Hi, Just to close the issue, I moved the template statements relative to the pm measures to the beginning of the file, and I now have stable data readings.
Thank you for your help and looking into the matter. Regards, On Friday, June 25, 2021 at 6:30:54 PM UTC+2 [email protected] wrote: > Hello, > > I was a bit over-optimistic. After results in the hour summary for the 1st > few hours, they are now empty again. > > I will need to dig into this a bit more, and if I can't understand what > get's wrong, create a minimal repro. > > Regards, > > On Tuesday, June 22, 2021 at 11:11:22 PM UTC+2 [email protected] wrote: > >> Hello, >> >> It took a little while, but thank to a full reinstall, I have been able >> to fully reconfigure my weewx and I now have the expected summary hourly >> data. >> >> there was something messed in my install/ extension / own source code >> changes that messed things up. Now that everything has been cleaned, it >> work way better. >> >> Thank you again for your help. >> >> On Friday, April 16, 2021 at 3:16:31 AM UTC+2 [email protected] wrote: >> >>> Sure. You can send me a dump file, or anything else, to recreate it. >>> >>> On Thu, Apr 15, 2021 at 1:18 PM [email protected] <[email protected]> >>> wrote: >>> >>>> Ok, I will try setup a minimal repro skin. >>>> is mysql for the data table ok? >>>> >>>> On Thursday, April 15, 2021 at 1:02:48 AM UTC+2 [email protected] wrote: >>>> >>>>> I can only fix what I can reproduce and, so far, I have not been able >>>>> to. My apologies. If you can send me a simple template and database that >>>>> reproduces the problem, I'll go at it. >>>>> >>>>> >>>>> >>>>> On Tue, Apr 13, 2021 at 11:35 PM [email protected] <[email protected]> >>>>> wrote: >>>>> >>>>>> Below, is the full template file as google does not seem to allow me >>>>>> to attach a file to a post. >>>>>> >>>>>> ## template for json data to feed the steel series gauges >>>>>> ## $Id: gauge-data.txt.tmpl 1279 2015-03-01 15:49:03Z mwall $ >>>>>> ## by Matthew Wall on flight 868 ;) >>>>>> ## 31dec2014 >>>>>> ## Updated 25jan2015 by M Crossley, changed cloudbase: to >>>>>> cloudbasevalue: >>>>>> ## Updated 12jan2016 by M Crossley, fixes applied from here: >>>>>> https://groups.google.com/forum/#!topic/weewx-user/rDdSbzQWbFw >>>>>> ## Updated 12mar2016 by M Crossley, force pressure UoM mbar to mb. >>>>>> ## added UoM consitency from >>>>>> unit_type rather than labels which can be localised >>>>>> ## force rain in cm to mm as gauges >>>>>> do not currently handle cm's. >>>>>> ## Updated 04oct2016 by M Crossley, added changes from PR4 >>>>>> ## Updated 3Jun2020 by G Roderick, rain calculations now tolerate a >>>>>> station that does not provide rain data >>>>>> ## (as distinct from rain data that >>>>>> is 0) >>>>>> ## definitions for the tags can be found here: >>>>>> ## http://wiki.sandaysoft.com/a/Webtags >>>>>> ## >>>>>> ## the following fields are not directly available from weewx: >>>>>> ## >>>>>> ## ver:10? >>>>>> ## apptemp - calculated in this template >>>>>> ## apptempTL >>>>>> ## apptempTH >>>>>> ## TapptempTL >>>>>> ## TapptempTH >>>>>> ## humidex - calculated in this template >>>>>> ## forecast - calculated by forecasting module >>>>>> ## LastRainTipISO >>>>>> ## Tbeaufort - calculated by this template >>>>>> ## BearingRangeFrom10 - lowest clockwise bearing in last 10 minutes >>>>>> ## BearingRangeTo10 - highest clockwise bearing in last 10 minutes >>>>>> ## CurrentSolarMax - calculated in this template >>>>>> ## WindRoseData >>>>>> ## windrun - calculated in this template >>>>>> ## >>>>>> ## ver:12 >>>>>> ## cloudbasevalue - calculated in this template in feet >>>>>> ## cloudbaseunit - defined in this template as ft >>>>>> ## >>>>>> ## ver:13 >>>>>> ## changed UoMs >>>>>> ## >>>>>> #import math >>>>>> #import time >>>>>> ## >>>>>> ## get the time in formats that we need later >>>>>> #set $ts=float($current.dateTime.raw) >>>>>> #set $timeutc=time.strftime("%Y,%m,%d,%H,%M,%S", time.gmtime($ts)) >>>>>> ## >>>>>> ## get some formats for calculated obs >>>>>> #set $temp_format = $unit.format.outTemp >>>>>> #set $press_format = $unit.format.pressure >>>>>> #set $rain_format = $unit.format.rain >>>>>> #set $rainrate_format = $unit.format.rainRate >>>>>> #set $cloudbase_format = $unit.format.cloudbase >>>>>> #set $windrun_format = $unit.format.windrun >>>>>> #set $radiation_format = $unit.format.radiation >>>>>> ## >>>>>> ## see if the station has contact with the sensor >>>>>> #set $sensorContactLost = 0 >>>>>> #set $rxchk = $getVar('current.rxCheckPercent.raw', 100) >>>>>> #if $rxchk is not None and $rxchk == 0 >>>>>> #set $sensorContactLost = 1 >>>>>> #end if >>>>>> ## >>>>>> ## calculate humidex >>>>>> ## http://www.physlink.com/reference/weather.cfm >>>>>> #if $varExists('current.outTemp') and $current.outTemp.raw is not >>>>>> None and $varExists('current.dewpoint') and $current.dewpoint.raw is not >>>>>> None >>>>>> #set $oT_C = $current.outTemp.degree_C.raw >>>>>> #set $dp_K = $current.dewpoint.degree_C.raw + 273.16 >>>>>> #set $e = 6.11 * math.exp(5417.7530 * ((1/273.16) - 1/$dp_K)) >>>>>> #set $h = 0.5555 * ($e - 10.0) >>>>>> #if $h > 0 >>>>>> #set $humidex = $oT_C + $h >>>>>> #else >>>>>> #set $humidex = $oT_C >>>>>> #end if >>>>>> #if $unit.unit_type.outTemp == 'degree_F' >>>>>> #set $humidex = 32.0 + 1.8 * $humidex >>>>>> #end if >>>>>> #set $humidex = $temp_format % $humidex >>>>>> #else >>>>>> #set $humidex = 'N/A' >>>>>> #end if >>>>>> ## >>>>>> ## calculate apparent temperature >>>>>> ## >>>>>> ## http://www.bom.gov.au/info/thermal_stress/#atapproximation >>>>>> ## AT = Ta + 0.33*e - 0.70*ws - 4.00 >>>>>> ## where AT and Ta (air temperature) are deg-C, >>>>>> ## e is water vapor pressure >>>>>> ## ws is wind speed (m/s) at elevation of 10 meters >>>>>> ## e = rh / 100 * 6.105 * exp(17.27 * Ta / (237.7 + Ta)) >>>>>> ## rh is relative humidity >>>>>> ## >>>>>> ## http://www.ncdc.noaa.gov/societal-impacts/apparent-temp/ >>>>>> ## AT = -2.7 + 1.04*T + 2.0*e -0.65*v >>>>>> ## where AT and T (air temperature) are deg-C, >>>>>> ## e is vapor pressure in kPa, >>>>>> ## and v is 10m wind speed in m/sec >>>>>> ## >>>>>> #if $varExists('current.outTemp') and $current.outTemp.raw is not >>>>>> None and $varExists('current.outHumidity') and $current.outHumidity.raw >>>>>> is >>>>>> not None and $varExists('current.windSpeed') and $current.windSpeed.raw >>>>>> is >>>>>> not None >>>>>> #set $oT_C = $current.outTemp.degree_C.raw >>>>>> #set $rh = $current.outHumidity.raw >>>>>> #set $ws = $current.windSpeed.meter_per_second.raw >>>>>> #set $e = ($rh / 100) * 6.105 * math.exp(17.27 * $oT_C / (237.7 + >>>>>> $oT_C)) >>>>>> #set $apptemp = $oT_C + 0.33 * $e - 0.7 * $ws - 4.0 >>>>>> #if $unit.unit_type.outTemp == 'degree_F' >>>>>> #set $apptemp = 32.0 + 1.8 * $apptemp >>>>>> #end if >>>>>> #set $apptemp = $temp_format % $apptemp >>>>>> #else >>>>>> #set $apptemp = 'N/A' >>>>>> #end if >>>>>> ## >>>>>> ## calculate the cloud base in feet >>>>>> #if $varExists('current.outTemp') and $current.outTemp.raw is not >>>>>> None and $varExists('current.dewpoint') and $current.dewpoint.raw is not >>>>>> None >>>>>> #set $oT_F = $current.outTemp.degree_F.raw >>>>>> #set $dp_F = $current.dewpoint.degree_F.raw >>>>>> #set $a_f = $station.altitude.foot.raw >>>>>> #set $cloudbase = (($oT_F - $dp_F) / 4.4 * 1000) + $a_f >>>>>> #set $cloudbase = $cloudbase_format % $cloudbase >>>>>> #else >>>>>> #set $cloudbase = 'N/A' >>>>>> #end if >>>>>> ## >>>>>> ## calculate the wind run for the day >>>>>> ## FIXME: this is an approximation since averages are per-hour >>>>>> #set $t = time.localtime($ts) >>>>>> #set $windrun = 0 >>>>>> #for $n in range($t[3]) >>>>>> #set $ago = $hours_ago(hours_ago=$n).windSpeed.avg.raw >>>>>> #if $ago is not None >>>>>> #set $windrun = $windrun + $ago >>>>>> #end if >>>>>> #end for >>>>>> #if $unit.unit_type.windSpeed == 'meter_per_second' >>>>>> #set $windrun = $windrun / 3.6 >>>>>> #end if >>>>>> #set $windrun = $windrun_format % $windrun >>>>>> ## >>>>>> ## calulate solar max >>>>>> ## Ryan-Stolzenbach, MIT 1972 formula >>>>>> ## http://www.ecy.wa.gov/programs/eap/models.html >>>>>> ## >>>>>> ## el - solar elevation in decimal degrees >>>>>> ## R - distance from earth to sun in AU >>>>>> ## atc - atmospheric transmission coefficient (0.70-0.91) >>>>>> ## z - elevation in meters >>>>>> ## >>>>>> #if $almanac.hasExtras >>>>>> #set $rs_el = $almanac.sun.alt >>>>>> #set $rs_R = $almanac.sun.earth_distance >>>>>> #set $rs_atc = 0.8 >>>>>> #set $rs_z = $station.altitude.meter.raw >>>>>> #set $rs_nrel = 1367.0 >>>>>> #set $rs_sinel = math.sin($rs_el * math.pi / 180.0) >>>>>> #if $rs_z is not None and $rs_R is not None >>>>>> #if $rs_sinel < 0 >>>>>> #set $solarMax = 0 >>>>>> #else >>>>>> #set $rs_rm = >>>>>> math.pow((288.0-0.0065*$rs_z)/288.0,5.256)/($rs_sinel+0.15*math.pow($rs_el+3.885,-1.253)) >>>>>> #set $rs_toa = $rs_nrel * $rs_sinel / ($rs_R * $rs_R) >>>>>> #set $solarMax = $rs_toa * math.pow($rs_atc, $rs_rm) >>>>>> #end if >>>>>> #set $solarMax = $radiation_format % $solarMax >>>>>> #else >>>>>> #set $solarMax = 'N/A' >>>>>> #end if >>>>>> #else >>>>>> #set $solarMax = 'N/A' >>>>>> #end if >>>>>> ## >>>>>> ## calculate today's highest beaufort based on wind speed in knots >>>>>> #if $varExists('day.windSpeed') and $day.windSpeed.max.raw is not None >>>>>> #if $unit.unit_type.windSpeed == 'mile_per_hour' >>>>>> #set $kts = $day.windSpeed.max.raw * 0.8689762 >>>>>> #elif $unit.unit_type.windSpeed == 'km_per_hour' >>>>>> #set $kts = $day.windSpeed.max.raw * 0.539956 >>>>>> #elif $unit.unit_type.windSpeed == 'meter_per_second' >>>>>> #set $kts = $day.windSpeed.max.raw * 1.943844 >>>>>> #elif $unit.unit_type.windSpeed == 'knot' >>>>>> #set $kts = $day.windSpeed.max.raw >>>>>> #else >>>>>> #set $kts = 0 >>>>>> #end if >>>>>> #if $kts < 1 >>>>>> #set $beaufort = 0 >>>>>> #elif $kts < 4 >>>>>> #set $beaufort = 1 >>>>>> #elif $kts < 7 >>>>>> #set $beaufort = 2 >>>>>> #elif $kts < 11 >>>>>> #set $beaufort = 3 >>>>>> #elif $kts < 17 >>>>>> #set $beaufort = 4 >>>>>> #elif $kts < 22 >>>>>> #set $beaufort = 5 >>>>>> #elif $kts < 28 >>>>>> #set $beaufort = 6 >>>>>> #elif $kts < 34 >>>>>> #set $beaufort = 7 >>>>>> #elif $kts < 41 >>>>>> #set $beaufort = 8 >>>>>> #elif $kts < 48 >>>>>> #set $beaufort = 9 >>>>>> #elif $kts < 56 >>>>>> #set $beaufort = 10 >>>>>> #elif $kts < 64 >>>>>> #set $beaufort = 11 >>>>>> #else >>>>>> #set $beaufort = 12 >>>>>> #end if >>>>>> #else >>>>>> #set $beaufort = 'N/A' >>>>>> #end if >>>>>> ## >>>>>> ## if forecasting is installed, report the Zambretti forecast >>>>>> #if $varExists('forecast.zambretti') >>>>>> #set $fc = $forecast.label('Zambretti', $forecast.zambretti.code) >>>>>> #else >>>>>> #set $fc = 'forecast is not available' >>>>>> #end if >>>>>> ## >>>>>> #set $periods = $forecast.weather_periods('WU') >>>>>> #set $WU_ICON_LABELS = ["Tornado","Tropical >>>>>> Storm","Hurricane","Strong Storms","Thunderstorms","Rain / Snow","Rain / >>>>>> Sleet","Wintry Mix","Freezing Drizzle","Drizzle","Freezing >>>>>> Rain","Showers","Rain","Flurries","Snow Showers","Blowing / Drifting >>>>>> Snow","Snow","Hail","Sleet","Blowing Dust / >>>>>> Sandstorm","Foggy","Haze","Smoke","Breezy","Windy","Frigid / Ice >>>>>> Crystals","Cloudy","Mostly Cloudy","Mostly Cloudy","Partly >>>>>> Cloudy","Partly >>>>>> Cloudy","Clear","Sunny","Fair / Mostly Clear","Fair / Mostly >>>>>> Sunny","Mixed >>>>>> Rain and Hail","Hot","Isolated Thunderstorms","Scattered >>>>>> Thunderstorms","Scattered Showers","Heavy Rain","Scattered Snow >>>>>> Showers","Heavy Snow","Blizzard","Not Available (N/A)","Scattered >>>>>> Showers","Scattered Snow Showers","Scattered Thunderstorms"] >>>>>> >>>>>> #if len($periods) > 0 >>>>>> #set $wts = '' >>>>>> #set $wloc = '' >>>>>> #set $fc = '' >>>>>> #set $Loops = 0 >>>>>> #for $period in $periods >>>>>> #set $wts = $period.issued_ts >>>>>> #set $wloc = $period.location >>>>>> #if $period.event_ts is not None >>>>>> #set $fc +=$period.event_ts.string('') + ' ' >>>>>> #end if >>>>>> #if $period.temp is not None >>>>>> #set $fc += $period.temp.string('') + ' ' >>>>>> #end if >>>>>> #if $period.clouds is None >>>>>> #set $fc += 'N/A' >>>>>> #else >>>>>> #set $fc += $WU_ICON_LABELS[int($period.clouds)] >>>>>> ##set $fc += $period.clouds >>>>>> #end if >>>>>> #set $fc += ' ' >>>>>> #if $Loops > 10 >>>>>> #break >>>>>> #else >>>>>> #set $Loops += 1 >>>>>> #end if >>>>>> #end for >>>>>> #else >>>>>> #set $fc='No forecast available' >>>>>> #end if >>>>>> ## >>>>>> #set $_trend = $trend(time_delta=3600).outTemp.raw >>>>>> #if $_trend is None >>>>>> #set $_trend = 0 >>>>>> #end if >>>>>> #set $t_trend = $temp_format % $_trend >>>>>> ## >>>>>> #set $_trend = $trend(time_delta=10800).barometer.raw >>>>>> #if $_trend is None >>>>>> #set $_trend = 0 >>>>>> #end if >>>>>> #set $p_trend = $press_format % $_trend >>>>>> ## >>>>>> ## Set consistent units of measure >>>>>> ## Pressure UoM >>>>>> #set $UOM_bar = $unit.unit_type.barometer >>>>>> #if $UOM_bar == 'mbar' >>>>>> #set $UOM_bar = 'mb' >>>>>> #end if >>>>>> ## >>>>>> ## Temperature UoM >>>>>> #if $unit.unit_type.outTemp == 'degree_F' >>>>>> #set $UOM_temp = 'F' >>>>>> #else >>>>>> #set $UOM_temp = 'C' >>>>>> #end if >>>>>> ## >>>>>> ## Windspeed UoM >>>>>> #if $unit.unit_type.windSpeed == 'mile_per_hour' >>>>>> #set $UOM_wind = 'mph' >>>>>> #elif $unit.unit_type.windSpeed == 'km_per_hour' >>>>>> #set $UOM_wind = 'km/h' >>>>>> #elif $unit.unit_type.windSpeed == 'knot' >>>>>> #set $UOM_wind = 'kts' >>>>>> #elif $unit.unit_type.windSpeed == 'meter_per_second' >>>>>> #set $UOM_wind = 'm/s' >>>>>> #end if >>>>>> ## >>>>>> ## Rain UoM >>>>>> #set $rain_mult = 1 >>>>>> #set $UOM_rain = $unit.unit_type.rain >>>>>> #if $unit.unit_type.rain == 'inch' >>>>>> #set $UOM_rain = 'in' >>>>>> #elif $unit.unit_type.rain == 'cm' >>>>>> ## Gauges do not handle cm, convert to mm >>>>>> #set $UOM_rain = 'mm' >>>>>> #set $rain_mult = 10 >>>>>> #end if >>>>>> #if $day.rain.sum.has_data >>>>>> #set $day_rain = $rain_format % ($day.rain.sum.raw * $rain_mult) >>>>>> #else >>>>>> #set $day_rain = 0.0 >>>>>> #end if >>>>>> #if $current.rainRate.raw is not None >>>>>> #set $current_rainrate = $rainrate_format % ($current.rainRate.raw * >>>>>> $rain_mult) >>>>>> #else >>>>>> #set $current_rainrate = 0.0 >>>>>> #end if >>>>>> #if $day.rainRate.max.has_data >>>>>> #set $day_rainrate_max = $rainrate_format % ($day.rainRate.max.raw * >>>>>> $rain_mult) >>>>>> #else >>>>>> #set $day_rainrate_max = 0.0 >>>>>> #end if >>>>>> ## >>>>>> ## Today's High Hourly Rain >>>>>> #set $hourlyrainTH = 0 >>>>>> #set $ThourlyrainTH = '' >>>>>> #for $hour in $day.hours >>>>>> #if $hour.rain.sum.has_data and $hour.rain.sum.raw > $hourlyrainTH >>>>>> #set $hourlyrainTH = $hour.rain.sum.raw >>>>>> #set $ThourlyrainTH = $hour.dateTime.format("%H:%M") >>>>>> #end if >>>>>> #end for >>>>>> #set $hourlyrainTH = $hourlyrainTH * $rain_mult >>>>>> #set $hourlyrainTH = $rain_format % $hourlyrainTH >>>>>> ## >>>>>> #set $Avg1hPM25 = $hour.pm2_5.max >>>>>> #set $Avg1hPM10 = $hour.pm10_0.max >>>>>> { >>>>>> "timeUTC":"$timeutc", >>>>>> "date":"$current.dateTime.format('%Y.%m.%d %H:%M')", >>>>>> "dateFormat":"y.m.d h:m", >>>>>> "SensorContactLost":"$sensorContactLost", >>>>>> "tempunit":"$UOM_temp", >>>>>> "windunit":"$UOM_wind", >>>>>> "pressunit":"$UOM_bar", >>>>>> "rainunit":"$UOM_rain", >>>>>> "cloudbaseunit":"ft", >>>>>> "temp":"$current.outTemp.formatted", >>>>>> "tempTL":"$day.outTemp.min.formatted", >>>>>> "tempTH":"$day.outTemp.max.formatted", >>>>>> "TtempTL":"$day.outTemp.mintime", >>>>>> "TtempTH":"$day.outTemp.maxtime", >>>>>> "temptrend":"$t_trend", >>>>>> "intemp":"$current.inTemp.formatted", >>>>>> "intempTL":"$day.inTemp.min.formatted", >>>>>> "intempTH":"$day.inTemp.max.formatted", >>>>>> "TintempTL":"$day.inTemp.mintime", >>>>>> "TintempTH":"$day.inTemp.maxtime", >>>>>> "hum":"$current.outHumidity.formatted", >>>>>> "humTL":"$day.outHumidity.min.formatted", >>>>>> "humTH":"$day.outHumidity.max.formatted", >>>>>> "ThumTL":"$day.outHumidity.mintime", >>>>>> "ThumTH":"$day.outHumidity.maxtime", >>>>>> "inhum":"$current.inHumidity.formatted", >>>>>> "dew":"$current.dewpoint.formatted", >>>>>> "dewpointTL":"$day.dewpoint.min.formatted", >>>>>> "dewpointTH":"$day.dewpoint.max.formatted", >>>>>> "TdewpointTL":"$day.dewpoint.mintime", >>>>>> "TdewpointTH":"$day.dewpoint.maxtime", >>>>>> "wchill":"$current.windchill.formatted", >>>>>> "wchillTL":"$day.windchill.min.formatted", >>>>>> "TwchillTL":"$day.windchill.mintime", >>>>>> "heatindex":"$current.heatindex.formatted", >>>>>> "heatindexTH":"$day.heatindex.max.formatted", >>>>>> "TheatindexTH":"$day.heatindex.maxtime", >>>>>> "apptemp":"$apptemp", >>>>>> "apptempTL":"0", >>>>>> "apptempTH":"0", >>>>>> "TapptempTL":"", >>>>>> "TapptempTH":"", >>>>>> "humidex":"$humidex", >>>>>> "press":"$current.barometer.formatted", >>>>>> "pressL":"$year.barometer.min.formatted", >>>>>> "pressH":"$year.barometer.max.formatted", >>>>>> "pressTL":"$day.barometer.min.formatted", >>>>>> "pressTH":"$day.barometer.max.formatted", >>>>>> "TpressTL":"$day.barometer.mintime", >>>>>> "TpressTH":"$day.barometer.maxtime", >>>>>> "presstrendval":"$p_trend", >>>>>> "rfall":"$day_rain", >>>>>> "rrate":"$current_rainrate", >>>>>> "rrateTM":"$day_rainrate_max", >>>>>> "TrrateTM":"$day.rainRate.maxtime", >>>>>> "hourlyrainTH":"$hourlyrainTH", >>>>>> "ThourlyrainTH":"$ThourlyrainTH", >>>>>> "LastRainTipISO":"2000-01-01 00:00", >>>>>> "wlatest":"$current.windGust.formatted", >>>>>> "wspeed":"$current.windSpeed.formatted", >>>>>> "windTM":"$day.windSpeed.max.formatted", >>>>>> "wgust":"$current.windGust.formatted", >>>>>> "wgustTM":"$day.windGust.max.formatted", >>>>>> "TwgustTM":"$day.windGust.maxtime", >>>>>> "bearing":"$current.windDir.formatted", >>>>>> "avgbearing":"$day.wind.vecdir.formatted", >>>>>> "bearingTM":"$day.wind.gustdir.formatted", >>>>>> "BearingRangeFrom10":"000", >>>>>> "BearingRangeTo10":"000", >>>>>> "domwinddir":"$day.wind.vecdir.ordinal_compass", >>>>>> "WindRoseData":[], >>>>>> "windrun":"$windrun", >>>>>> "Tbeaufort":"F$beaufort", >>>>>> "UV":"$current.UV", >>>>>> "UVTH":"$day.UV.max.formatted", >>>>>> "SolarRad":"$current.radiation.formatted", >>>>>> "SolarTM":"$day.radiation.max.formatted", >>>>>> "CurrentSolarMax":"$solarMax", >>>>>> "cloudbasevalue":"$cloudbase", >>>>>> "forecast":"$fc", >>>>>> "version":"$station.version", >>>>>> "build":"", >>>>>> "pm2_5":"$current.pm2_5.formatted", >>>>>> "pm10":"$current.pm10_0.formatted", >>>>>> "Avg1hPM25":"$Avg1hPM25", >>>>>> "Avg1hPM10":"$Avg1hPM10", >>>>>> "ver":"15" >>>>>> } >>>>>> >>>>>> On Wednesday, April 14, 2021 at 8:34:59 AM UTC+2 [email protected] >>>>>> wrote: >>>>>> >>>>>>> Hello, >>>>>>> >>>>>>> I admit I fell from my chair when trying your above sample, and >>>>>>> seeing the results. :). >>>>>>> The sample interestingly shows has_data = false, but pm2_5.avg gets >>>>>>> calculated. (you can check output, plus the ones I actually need there >>>>>>> : >>>>>>> http://meteobron.ddns.net). >>>>>>> >>>>>>> However, when I add : >>>>>>> <snip> >>>>>>> ## >>>>>>> #set $Avg1hPM25 = $hour.pm2_5.max >>>>>>> #set $Avg1hPM10 = $hour.pm10_0.max >>>>>>> { >>>>>>> </snip> >>>>>>> to the gauge-data.txt.tmpl of my steal series template, the >>>>>>> resulting data is : >>>>>>> { "timeUTC":"2021,04,14,05,24,00", "date":"2021.04.14 07:24", >>>>>>> "dateFormat":"y.m.d h:m", "SensorContactLost":"0", "tempunit":"C", >>>>>>> "windunit":"km/h", "pressunit":"mb", "rainunit":"mm", >>>>>>> "cloudbaseunit":"ft", >>>>>>> "temp":"2.0", "tempTL":"1.9", "tempTH":"6.2", "TtempTL":"07:11:34 AM", >>>>>>> "TtempTH":"12:00:44 AM", "temptrend":"-0.5", "intemp":"20.2", >>>>>>> "intempTL":"18.4", "intempTH":"20.7", "TintempTL":"06:37:35 AM", >>>>>>> "TintempTH":"12:03:07 AM", "hum":"58", "humTL":"43", "humTH":"59", >>>>>>> "ThumTL":"12:00:44 AM", "ThumTH":"07:23:22 AM", "inhum":"40", >>>>>>> "dew":"-5.3", >>>>>>> "dewpointTL":"-5.9", "dewpointTH":"-5.1", "TdewpointTL":"04:54:51 AM", >>>>>>> "TdewpointTH":"01:38:07 AM", "wchill":"2.0", "wchillTL":"1.9", >>>>>>> "TwchillTL":"07:12:00 AM", "heatindex":"2.0", "heatindexTH":"4.4", >>>>>>> "TheatindexTH":"02:27:18 AM", "apptemp":"-0.6", "apptempTL":"0", >>>>>>> "apptempTH":"0", "TapptempTL":"", "TapptempTH":"", "humidex":"2.0", >>>>>>> "press":"1026.3", "pressL":"863.5", "pressH":"1181.0", >>>>>>> "pressTL":"1025.8", >>>>>>> "pressTH":"1026.7", "TpressTL":"03:45:59 AM", "TpressTH":"12:55:49 AM", >>>>>>> "presstrendval":"0.4", "rfall":"0.0", "rrate":"0.0", "rrateTM":"0.0", >>>>>>> "TrrateTM":"12:00:12 AM", "hourlyrainTH":"0.0", "ThourlyrainTH":"", >>>>>>> "LastRainTipISO":"2000-01-01 00:00", "wlatest":"0", "wspeed":"0", >>>>>>> "windTM":"4", "wgust":"0", "wgustTM":"9", "TwgustTM":"03:34:00 AM", >>>>>>> "bearing":" N/A", "avgbearing":"345", "bearingTM":" N/A", >>>>>>> "BearingRangeFrom10":"000", "BearingRangeTo10":"000", >>>>>>> "domwinddir":"NNW", >>>>>>> "WindRoseData":[], "windrun":"1.4", "Tbeaufort":"F1", "UV":"0.0", >>>>>>> "UVTH":"0.0", "SolarRad":"9", "SolarTM":"10", "CurrentSolarMax":"7", >>>>>>> "cloudbasevalue":"3603", "forecast":"14-Apr-2021 19:00 0.6°C Fair >>>>>>> / >>>>>>> Mostly Clear 15-Apr-2021 07:00 13.3°C Fair / Mostly Sunny >>>>>>> 15-Apr-2021 >>>>>>> 19:00 1.1°C Partly Cloudy 16-Apr-2021 07:00 13.9°C Partly >>>>>>> Cloudy >>>>>>> 16-Apr-2021 19:00 1.7°C Partly Cloudy 17-Apr-2021 07:00 >>>>>>> 14.4°C >>>>>>> Partly Cloudy 17-Apr-2021 19:00 3.9°C Partly Cloudy 18-Apr-2021 >>>>>>> 07:00 >>>>>>> 15.6°C Partly Cloudy 18-Apr-2021 19:00 3.9°C Partly Cloudy >>>>>>> 19-Apr-2021 07:00 17.8°C Partly Cloudy 19-Apr-2021 19:00 >>>>>>> 5.0°C >>>>>>> Partly Cloudy ", "version":"4.3.0", "build":"", "pm2_5":"1.233", >>>>>>> "pm10":"2.200", "Avg1hPM25":" N/A", "Avg1hPM10":" N/A", "ver":"15" } >>>>>>> >>>>>>> with my 2 PM measures showing as N/A. >>>>>>> >>>>>>> >>>>>>> >>>>>>> Many thanks again. >>>>>>> >>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> >>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/0da2917e-573d-4937-9848-5e52fb262306n%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/weewx-user/0da2917e-573d-4937-9848-5e52fb262306n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/b00504bd-de40-4f1b-af34-cdfe27b64065n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/b00504bd-de40-4f1b-af34-cdfe27b64065n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/8274219a-a997-4dac-aa6c-9b65dda5112en%40googlegroups.com.
