Hello, It took a little while, but thank to a full reinstall, I have been able to fully reconfigure my weewx and I now have the expected summary hourly data.
there was something messed in my install/ extension / own source code changes that messed things up. Now that everything has been cleaned, it work way better. Thank you again for your help. On Friday, April 16, 2021 at 3:16:31 AM UTC+2 [email protected] wrote: > Sure. You can send me a dump file, or anything else, to recreate it. > > On Thu, Apr 15, 2021 at 1:18 PM [email protected] <[email protected]> > wrote: > >> Ok, I will try setup a minimal repro skin. >> is mysql for the data table ok? >> >> On Thursday, April 15, 2021 at 1:02:48 AM UTC+2 [email protected] wrote: >> >>> I can only fix what I can reproduce and, so far, I have not been able >>> to. My apologies. If you can send me a simple template and database that >>> reproduces the problem, I'll go at it. >>> >>> >>> >>> On Tue, Apr 13, 2021 at 11:35 PM [email protected] <[email protected]> >>> wrote: >>> >>>> Below, is the full template file as google does not seem to allow me to >>>> attach a file to a post. >>>> >>>> ## template for json data to feed the steel series gauges >>>> ## $Id: gauge-data.txt.tmpl 1279 2015-03-01 15:49:03Z mwall $ >>>> ## by Matthew Wall on flight 868 ;) >>>> ## 31dec2014 >>>> ## Updated 25jan2015 by M Crossley, changed cloudbase: to >>>> cloudbasevalue: >>>> ## Updated 12jan2016 by M Crossley, fixes applied from here: >>>> https://groups.google.com/forum/#!topic/weewx-user/rDdSbzQWbFw >>>> ## Updated 12mar2016 by M Crossley, force pressure UoM mbar to mb. >>>> ## added UoM consitency from unit_type >>>> rather than labels which can be localised >>>> ## force rain in cm to mm as gauges do >>>> not currently handle cm's. >>>> ## Updated 04oct2016 by M Crossley, added changes from PR4 >>>> ## Updated 3Jun2020 by G Roderick, rain calculations now tolerate a >>>> station that does not provide rain data >>>> ## (as distinct from rain data that is >>>> 0) >>>> ## definitions for the tags can be found here: >>>> ## http://wiki.sandaysoft.com/a/Webtags >>>> ## >>>> ## the following fields are not directly available from weewx: >>>> ## >>>> ## ver:10? >>>> ## apptemp - calculated in this template >>>> ## apptempTL >>>> ## apptempTH >>>> ## TapptempTL >>>> ## TapptempTH >>>> ## humidex - calculated in this template >>>> ## forecast - calculated by forecasting module >>>> ## LastRainTipISO >>>> ## Tbeaufort - calculated by this template >>>> ## BearingRangeFrom10 - lowest clockwise bearing in last 10 minutes >>>> ## BearingRangeTo10 - highest clockwise bearing in last 10 minutes >>>> ## CurrentSolarMax - calculated in this template >>>> ## WindRoseData >>>> ## windrun - calculated in this template >>>> ## >>>> ## ver:12 >>>> ## cloudbasevalue - calculated in this template in feet >>>> ## cloudbaseunit - defined in this template as ft >>>> ## >>>> ## ver:13 >>>> ## changed UoMs >>>> ## >>>> #import math >>>> #import time >>>> ## >>>> ## get the time in formats that we need later >>>> #set $ts=float($current.dateTime.raw) >>>> #set $timeutc=time.strftime("%Y,%m,%d,%H,%M,%S", time.gmtime($ts)) >>>> ## >>>> ## get some formats for calculated obs >>>> #set $temp_format = $unit.format.outTemp >>>> #set $press_format = $unit.format.pressure >>>> #set $rain_format = $unit.format.rain >>>> #set $rainrate_format = $unit.format.rainRate >>>> #set $cloudbase_format = $unit.format.cloudbase >>>> #set $windrun_format = $unit.format.windrun >>>> #set $radiation_format = $unit.format.radiation >>>> ## >>>> ## see if the station has contact with the sensor >>>> #set $sensorContactLost = 0 >>>> #set $rxchk = $getVar('current.rxCheckPercent.raw', 100) >>>> #if $rxchk is not None and $rxchk == 0 >>>> #set $sensorContactLost = 1 >>>> #end if >>>> ## >>>> ## calculate humidex >>>> ## http://www.physlink.com/reference/weather.cfm >>>> #if $varExists('current.outTemp') and $current.outTemp.raw is not None >>>> and $varExists('current.dewpoint') and $current.dewpoint.raw is not None >>>> #set $oT_C = $current.outTemp.degree_C.raw >>>> #set $dp_K = $current.dewpoint.degree_C.raw + 273.16 >>>> #set $e = 6.11 * math.exp(5417.7530 * ((1/273.16) - 1/$dp_K)) >>>> #set $h = 0.5555 * ($e - 10.0) >>>> #if $h > 0 >>>> #set $humidex = $oT_C + $h >>>> #else >>>> #set $humidex = $oT_C >>>> #end if >>>> #if $unit.unit_type.outTemp == 'degree_F' >>>> #set $humidex = 32.0 + 1.8 * $humidex >>>> #end if >>>> #set $humidex = $temp_format % $humidex >>>> #else >>>> #set $humidex = 'N/A' >>>> #end if >>>> ## >>>> ## calculate apparent temperature >>>> ## >>>> ## http://www.bom.gov.au/info/thermal_stress/#atapproximation >>>> ## AT = Ta + 0.33*e - 0.70*ws - 4.00 >>>> ## where AT and Ta (air temperature) are deg-C, >>>> ## e is water vapor pressure >>>> ## ws is wind speed (m/s) at elevation of 10 meters >>>> ## e = rh / 100 * 6.105 * exp(17.27 * Ta / (237.7 + Ta)) >>>> ## rh is relative humidity >>>> ## >>>> ## http://www.ncdc.noaa.gov/societal-impacts/apparent-temp/ >>>> ## AT = -2.7 + 1.04*T + 2.0*e -0.65*v >>>> ## where AT and T (air temperature) are deg-C, >>>> ## e is vapor pressure in kPa, >>>> ## and v is 10m wind speed in m/sec >>>> ## >>>> #if $varExists('current.outTemp') and $current.outTemp.raw is not None >>>> and $varExists('current.outHumidity') and $current.outHumidity.raw is not >>>> None and $varExists('current.windSpeed') and $current.windSpeed.raw is not >>>> None >>>> #set $oT_C = $current.outTemp.degree_C.raw >>>> #set $rh = $current.outHumidity.raw >>>> #set $ws = $current.windSpeed.meter_per_second.raw >>>> #set $e = ($rh / 100) * 6.105 * math.exp(17.27 * $oT_C / (237.7 + >>>> $oT_C)) >>>> #set $apptemp = $oT_C + 0.33 * $e - 0.7 * $ws - 4.0 >>>> #if $unit.unit_type.outTemp == 'degree_F' >>>> #set $apptemp = 32.0 + 1.8 * $apptemp >>>> #end if >>>> #set $apptemp = $temp_format % $apptemp >>>> #else >>>> #set $apptemp = 'N/A' >>>> #end if >>>> ## >>>> ## calculate the cloud base in feet >>>> #if $varExists('current.outTemp') and $current.outTemp.raw is not None >>>> and $varExists('current.dewpoint') and $current.dewpoint.raw is not None >>>> #set $oT_F = $current.outTemp.degree_F.raw >>>> #set $dp_F = $current.dewpoint.degree_F.raw >>>> #set $a_f = $station.altitude.foot.raw >>>> #set $cloudbase = (($oT_F - $dp_F) / 4.4 * 1000) + $a_f >>>> #set $cloudbase = $cloudbase_format % $cloudbase >>>> #else >>>> #set $cloudbase = 'N/A' >>>> #end if >>>> ## >>>> ## calculate the wind run for the day >>>> ## FIXME: this is an approximation since averages are per-hour >>>> #set $t = time.localtime($ts) >>>> #set $windrun = 0 >>>> #for $n in range($t[3]) >>>> #set $ago = $hours_ago(hours_ago=$n).windSpeed.avg.raw >>>> #if $ago is not None >>>> #set $windrun = $windrun + $ago >>>> #end if >>>> #end for >>>> #if $unit.unit_type.windSpeed == 'meter_per_second' >>>> #set $windrun = $windrun / 3.6 >>>> #end if >>>> #set $windrun = $windrun_format % $windrun >>>> ## >>>> ## calulate solar max >>>> ## Ryan-Stolzenbach, MIT 1972 formula >>>> ## http://www.ecy.wa.gov/programs/eap/models.html >>>> ## >>>> ## el - solar elevation in decimal degrees >>>> ## R - distance from earth to sun in AU >>>> ## atc - atmospheric transmission coefficient (0.70-0.91) >>>> ## z - elevation in meters >>>> ## >>>> #if $almanac.hasExtras >>>> #set $rs_el = $almanac.sun.alt >>>> #set $rs_R = $almanac.sun.earth_distance >>>> #set $rs_atc = 0.8 >>>> #set $rs_z = $station.altitude.meter.raw >>>> #set $rs_nrel = 1367.0 >>>> #set $rs_sinel = math.sin($rs_el * math.pi / 180.0) >>>> #if $rs_z is not None and $rs_R is not None >>>> #if $rs_sinel < 0 >>>> #set $solarMax = 0 >>>> #else >>>> #set $rs_rm = >>>> math.pow((288.0-0.0065*$rs_z)/288.0,5.256)/($rs_sinel+0.15*math.pow($rs_el+3.885,-1.253)) >>>> #set $rs_toa = $rs_nrel * $rs_sinel / ($rs_R * $rs_R) >>>> #set $solarMax = $rs_toa * math.pow($rs_atc, $rs_rm) >>>> #end if >>>> #set $solarMax = $radiation_format % $solarMax >>>> #else >>>> #set $solarMax = 'N/A' >>>> #end if >>>> #else >>>> #set $solarMax = 'N/A' >>>> #end if >>>> ## >>>> ## calculate today's highest beaufort based on wind speed in knots >>>> #if $varExists('day.windSpeed') and $day.windSpeed.max.raw is not None >>>> #if $unit.unit_type.windSpeed == 'mile_per_hour' >>>> #set $kts = $day.windSpeed.max.raw * 0.8689762 >>>> #elif $unit.unit_type.windSpeed == 'km_per_hour' >>>> #set $kts = $day.windSpeed.max.raw * 0.539956 >>>> #elif $unit.unit_type.windSpeed == 'meter_per_second' >>>> #set $kts = $day.windSpeed.max.raw * 1.943844 >>>> #elif $unit.unit_type.windSpeed == 'knot' >>>> #set $kts = $day.windSpeed.max.raw >>>> #else >>>> #set $kts = 0 >>>> #end if >>>> #if $kts < 1 >>>> #set $beaufort = 0 >>>> #elif $kts < 4 >>>> #set $beaufort = 1 >>>> #elif $kts < 7 >>>> #set $beaufort = 2 >>>> #elif $kts < 11 >>>> #set $beaufort = 3 >>>> #elif $kts < 17 >>>> #set $beaufort = 4 >>>> #elif $kts < 22 >>>> #set $beaufort = 5 >>>> #elif $kts < 28 >>>> #set $beaufort = 6 >>>> #elif $kts < 34 >>>> #set $beaufort = 7 >>>> #elif $kts < 41 >>>> #set $beaufort = 8 >>>> #elif $kts < 48 >>>> #set $beaufort = 9 >>>> #elif $kts < 56 >>>> #set $beaufort = 10 >>>> #elif $kts < 64 >>>> #set $beaufort = 11 >>>> #else >>>> #set $beaufort = 12 >>>> #end if >>>> #else >>>> #set $beaufort = 'N/A' >>>> #end if >>>> ## >>>> ## if forecasting is installed, report the Zambretti forecast >>>> #if $varExists('forecast.zambretti') >>>> #set $fc = $forecast.label('Zambretti', $forecast.zambretti.code) >>>> #else >>>> #set $fc = 'forecast is not available' >>>> #end if >>>> ## >>>> #set $periods = $forecast.weather_periods('WU') >>>> #set $WU_ICON_LABELS = ["Tornado","Tropical Storm","Hurricane","Strong >>>> Storms","Thunderstorms","Rain / Snow","Rain / Sleet","Wintry >>>> Mix","Freezing >>>> Drizzle","Drizzle","Freezing Rain","Showers","Rain","Flurries","Snow >>>> Showers","Blowing / Drifting Snow","Snow","Hail","Sleet","Blowing Dust / >>>> Sandstorm","Foggy","Haze","Smoke","Breezy","Windy","Frigid / Ice >>>> Crystals","Cloudy","Mostly Cloudy","Mostly Cloudy","Partly Cloudy","Partly >>>> Cloudy","Clear","Sunny","Fair / Mostly Clear","Fair / Mostly Sunny","Mixed >>>> Rain and Hail","Hot","Isolated Thunderstorms","Scattered >>>> Thunderstorms","Scattered Showers","Heavy Rain","Scattered Snow >>>> Showers","Heavy Snow","Blizzard","Not Available (N/A)","Scattered >>>> Showers","Scattered Snow Showers","Scattered Thunderstorms"] >>>> >>>> #if len($periods) > 0 >>>> #set $wts = '' >>>> #set $wloc = '' >>>> #set $fc = '' >>>> #set $Loops = 0 >>>> #for $period in $periods >>>> #set $wts = $period.issued_ts >>>> #set $wloc = $period.location >>>> #if $period.event_ts is not None >>>> #set $fc +=$period.event_ts.string('') + ' ' >>>> #end if >>>> #if $period.temp is not None >>>> #set $fc += $period.temp.string('') + ' ' >>>> #end if >>>> #if $period.clouds is None >>>> #set $fc += 'N/A' >>>> #else >>>> #set $fc += $WU_ICON_LABELS[int($period.clouds)] >>>> ##set $fc += $period.clouds >>>> #end if >>>> #set $fc += ' ' >>>> #if $Loops > 10 >>>> #break >>>> #else >>>> #set $Loops += 1 >>>> #end if >>>> #end for >>>> #else >>>> #set $fc='No forecast available' >>>> #end if >>>> ## >>>> #set $_trend = $trend(time_delta=3600).outTemp.raw >>>> #if $_trend is None >>>> #set $_trend = 0 >>>> #end if >>>> #set $t_trend = $temp_format % $_trend >>>> ## >>>> #set $_trend = $trend(time_delta=10800).barometer.raw >>>> #if $_trend is None >>>> #set $_trend = 0 >>>> #end if >>>> #set $p_trend = $press_format % $_trend >>>> ## >>>> ## Set consistent units of measure >>>> ## Pressure UoM >>>> #set $UOM_bar = $unit.unit_type.barometer >>>> #if $UOM_bar == 'mbar' >>>> #set $UOM_bar = 'mb' >>>> #end if >>>> ## >>>> ## Temperature UoM >>>> #if $unit.unit_type.outTemp == 'degree_F' >>>> #set $UOM_temp = 'F' >>>> #else >>>> #set $UOM_temp = 'C' >>>> #end if >>>> ## >>>> ## Windspeed UoM >>>> #if $unit.unit_type.windSpeed == 'mile_per_hour' >>>> #set $UOM_wind = 'mph' >>>> #elif $unit.unit_type.windSpeed == 'km_per_hour' >>>> #set $UOM_wind = 'km/h' >>>> #elif $unit.unit_type.windSpeed == 'knot' >>>> #set $UOM_wind = 'kts' >>>> #elif $unit.unit_type.windSpeed == 'meter_per_second' >>>> #set $UOM_wind = 'm/s' >>>> #end if >>>> ## >>>> ## Rain UoM >>>> #set $rain_mult = 1 >>>> #set $UOM_rain = $unit.unit_type.rain >>>> #if $unit.unit_type.rain == 'inch' >>>> #set $UOM_rain = 'in' >>>> #elif $unit.unit_type.rain == 'cm' >>>> ## Gauges do not handle cm, convert to mm >>>> #set $UOM_rain = 'mm' >>>> #set $rain_mult = 10 >>>> #end if >>>> #if $day.rain.sum.has_data >>>> #set $day_rain = $rain_format % ($day.rain.sum.raw * $rain_mult) >>>> #else >>>> #set $day_rain = 0.0 >>>> #end if >>>> #if $current.rainRate.raw is not None >>>> #set $current_rainrate = $rainrate_format % ($current.rainRate.raw * >>>> $rain_mult) >>>> #else >>>> #set $current_rainrate = 0.0 >>>> #end if >>>> #if $day.rainRate.max.has_data >>>> #set $day_rainrate_max = $rainrate_format % ($day.rainRate.max.raw * >>>> $rain_mult) >>>> #else >>>> #set $day_rainrate_max = 0.0 >>>> #end if >>>> ## >>>> ## Today's High Hourly Rain >>>> #set $hourlyrainTH = 0 >>>> #set $ThourlyrainTH = '' >>>> #for $hour in $day.hours >>>> #if $hour.rain.sum.has_data and $hour.rain.sum.raw > $hourlyrainTH >>>> #set $hourlyrainTH = $hour.rain.sum.raw >>>> #set $ThourlyrainTH = $hour.dateTime.format("%H:%M") >>>> #end if >>>> #end for >>>> #set $hourlyrainTH = $hourlyrainTH * $rain_mult >>>> #set $hourlyrainTH = $rain_format % $hourlyrainTH >>>> ## >>>> #set $Avg1hPM25 = $hour.pm2_5.max >>>> #set $Avg1hPM10 = $hour.pm10_0.max >>>> { >>>> "timeUTC":"$timeutc", >>>> "date":"$current.dateTime.format('%Y.%m.%d %H:%M')", >>>> "dateFormat":"y.m.d h:m", >>>> "SensorContactLost":"$sensorContactLost", >>>> "tempunit":"$UOM_temp", >>>> "windunit":"$UOM_wind", >>>> "pressunit":"$UOM_bar", >>>> "rainunit":"$UOM_rain", >>>> "cloudbaseunit":"ft", >>>> "temp":"$current.outTemp.formatted", >>>> "tempTL":"$day.outTemp.min.formatted", >>>> "tempTH":"$day.outTemp.max.formatted", >>>> "TtempTL":"$day.outTemp.mintime", >>>> "TtempTH":"$day.outTemp.maxtime", >>>> "temptrend":"$t_trend", >>>> "intemp":"$current.inTemp.formatted", >>>> "intempTL":"$day.inTemp.min.formatted", >>>> "intempTH":"$day.inTemp.max.formatted", >>>> "TintempTL":"$day.inTemp.mintime", >>>> "TintempTH":"$day.inTemp.maxtime", >>>> "hum":"$current.outHumidity.formatted", >>>> "humTL":"$day.outHumidity.min.formatted", >>>> "humTH":"$day.outHumidity.max.formatted", >>>> "ThumTL":"$day.outHumidity.mintime", >>>> "ThumTH":"$day.outHumidity.maxtime", >>>> "inhum":"$current.inHumidity.formatted", >>>> "dew":"$current.dewpoint.formatted", >>>> "dewpointTL":"$day.dewpoint.min.formatted", >>>> "dewpointTH":"$day.dewpoint.max.formatted", >>>> "TdewpointTL":"$day.dewpoint.mintime", >>>> "TdewpointTH":"$day.dewpoint.maxtime", >>>> "wchill":"$current.windchill.formatted", >>>> "wchillTL":"$day.windchill.min.formatted", >>>> "TwchillTL":"$day.windchill.mintime", >>>> "heatindex":"$current.heatindex.formatted", >>>> "heatindexTH":"$day.heatindex.max.formatted", >>>> "TheatindexTH":"$day.heatindex.maxtime", >>>> "apptemp":"$apptemp", >>>> "apptempTL":"0", >>>> "apptempTH":"0", >>>> "TapptempTL":"", >>>> "TapptempTH":"", >>>> "humidex":"$humidex", >>>> "press":"$current.barometer.formatted", >>>> "pressL":"$year.barometer.min.formatted", >>>> "pressH":"$year.barometer.max.formatted", >>>> "pressTL":"$day.barometer.min.formatted", >>>> "pressTH":"$day.barometer.max.formatted", >>>> "TpressTL":"$day.barometer.mintime", >>>> "TpressTH":"$day.barometer.maxtime", >>>> "presstrendval":"$p_trend", >>>> "rfall":"$day_rain", >>>> "rrate":"$current_rainrate", >>>> "rrateTM":"$day_rainrate_max", >>>> "TrrateTM":"$day.rainRate.maxtime", >>>> "hourlyrainTH":"$hourlyrainTH", >>>> "ThourlyrainTH":"$ThourlyrainTH", >>>> "LastRainTipISO":"2000-01-01 00:00", >>>> "wlatest":"$current.windGust.formatted", >>>> "wspeed":"$current.windSpeed.formatted", >>>> "windTM":"$day.windSpeed.max.formatted", >>>> "wgust":"$current.windGust.formatted", >>>> "wgustTM":"$day.windGust.max.formatted", >>>> "TwgustTM":"$day.windGust.maxtime", >>>> "bearing":"$current.windDir.formatted", >>>> "avgbearing":"$day.wind.vecdir.formatted", >>>> "bearingTM":"$day.wind.gustdir.formatted", >>>> "BearingRangeFrom10":"000", >>>> "BearingRangeTo10":"000", >>>> "domwinddir":"$day.wind.vecdir.ordinal_compass", >>>> "WindRoseData":[], >>>> "windrun":"$windrun", >>>> "Tbeaufort":"F$beaufort", >>>> "UV":"$current.UV", >>>> "UVTH":"$day.UV.max.formatted", >>>> "SolarRad":"$current.radiation.formatted", >>>> "SolarTM":"$day.radiation.max.formatted", >>>> "CurrentSolarMax":"$solarMax", >>>> "cloudbasevalue":"$cloudbase", >>>> "forecast":"$fc", >>>> "version":"$station.version", >>>> "build":"", >>>> "pm2_5":"$current.pm2_5.formatted", >>>> "pm10":"$current.pm10_0.formatted", >>>> "Avg1hPM25":"$Avg1hPM25", >>>> "Avg1hPM10":"$Avg1hPM10", >>>> "ver":"15" >>>> } >>>> >>>> On Wednesday, April 14, 2021 at 8:34:59 AM UTC+2 [email protected] >>>> wrote: >>>> >>>>> Hello, >>>>> >>>>> I admit I fell from my chair when trying your above sample, and seeing >>>>> the results. :). >>>>> The sample interestingly shows has_data = false, but pm2_5.avg gets >>>>> calculated. (you can check output, plus the ones I actually need there : >>>>> http://meteobron.ddns.net). >>>>> >>>>> However, when I add : >>>>> <snip> >>>>> ## >>>>> #set $Avg1hPM25 = $hour.pm2_5.max >>>>> #set $Avg1hPM10 = $hour.pm10_0.max >>>>> { >>>>> </snip> >>>>> to the gauge-data.txt.tmpl of my steal series template, the resulting >>>>> data is : >>>>> { "timeUTC":"2021,04,14,05,24,00", "date":"2021.04.14 07:24", >>>>> "dateFormat":"y.m.d h:m", "SensorContactLost":"0", "tempunit":"C", >>>>> "windunit":"km/h", "pressunit":"mb", "rainunit":"mm", >>>>> "cloudbaseunit":"ft", >>>>> "temp":"2.0", "tempTL":"1.9", "tempTH":"6.2", "TtempTL":"07:11:34 AM", >>>>> "TtempTH":"12:00:44 AM", "temptrend":"-0.5", "intemp":"20.2", >>>>> "intempTL":"18.4", "intempTH":"20.7", "TintempTL":"06:37:35 AM", >>>>> "TintempTH":"12:03:07 AM", "hum":"58", "humTL":"43", "humTH":"59", >>>>> "ThumTL":"12:00:44 AM", "ThumTH":"07:23:22 AM", "inhum":"40", >>>>> "dew":"-5.3", >>>>> "dewpointTL":"-5.9", "dewpointTH":"-5.1", "TdewpointTL":"04:54:51 AM", >>>>> "TdewpointTH":"01:38:07 AM", "wchill":"2.0", "wchillTL":"1.9", >>>>> "TwchillTL":"07:12:00 AM", "heatindex":"2.0", "heatindexTH":"4.4", >>>>> "TheatindexTH":"02:27:18 AM", "apptemp":"-0.6", "apptempTL":"0", >>>>> "apptempTH":"0", "TapptempTL":"", "TapptempTH":"", "humidex":"2.0", >>>>> "press":"1026.3", "pressL":"863.5", "pressH":"1181.0", >>>>> "pressTL":"1025.8", >>>>> "pressTH":"1026.7", "TpressTL":"03:45:59 AM", "TpressTH":"12:55:49 AM", >>>>> "presstrendval":"0.4", "rfall":"0.0", "rrate":"0.0", "rrateTM":"0.0", >>>>> "TrrateTM":"12:00:12 AM", "hourlyrainTH":"0.0", "ThourlyrainTH":"", >>>>> "LastRainTipISO":"2000-01-01 00:00", "wlatest":"0", "wspeed":"0", >>>>> "windTM":"4", "wgust":"0", "wgustTM":"9", "TwgustTM":"03:34:00 AM", >>>>> "bearing":" N/A", "avgbearing":"345", "bearingTM":" N/A", >>>>> "BearingRangeFrom10":"000", "BearingRangeTo10":"000", "domwinddir":"NNW", >>>>> "WindRoseData":[], "windrun":"1.4", "Tbeaufort":"F1", "UV":"0.0", >>>>> "UVTH":"0.0", "SolarRad":"9", "SolarTM":"10", "CurrentSolarMax":"7", >>>>> "cloudbasevalue":"3603", "forecast":"14-Apr-2021 19:00 0.6°C Fair / >>>>> Mostly Clear 15-Apr-2021 07:00 13.3°C Fair / Mostly Sunny >>>>> 15-Apr-2021 >>>>> 19:00 1.1°C Partly Cloudy 16-Apr-2021 07:00 13.9°C Partly >>>>> Cloudy >>>>> 16-Apr-2021 19:00 1.7°C Partly Cloudy 17-Apr-2021 07:00 14.4°C >>>>> Partly Cloudy 17-Apr-2021 19:00 3.9°C Partly Cloudy 18-Apr-2021 >>>>> 07:00 >>>>> 15.6°C Partly Cloudy 18-Apr-2021 19:00 3.9°C Partly Cloudy >>>>> 19-Apr-2021 07:00 17.8°C Partly Cloudy 19-Apr-2021 19:00 5.0°C >>>>> Partly Cloudy ", "version":"4.3.0", "build":"", "pm2_5":"1.233", >>>>> "pm10":"2.200", "Avg1hPM25":" N/A", "Avg1hPM10":" N/A", "ver":"15" } >>>>> >>>>> with my 2 PM measures showing as N/A. >>>>> >>>>> >>>>> >>>>> Many thanks again. >>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/0da2917e-573d-4937-9848-5e52fb262306n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/0da2917e-573d-4937-9848-5e52fb262306n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/b00504bd-de40-4f1b-af34-cdfe27b64065n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/b00504bd-de40-4f1b-af34-cdfe27b64065n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/88e7bcb4-ab23-409d-ae54-12fb956ea8ebn%40googlegroups.com.
