Tom
Apologies, it's 0140 in the morning here and it's been a long day!
Completed the upgrade but this time removed the plug and then re-inserted
it post the reboot, all is now well.
pi@raspberrypi:~ $ service weewx status
● weewx.service - LSB: weewx weather system
Loaded: loaded (/etc/init.d/weewx; generated)
Active: active (running) since Thu 2021-04-22 01:36:39 BST; 1min 21s ago
Docs: man:systemd-sysv-generator(8)
Process: 437 ExecStart=/etc/init.d/weewx start (code=exited,
status=0/SUCCESS)
Tasks: 4 (limit: 4915)
CGroup: /system.slice/weewx.service
└─595 python3 /usr/share/weewx/weewxd --daemon
--pidfile=/var/run/weewx.pid /etc/weewx/weewx.conf
Apr 22 01:36:39 raspberrypi python3[595]: weewx[595] INFO weewx.restx:
CWOP: Posting not enabled.
Apr 22 01:36:39 raspberrypi python3[595]: weewx[595] INFO weewx.restx: WOW:
Posting not enabled.
Apr 22 01:36:39 raspberrypi python3[595]: weewx[595] INFO weewx.restx:
AWEKAS: Data will be uploaded for user DMacWx
Apr 22 01:36:39 raspberrypi python3[595]: weewx[595] INFO __main__:
Starting up weewx version 4.5.1
Apr 22 01:36:39 raspberrypi python3[595]: weewx[595] INFO weewx.engine:
Clock error is 18.35 seconds (positive is fast)
Apr 22 01:36:39 raspberrypi python3[595]: weewx[595] INFO
weewx.drivers.vantage: Clock set to 2021-04-22 01:36:40 BST (1619051800)
Apr 22 01:36:39 raspberrypi python3[595]: weewx[595] INFO weewx.engine:
Using binding 'wx_binding' to database 'weewx.sdb'
Apr 22 01:36:39 raspberrypi python3[595]: weewx[595] INFO weewx.manager:
Starting backfill of daily summaries
Apr 22 01:36:39 raspberrypi python3[595]: weewx[595] INFO weewx.manager:
Daily summaries up to date
Apr 22 01:36:40 raspberrypi python3[595]: weewx[595] INFO weewx.engine:
Starting main packet loop.
pi@raspberrypi:~ $
Thanks for the suggestion Peter, appears to have fixed it.
Regards
Dave
On Thursday, 22 April 2021 at 01:28:21 UTC+1 [email protected] wrote:
> Well, geez, we're not trying to fix the working system. Try it on the
> broken system.
>
> On Wed, Apr 21, 2021 at 5:21 PM Dave McCreath <[email protected]> wrote:
>
>> Tom
>>
>> Please be aware that my answer is for the current working system, not the
>> one that was broken.
>>
>> I can try the RPi upgrade again and see if the file is located within the
>> devices directory?
>>
>> Dave
>>
>> On Thursday, 22 April 2021 at 01:14:53 UTC+1 Dave McCreath wrote:
>>
>>> Tom
>>>
>>>
>>>
>>> Hi.
>>>
>>>
>>>
>>> Yep, mine is the same as yours:
>>>
>>>
>>>
>>> [ 4689.183852] cp210x ttyUSB0: cp210x converter now disconnected from
>>> ttyUSB0
>>>
>>> [ 4689.183939] cp210x 1-1.4:1.0: device disconnected
>>>
>>> [ 4689.633565] usb 1-1.4: new full-speed USB device number 5 using
>>> xhci_hcd
>>>
>>> [ 4692.803586] usb 1-1.4: new full-speed USB device number 6 using
>>> xhci_hcd
>>>
>>> [ 4692.938998] usb 1-1.4: New USB device found, idVendor=10c4,
>>> idProduct=ea60, bcdDevice= 1.00
>>>
>>> [ 4692.939011] usb 1-1.4: New USB device strings: Mfr=1, Product=2,
>>> SerialNumber=3
>>>
>>> [ 4692.939021] usb 1-1.4: Product: CP2102 USB to UART Bridge Controller
>>>
>>> [ 4692.939031] usb 1-1.4: Manufacturer: Silicon Labs
>>>
>>> [ 4692.939040] usb 1-1.4: SerialNumber: 0001
>>>
>>> [ 4692.946665] cp210x 1-1.4:1.0: cp210x converter detected
>>>
>>> [ 4692.952907] usb 1-1.4: cp210x converter now attached to ttyUSB0
>>>
>>> [ 4693.217302] usb 1-1.4: USB disconnect, device number 6
>>>
>>> [ 4693.217689] cp210x ttyUSB0: cp210x converter now disconnected from
>>> ttyUSB0
>>>
>>> [ 4693.217742] cp210x 1-1.4:1.0: device disconnected
>>>
>>> [ 4693.513548] usb 1-1.4: new full-speed USB device number 7 using
>>> xhci_hcd
>>>
>>> [ 4693.648964] usb 1-1.4: New USB device found, idVendor=10c4,
>>> idProduct=ea60, bcdDevice= 1.00
>>>
>>> [ 4693.648972] usb 1-1.4: New USB device strings: Mfr=1, Product=2,
>>> SerialNumber=3
>>>
>>> [ 4693.648979] usb 1-1.4: Product: CP2102 USB to UART Bridge Controller
>>>
>>> [ 4693.648986] usb 1-1.4: Manufacturer: Silicon Labs
>>>
>>> [ 4693.648992] usb 1-1.4: SerialNumber: 0001
>>>
>>> [ 4693.652553] cp210x 1-1.4:1.0: cp210x converter detected
>>>
>>> [ 4693.657075] usb 1-1.4: cp210x converter now attached to ttyUSB0
>>>
>>> pi@raspberrypi:~ $
>>>
>>>
>>>
>>> Regards
>>>
>>>
>>>
>>> Dave
>>>
>>>
>>>
>>> *From:* [email protected] <[email protected]> *On
>>> Behalf Of *Tom Keffer
>>> *Sent:* 22 April 2021 01:07
>>> *To:* weewx-user <[email protected]>
>>> *Subject:* Re: [weewx-user] Re: RPi WeeWx Python 3.7 Issue
>>>
>>>
>>>
>>> Do you have a device /dev/ttyUSB0? That's normally where a Vantage shows
>>> up in the device directory, but not always.
>>>
>>>
>>>
>>> The most reliable way to find out where the Vantage ended up is to
>>> unplug it, plug it in again, then type 'dmesg'. This will look something
>>> like:
>>>
>>>
>>>
>>> *dmesg*
>>>
>>> [14818.699217] usb 2-2.1: USB disconnect, device number 4
>>> [14818.699660] pl2303 ttyUSB0: pl2303 converter now disconnected from
>>> ttyUSB0
>>> [14818.699710] pl2303 2-2.1:1.0: device disconnected
>>> [14820.731608] usb 2-2.1: new full-speed USB device number 10 using
>>> xhci_hcd
>>> [14820.844750] usb 2-2.1: New USB device found, idVendor=05ad,
>>> idProduct=0fba, bcdDevice= 3.00
>>> [14820.844756] usb 2-2.1: New USB device strings: Mfr=1, Product=2,
>>> SerialNumber=0
>>> [14820.844759] usb 2-2.1: Product: USB-Serial Controller
>>> [14820.844761] usb 2-2.1: Manufacturer: Prolific Technology Inc.
>>> [14820.852720] pl2303 2-2.1:1.0: pl2303 converter detected
>>> [14820.856368] usb 2-2.1: pl2303 converter now attached to ttyUSB0
>>>
>>>
>>>
>>> In my case, the serial-to-usb converter showed up at /dev/ttyUSB0, but
>>> your results may differ.
>>>
>>>
>>>
>>> -tk
>>>
>>>
>>>
>>> On Wed, Apr 21, 2021 at 4:34 PM Dave McCreath <[email protected]>
>>> wrote:
>>>
>>> Forgot to add.
>>>
>>>
>>>
>>> Now running 4.5.1 from a backup SD card and all is currently well but
>>> does not look like I'll be able to update/upgrade the RPi until I figure
>>> out what's wrong.
>>>
>>>
>>>
>>> Regards
>>>
>>>
>>>
>>> Dave
>>>
>>> On Thursday, 22 April 2021 at 00:08:18 UTC+1 Dave McCreath wrote:
>>>
>>> Good Evening Venerable Experts
>>>
>>>
>>>
>>> Earlier on today I updated my RPi (sudu apt-get update && sudo apt-get
>>> upgrade). On rebooting WeeWx failed to start, this was post an upgrade
>>> from 4.2 to 4.5.1. (I have WeeWx added to the sources list)
>>>
>>>
>>>
>>> So, being savvy, rebooted from a backup sd card to bring the system back
>>> to where it was prior to the update/upgrade and WeeWx version 4.2.
>>>
>>>
>>>
>>> I then went about updating/upgrading WeeWx from 4.2 to 4.5 (sudo apt-get
>>> install weewx), that went fine, rebooted and WeeWx ran without any issues
>>> post the upgrade.
>>>
>>>
>>>
>>> Next I then tried sudu apt-get update && sudo apt-get upgrade again.
>>> Post a reboot, exactly the same issue as before, WeeWx would not start:
>>>
>>>
>>>
>>> pi@raspberrypi:~ $ service weewx status
>>>
>>> ● weewx.service - LSB: weewx weather system
>>>
>>> Loaded: loaded (/etc/init.d/weewx; generated)
>>>
>>> Active: active (exited) since Wed 2021-04-21 23:48:06 BST; 2min 28s
>>> ago
>>>
>>> Docs: man:systemd-sysv-generator(8)
>>>
>>> Process: 338 ExecStart=/etc/init.d/weewx start (code=exited,
>>> status=0/SUCCESS)
>>>
>>>
>>>
>>> Apr 21 23:48:06 raspberrypi python3[611]: weewx[611] CRITICAL
>>> weewx.engine: **** self.port.openPort()
>>>
>>> Apr 21 23:48:06 raspberrypi python3[611]: weewx[611] CRITICAL
>>> weewx.engine: **** File "/usr/share/weewx/weewx/drivers/vantage.py",
>>> line 308, in openPort
>>>
>>> Apr 21 23:48:06 raspberrypi python3[611]: weewx[611] CRITICAL
>>> weewx.engine: **** self.serial_port = serial.Serial(self.port,
>>> self.baudrate, timeout=self.timeout)
>>>
>>> Apr 21 23:48:06 raspberrypi python3[611]: weewx[611] CRITICAL
>>> weewx.engine: **** File
>>> "/usr/lib/python3/dist-packages/serial/serialutil.py", line 240, in __init__
>>>
>>> Apr 21 23:48:06 raspberrypi python3[611]: weewx[611] CRITICAL
>>> weewx.engine: **** self.open()
>>>
>>> Apr 21 23:48:06 raspberrypi python3[611]: weewx[611] CRITICAL
>>> weewx.engine: **** File
>>> "/usr/lib/python3/dist-packages/serial/serialposix.py", line 268, in open
>>>
>>> Apr 21 23:48:06 raspberrypi python3[611]: weewx[611] CRITICAL
>>> weewx.engine: **** raise SerialException(msg.errno, "could not
>>> open port {}: {}".format(self._port, msg))
>>>
>>> Apr 21 23:48:06 raspberrypi python3[611]: weewx[611] CRITICAL
>>> weewx.engine: **** serial.serialutil.SerialException: [Errno 2] could
>>> not open port /dev/ttyUSB0: [Errno 2] No such file or directory:
>>> '/dev/ttyUSB0'
>>>
>>> Apr 21 23:48:06 raspberrypi python3[611]: weewx[611] CRITICAL __main__:
>>> Unable to load driver: [Errno 2] could not open port /dev/ttyUSB0: [Errno
>>> 2] No such file or directory: '/dev/ttyUSB0'
>>>
>>> Apr 21 23:48:06 raspberrypi python3[611]: weewx[611] CRITICAL
>>> __main__: **** Exiting...
>>>
>>>
>>>
>>> Any ideas?
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/27e48fc1-8ea2-44c7-bdaa-73cfb1c15dcen%40googlegroups.com
>>>
>>> <https://groups.google.com/d/msgid/weewx-user/27e48fc1-8ea2-44c7-bdaa-73cfb1c15dcen%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>> --
>>> You received this message because you are subscribed to a topic in the
>>> Google Groups "weewx-user" group.
>>> To unsubscribe from this topic, visit
>>> https://groups.google.com/d/topic/weewx-user/8CM2mGJ4eh8/unsubscribe.
>>> To unsubscribe from this group and all its topics, send an email to
>>> [email protected].
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/CAPq0zECZ4Z%3DFCUUjoGFqJAgVkMg-WAiD6YpV2RXo69uMtAv7%2BA%40mail.gmail.com
>>>
>>> <https://groups.google.com/d/msgid/weewx-user/CAPq0zECZ4Z%3DFCUUjoGFqJAgVkMg-WAiD6YpV2RXo69uMtAv7%2BA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>>
> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/79f2b133-943c-487f-9038-a0d0458110ccn%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/79f2b133-943c-487f-9038-a0d0458110ccn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/edd1d0b1-69ae-4732-9c5d-8d3783cbdb8bn%40googlegroups.com.
