCalculate] [[Calculations]] # How to calculate derived quantities. Possible values are: # hardware - use the value provided by hardware # software - use the value calculated by weewx # prefer_hardware - use value provide by hardware if available, # otherwise use value calculated by weewx pressure = prefer_hardware altimeter = prefer_hardware appTemp = prefer_hardware barometer = prefer_hardware beaufort = prefer_hardware cloudbase = prefer_hardware dewpoint = prefer_hardware ET = prefer_hardware heatindex = prefer_hardware humidex = prefer_hardware inDewpoint = prefer_hardware maxSolarRad = prefer_hardware rainRate = prefer_hardware windchill = prefer_hardware windrun = prefer_hardware ############################################################################## # For hardware that supports it, this section controls how often the # onboard clock gets updated. [StdTimeSynch] # How often to check the weather station clock for drift (in seconds) clock_check = 7200 # How much it can drift before we will correct it (in seconds) max_drift = 2 ############################################################################## # This section is for configuring the archive service. [StdArchive] # If the station hardware supports data logging then the archive interval # will be downloaded from the station. Otherwise, specify it (in seconds). archive_interval = 60 # If possible, new archive records are downloaded from the station # hardware. If the hardware does not support this, then new archive # records will be generated in software. # Set the following to "software" to force software record generation. record_generation = software # Whether to include LOOP data in hi/low statistics loop_hilo = True # The data binding used to save archive records data_binding = wx_binding ############################################################################## # This section binds a data store to a database. [DataBindings] [[wx_binding]] # The database must match one of the sections in [Databases]. # This is likely to be the only option you would want to change. database = archive_sqlite # The name of the table within the database table_name = archive # The manager handles aggregation of data for historical summaries manager = weewx.manager.DaySummaryManager # The schema defines the structure of the database. # It is *only* used when the database is created. schema = schemas.wview_extended.schema ############################################################################## # This section defines various databases. [Databases] # A SQLite database is simply a single file [[archive_sqlite]] database_name = weewx.sdb database_type = SQLite # MySQL [[archive_mysql]] database_name = weewx database_type = MySQL ############################################################################## # This section defines defaults for the different types of databases. [DatabaseTypes] # Defaults for SQLite databases [[SQLite]] driver = weedb.sqlite # Directory in which the database files are located SQLITE_ROOT = /var/lib/weewx # Defaults for MySQL databases [[MySQL]] driver = weedb.mysql # The host where the database is located host = localhost # The user name for logging in to the host user = weewx # The password for the user name (quotes guard against parsing errors) password = weewx ############################################################################## # This section configures the internal weewx engine. [Engine] # The following section specifies which services should be run and in what order. [[Services]] prep_services = weewx.engine.StdTimeSynch data_services = , process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, weewx.wxxtypes.StdDelta archive_services = weewx.engine.StdArchive restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, user.wcloud.WeatherCloud, user.windy.Windy report_services = weewx.engine.StdPrint, weewx.engine.StdReport ############################################################################## ############################################################################## # Options for extension 'GW1000' [Accumulator] [[daymaxwind]] extractor = last [[lightning_distance]] extractor = last [[lightning_strike_count]] extractor = sum [[lightning_last_det_time]] extractor = last [[stormRain]] extractor = last [[hourRain]] extractor = last [[dayRain]] extractor = last [[weekRain]] extractor = last [[monthRain]] extractor = last [[yearRain]] extractor = last [[totalRain]] extractor = last [[pm2_51_24hav]] extractor = last [[pm2_52_24hav]] extractor = last [[pm2_53_24hav]] extractor = last [[pm2_54_24hav]] extractor = last [[wh40_batt]] extractor = last [[wh26_batt]] extractor = last [[wh25_batt]] extractor = last [[wh65_batt]] extractor = last [[wh31_ch1_batt]] extractor = last [[wh31_ch2_batt]] extractor = last [[wh31_ch3_batt]] extractor = last [[wh31_ch4_batt]] extractor = last [[wh31_ch5_batt]] extractor = last [[wh31_ch6_batt]] extractor = last [[wh31_ch7_batt]] extractor = last [[wh31_ch8_batt]] extractor = last [[wh41_ch1_batt]] extractor = last [[wh41_ch2_batt]] extractor = last [[wh41_ch3_batt]] extractor = last [[wh41_ch4_batt]] extractor = last [[wh51_ch1_batt]] extractor = last [[wh51_ch2_batt]] extractor = last [[wh51_ch3_batt]] extractor = last [[wh51_ch4_batt]] extractor = last [[wh51_ch5_batt]] extractor = last [[wh51_ch6_batt]] extractor = last [[wh51_ch7_batt]] extractor = last [[wh51_ch8_batt]] extractor = last [[wh51_ch9_batt]] extractor = last [[wh51_ch10_batt]] extractor = last [[wh51_ch11_batt]] extractor = last [[wh51_ch12_batt]] extractor = last [[wh51_ch13_batt]] extractor = last [[wh51_ch14_batt]] extractor = last [[wh51_ch15_batt]] extractor = last [[wh51_ch16_batt]] extractor = last [[wh55_ch1_batt]] extractor = last [[wh55_ch2_batt]] extractor = last [[wh55_ch3_batt]] extractor = last [[wh55_ch4_batt]] extractor = last [[wh57_batt]] extractor = last [[wh68_batt]] extractor = last [[ws80_batt]] extractor = last [[24havpm251]] extractor = last [[24havpm252]] extractor = last [[24havpm253]] extractor = last [[24havpm254]] extractor = last [[pm2_51_24h_avg]] extractor = last [[pm2_52_24h_avg]] extractor = last [[pm2_53_24h_avg]] extractor = last [[pm2_54_24h_avg]] extractor = last [[pm2_55_24h_avg]] extractor = last [[pm10_24h_avg]] extractor = last [[co2_24h_avg]] extractor = last [[wh45_batt]] extractor = last [[wh40_sig]] extractor = last [[wh26_sig]] extractor = last [[wh25_sig]] extractor = last [[wh65_sig]] extractor = last [[wh31_ch1_sig]] extractor = last [[wh31_ch2_sig]] extractor = last [[wh31_ch3_sig]] extractor = last [[wh31_ch4_sig]] extractor = last [[wh31_ch5_sig]] extractor = last [[wh31_ch6_sig]] extractor = last [[wh31_ch7_sig]] extractor = last [[wh31_ch8_sig]] extractor = last [[wh41_ch1_sig]] extractor = last [[wh41_ch2_sig]] extractor = last [[wh41_ch3_sig]] extractor = last [[wh41_ch4_sig]] extractor = last [[wh45_sig]] extractor = last [[wh51_ch1_sig]] extractor = last [[wh51_ch2_sig]] extractor = last [[wh51_ch3_sig]] extractor = last [[wh51_ch4_sig]] extractor = last [[wh51_ch5_sig]] extractor = last [[wh51_ch6_sig]] extractor = last [[wh51_ch7_sig]] extractor = last [[wh51_ch8_sig]] extractor = last [[wh51_ch9_sig]] extractor = last [[wh51_ch10_sig]] extractor = last [[wh51_ch11_sig]] extractor = last [[wh51_ch12_sig]] extractor = last [[wh51_ch13_sig]] extractor = last [[wh51_ch14_sig]] extractor = last [[wh51_ch15_sig]] extractor = last [[wh51_ch16_sig]] extractor = last [[wh55_ch1_sig]] extractor = last [[wh55_ch2_sig]] extractor = last [[wh55_ch3_sig]] extractor = last [[wh55_ch4_sig]] extractor = last [[wh57_sig]] extractor = last [[wh68_sig]] extractor = last [[ws80_sig]] extractor = last -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/bd61fbbb-516a-462f-aba0-57612bf5b396%40Spark.
