I ran wunderfixer with verbose: wunderfixer -v -d 2021-03-24 Using configuration file /etc/weewx/weewx.conf. Using database binding 'wx_binding', which is bound to database 'archive_sqlite' Weather Underground Station: KNMALBUQ335 Date to check: 2021-03-24 Number of archive records: 288 Number of WU records: 231 Number of missing records: 57
Missing records: 2021-03-24 06:15:00 MDT (1616588100); 29.976"; 31.8F; 94%;16.6 mph; 82 deg;23.8 mph gust; 30.3F; 0.00" rain ...published. 2021-03-24 06:20:00 MDT (1616588400); N/A ; 32.0F; 94%;15.9 mph; 122 deg;26.3 mph gust; 30.3F; 0.00" rain ...published. 2021-03-24 06:25:00 MDT (1616588700); N/A ; 32.0F; 93%;18.8 mph; 88 deg;20.7 mph gust; 30.2F; 0.00" rain ...published. 2021.... On Monday, April 5, 2021 at 2:54:49 PM UTC-6 [email protected] wrote: > > Bottom Line: I have tried to use wunderfixer to upload about 5 hours of > data to wunderground (comcast was down for 5 hours during a storm on March > 24) and nothing gets published even though there are no complaints. > > SAMPLE FROM WUNDERFIXER RUN: > pi_at_raspberrypi:~ $ wunderfixer -d 2021-03-24 > Using configuration file /etc/weewx/weewx.conf. > Using database binding 'wx_binding', which is bound to database > 'archive_sqlite' > 2021-03-24 06:15:00 MDT (1616588100); 29.976"; 31.8F; 94%;16.6 mph; 82 > deg;23.8 mph gust; 30.3F; 0.00" rain ...published. > 2021-03-24 06:20:00 MDT (1616588400); N/A ; 32.0F; 94%;15.9 mph; 122 > deg;26.3 mph gust; 30.3F; 0.00" rain ...published. > 2021-03-24 06:25:00 MDT (1616588700); N/A ; 32.0F; 93%;18.8 mph; 88 > deg;20.7 mph gust; 30.2F; 0.00" rain ...published. > 2021-03-24 06:30:00 MDT (1616589000); 29.973"; 32.0F; 93%;14.7 mph; 160 > deg;17.1 mph gust; 30.2F; 0.00" rain ...published. > 2021-03-24 06:35:00 MDT (1616589300); 29.972"; 32.1F; 93%;15.9 mph; 96 > deg;19.7 mph gust; 30.3F; 0.00" rain ...published. > 2021-03-24 06:40:00 MDT (1616589600); 29.973"; 32.0F; 93%;16.7 mph; 104 > deg;22.2 mph gust; 30.2F; 0.00" rain ...published. > 2021-03-24 06:45:00 MDT (1616589900); 29.973"; 32.0F; 93%;22.0 mph; 103 > deg;27.4 mph gust; 30.2F; 0.00" rain ...published. > 2021-03-24 06:50:00 MDT (1616590200); 29.973"; 32.0F; 93%;14.8 mph; 85 > deg;21.7 mph gust; 30.2F; 0.00" rain ...published. > 2021-03-24 06:55:00 MDT (1616590500); 29.976"; 32.0F; 93%;15.7 mph; 45 > deg;19.1 mph gust; 30.2F; 0.00" rain ...published. > 2021-03-24 07:00:00 MDT (1616590800); 29.978"; 31.8F; 94%;16.7 mph; 180 > deg;20.2 mph gust; 30.3F; 0.00" rain ...published. > 2021-03-24 07:05:00 MDT (1616591100); 29.986"; 31.6F; 95%;19.9 mph; 45 > deg;25.3 mph gust; 30.3F; 0.00" rain ...published. > 2021-03-24 07:10:00 MDT (1616591400); 29.986"; 31.6F; 95%;20.7 mph; 94 > deg;25.3 mph gust; 30.3F; 0.00" rain ...published. > 2021-03-24 07:15:00 MDT (1616591700); 29.983"; 31.6F; 94%;18.8 mph; 151 > deg;28.4 mph gust; 30.1F; 0.00" rain ...published. > 2021-03-24 07:20:00 MDT (1616592000); 29.978"; 31.7F; 93%;22.2 mph; 81 > deg;33.0 mph gust; 29.9F; 0.00" rain ...published. > 2021-03-24 07:25:00 MDT (1616592300); 29.979"; 31.6F; 94%;16.6 mph; 85 > deg;24.8 mph gust; 29.9F; 0.00" rain ...published. > 2021-03-24 07:30:00 MDT (1616592600); 29.979"; 31.6F; 95%;22.6 mph; 70 > deg;24.8 mph gust; 30.3F; 0.00" rain ...published. > 2021-03-24 07:35:00 MDT (1616592900); 29.982"; 31.4F; 95%;18.5 mph; 76 > deg;26.9 mph gust; 30.1F; 0.00" rain ...published. > ........(lots more lines) > 2021-03-24 10:45:00 MDT (1616604300); 30.054"; 33.0F; 87%;15.1 mph; 81 > deg;26.3 mph gust; 29.7F; 0.00" rain ...published. > 2021-03-24 10:50:00 MDT (1616604600); 30.049"; 33.3F; 87%;14.9 mph; 89 > deg;22.2 mph gust; 29.8F; 0.00" rain ...published. > 2021-03-24 10:55:00 MDT (1616604900); 30.045"; 33.5F; 86%;16.0 mph; 106 > deg;22.2 mph gust; 29.9F; 0.00" rain ...published. > pi_at_raspberrypi:~ $ > > > I can repeat this wunderfixer command an hour later or a week later and > see the same result -- the data is "published" but nothing shows up at > weather underground. See attached file! Data from 6am to 11am is missing. > > I checked my API key and it is OK. If I change one character in the API > key in my weewx.conf and restart weewx, I will get complaints about the API > key. > > I have written software for many years and used weewx for several years, > so I can help with finding the problem. Right now I am stumped. > > Thanks, > Ralph Peters -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/0b489054-90bd-4406-8e45-f2761e688d2dn%40googlegroups.com.
