After searching in the issue tracker on GitHub I found a similar problem
when running in wu-client mode. If I understood correctly it is a firmware
update on the weather station that requires a different path in its
settings. WeeWX logs looks correct at the moment. Will continue with
website setup to see if website generation and all other problems also are
solved now.
Konrad
måndag 2 augusti 2021 kl. 14:55:48 UTC+2 skrev Konrad Skeri Ekblad:
> Running WeeWX directly instead the output in /var/log/messages is this:
>
> Aug 2 14:36:59 localhost systemd[1]: Starting SYSV: start and stop the
> weewx weather system...
> Aug 2 14:36:59 localhost journal[2697]: weewx[2697] INFO __main__:
> Initializing weewx version 4.5.1
> Aug 2 14:36:59 localhost journal[2697]: weewx[2697] INFO __main__: Using
> Python 3.6.8 (default, Mar 19 2021, 05:13:41) #012[GCC 8.4.1 20200928 (Red
> Hat 8.4.1-1)]
> Aug 2 14:36:59 localhost journal[2697]: weewx[2697] INFO __main__:
> Platform Linux-4.18.0-305.10.2.el8_4.x86_64-x86_64-with-centos-8.4.2105
> Aug 2 14:36:59 localhost journal[2697]: weewx[2697] INFO __main__: Locale
> is 'sv_SE.UTF-8'
> Aug 2 14:36:59 localhost journal[2697]: weewx[2697] INFO __main__: PID
> file is /var/run/weewx.pid
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO __main__: Using
> configuration file /etc/weewx/weewx.conf
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO __main__: Debug
> is 1
> Aug 2 14:36:59 localhost weewx[2688]: Starting weewx: [ OK ]
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
> Loading station type Interceptor (user.interceptor)
> Aug 2 14:36:59 localhost systemd[1]: Started SYSV: start and stop the
> weewx weather system.
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO
> user.interceptor: driver version is 0.53
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO
> user.interceptor: device type: ecowitt-client
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO
> user.interceptor: mode is listen
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO
> user.interceptor: listen on :8000
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO
> user.interceptor: sensor map: {'pressure': 'pressure', 'barometer':
> 'barometer', 'outHumidity': 'humidity_out', 'inHumidity': 'humidity_in',
> 'outTemp': 'temperature_out', 'inTemp': 'temperature_in', 'windSpeed':
> 'wind_speed', 'windGust': 'wind_gust', 'windDir': 'wind_dir',
> 'windGustDir': 'wind_gust_dir', 'radiation': 'solar_radiation', 'dewpoint':
> 'dewpoint', 'windchill': 'windchill', 'rain': 'rain', 'rainRate':
> 'rain_rate', 'UV': 'uv', 'txBatteryStatus': 'battery', 'extraTemp1':
> 'temperature_1', 'extraTemp2': 'temperature_2', 'extraTemp3':
> 'temperature_3', 'extraHumid1': 'humidity_1', 'extraHumid2': 'humidity_2',
> 'soilTemp1': 'soil_temperature_1', 'soilTemp2': 'soil_temperature_2',
> 'soilMoist1': 'soil_moisture_1', 'soilMoist2': 'soil_moisture_2',
> 'soilMoist3': 'soil_moisture_3', 'soilMoist4': 'soil_moisture_4',
> 'leafWet1': 'leafwetness_1', 'leafWet2': 'leafwetness_2', 'pm2_5': 'pm2_5',
> 'extraTemp4': 'temperature_4', 'extraTemp5': 'temperature_5', 'extraTemp6':
> 'temperature_6', 'extraTemp7': 'temperature_7', 'extraTemp8':
> 'temperature_8', 'extraHumid3': 'humidity_3', 'extraHumid4': 'humidity_4',
> 'extraHumid5': 'humidity_5', 'extraHumid6': 'humidity_6', 'extraHumid7':
> 'humidity_7', 'extraHumid8': 'humidity_8', 'soilTemp3':
> 'soil_temperature_3', 'soilTemp4': 'soil_temperature_4'}
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
> StdConvert target unit is 0x1
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
> Archive will use data binding wx_binding
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
> Record generation will be attempted in 'hardware'
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
> Using archive interval of 300 seconds (specified in weewx configuration)
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.restx:
> StationRegistry: Registration not requested.
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.restx:
> Wunderground: Posting not enabled.
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.restx:
> PWSweather: Posting not enabled.
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.restx:
> CWOP: Posting not enabled.
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.restx:
> WOW: Posting not enabled.
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.restx:
> AWEKAS: Posting not enabled.
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO __main__:
> Starting up weewx version 4.5.1
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
> Using binding 'wx_binding' to database 'weewx.sdb'
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.manager:
> Starting backfill of daily summaries
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.manager:
> Daily summaries up to date
> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
> Starting main packet loop.
>
> After that there are no more log entries. Been running about 10 minutes
> now.
>
> systemctr status weewx gives the following info:
> ● weewx.service - SYSV: start and stop the weewx weather system
> Loaded: loaded (/etc/rc.d/init.d/weewx; generated)
> Active: active (running) since Mon 2021-08-02 14:36:59 CEST; 10min ago
> Docs: man:systemd-sysv-generator(8)
> Process: 2671 ExecStop=/etc/rc.d/init.d/weewx stop (code=exited,
> status=0/SUCCESS)
> Process: 2688 ExecStart=/etc/rc.d/init.d/weewx start (code=exited,
> status=0/SUCCESS)
> Tasks: 2 (limit: 11377)
> Memory: 13.5M
> CGroup: /system.slice/weewx.service
> └─2701 python3 /usr/share/weewx/weewxd --daemon
> --pidfile=/var/run/weewx.pid /etc/weewx/weewx.conf
>
> aug 02 14:45:29 localhost.localdomain python3[2701]: weewx[2701] DEBUG
> user.interceptor: empty queue
> aug 02 14:45:39 localhost.localdomain python3[2701]: weewx[2701] DEBUG
> user.interceptor: empty queue
> aug 02 14:45:49 localhost.localdomain python3[2701]: weewx[2701] DEBUG
> user.interceptor: empty queue
> aug 02 14:45:59 localhost.localdomain python3[2701]: weewx[2701] DEBUG
> user.interceptor: empty queue
> aug 02 14:46:09 localhost.localdomain python3[2701]: weewx[2701] DEBUG
> user.interceptor: empty queue
> aug 02 14:46:19 localhost.localdomain python3[2701]: weewx[2701] DEBUG
> user.interceptor: empty queue
> aug 02 14:46:29 localhost.localdomain python3[2701]: weewx[2701] DEBUG
> user.interceptor: empty queue
> aug 02 14:46:39 localhost.localdomain python3[2701]: weewx[2701] DEBUG
> user.interceptor: empty queue
> aug 02 14:46:49 localhost.localdomain python3[2701]: weewx[2701] DEBUG
> user.interceptor: empty queue
> aug 02 14:46:59 localhost.localdomain python3[2701]: weewx[2701] DEBUG
> user.interceptor: empty queue
>
> According to Wireshark the weather station connects to WeeWX every minute,
> but receives the 400 error code.
> Stopping WeeWX, Wireshark now shows that the weather station instead of
> the SYN ACK response to the low level TCP handshake instead receives a RST
> ACK, indicating that the port now is closed for communication.
>
> Konrad
> måndag 2 augusti 2021 kl. 13:02:50 UTC+2 skrev gjr80:
>
>> Have a look in the other log files on your system, it should be there
>> somewhere. When running the interceptor driver directly the (WeeWX) logging
>> setup is somewhat abbreviated so it could be different to when WeeWX is run.
>>
>> Gary
>>
>> On Monday, 2 August 2021 at 20:47:01 UTC+10 Konrad Skeri Ekblad wrote:
>>
>>> If I start WeeXW (still using simulator driver) I get its log messages
>>> in /var/log/messages, however, running the interceptor driver directly does
>>> not produce any output in this log file.
>>>
>>> Konrad
>>>
>>> måndag 2 augusti 2021 kl. 12:22:05 UTC+2 skrev gjr80:
>>>
>>>> When you just ran the interceptor driver directly there should have
>>>> been output to the console as well as log output in the WeeWX log, not
>>>> sure
>>>> what log file it will be in as I am not a Centos user. Can you please post
>>>> the log output exactly as it appears in the log.
>>>>
>>>> Gary
>>>>
>>>> On Monday, 2 August 2021 at 19:17:12 UTC+10 Konrad Skeri Ekblad wrote:
>>>>
>>>>> I did a complete reinstallation of the server with Centos 8. Fresh
>>>>> install of WeeWX from repository using yum as described on web page.
>>>>> Installed interceptor driver according to set up instructions.
>>>>> Running PYTHONPATH=/usr/share/weewx python3 user/interceptor.py
>>>>> --debug --port=8000 --device=ecowitt-client for almost an hour only
>>>>> gives the following output:
>>>>>
>>>>> raw data:
>>>>> raw packet: {'dateTime': 1627891880, 'usUnits': 1}
>>>>> mapped packet: {'dateTime': 1627891880, 'usUnits': 1}
>>>>>
>>>>> Using Wireshark to monitor the network traffic I notice this:
>>>>> Weatherstation to WeeWX server:
>>>>> POST HTTP/1.1
>>>>> HOST: 192.168.129.10
>>>>> Connection: Close
>>>>> Content-Type: application/x-www-form-urlencoded
>>>>> Content-Length: 415
>>>>>
>>>>> PASSKEY=**replaced**&stationtype=EasyWeatherV1.6.0&dateutc=2021-08-02+08:11:21&tempinf=77.5&humidityin=42&baromrelin=29.894&baromabsin=29.374&tempf=59.9&humidity=76&winddir=25&windspeedmph=2.7&windgustmph=3.4&maxdailygust=6.9&rainratein=0.000&eventrainin=0.000&hourlyrainin=0.000&dailyrainin=0.000&weeklyrainin=0.000&monthlyrainin=0.000&totalrainin=53.673&solarradiation=355.26&uv=3&model=WS2900
>>>>>
>>>>> Response from WeeWX server:
>>>>> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
>>>>> "http://www.w3.org/TR/html4/strict.dtd";>
>>>>> <html>
>>>>> <head>
>>>>> <meta http-equiv="Content-Type"
>>>>> content="text/html;charset=utf-8">
>>>>> <title>Error response</title>
>>>>> </head>
>>>>> <body>
>>>>> <h1>Error response</h1>
>>>>> <p>Error code: 400</p>
>>>>> <p>Message: Bad HTTP/0.9 request type ('POST').</p>
>>>>> <p>Error code explanation: HTTPStatus.BAD_REQUEST - Bad
>>>>> request syntax or unsupported method.</p>
>>>>> </body>
>>>>> </html>
>>>>>
>>>>> According to WireShark there is this communication about once each
>>>>> minute, but I have only one entry in the terminal.
>>>>> onsdag 28 juli 2021 kl. 02:24:31 UTC+2 skrev gjr80:
>>>>>
>>>>>> You have changed many things in your setup and even though you appear
>>>>>> to have reverted to your original working configuration I would be
>>>>>> starting
>>>>>> from scratch as per the interceptor drive readme.I would be running the
>>>>>> driver directly and then making sure you use the —debug command line
>>>>>> option. Post the console output here. Let’s see where that gets us.
>>>>>>
>>>>>> Gary
>>>>>> On Wednesday, 28 July 2021 at 08:20:26 UTC+10 Konrad Skeri Ekblad
>>>>>> wrote:
>>>>>>
>>>>>>> I have been using weewx on a Raspberry Pi for about two years now.
>>>>>>> After my old Fine Offset died soon after I moved from pywws I bought a
>>>>>>> Eurochron WS2900 which I got running using the interceptor driver, and
>>>>>>> that
>>>>>>> worked fine until the weather station stopped giving temperature
>>>>>>> readings
>>>>>>> this winter. I was able to fix that last week (bad connector on the
>>>>>>> cable
>>>>>>> from the temperature sensor to the circuit board in the sensor array)
>>>>>>> but
>>>>>>> when I reconnected it to weewx I started to experience various odd
>>>>>>> things.
>>>>>>> The unit shows correct data on its display and sends data to weewx, and
>>>>>>> the
>>>>>>> webpages rendered by weewx are correct (e.g. temperature ranging
>>>>>>> between
>>>>>>> 16°C and 28°C the other day) but the temperatures sent to Windy (and
>>>>>>> others) by weewx varies from -2°C to 21°C for the same day. Thinking
>>>>>>> that
>>>>>>> there might be some API change or something during the half year my
>>>>>>> station
>>>>>>> was offline, and that I for some time have had thoughts of moving it to
>>>>>>> a
>>>>>>> virtual server on my ESXi station anyway, I set up a Centos 8 machine
>>>>>>> and
>>>>>>> installed weewx on it. Simulator works fine, but using the same
>>>>>>> interceptor
>>>>>>> settings as on my Raspberry Pi I don't get any data (IP updated in the
>>>>>>> weather station settings).
>>>>>>>
>>>>>>> Using
>>>>>>> PYTHONPATH=/usr/share/weewx python3 -m user.interceptor --debug
>>>>>>> --mode=listen --port=8000 --device=ecowitt-client
>>>>>>> I was able to once capture this after listening maybe one hour:
>>>>>>> raw data:
>>>>>>> raw packet: {'dateTime': 1627416663, 'usUnits': 1}
>>>>>>> mapped packet: {'dateTime': 1627416663, 'usUnits': 1}
>>>>>>> Yay! A timestamp!
>>>>>>>
>>>>>>> Trying to connect to port 8000 from another computer in the network
>>>>>>> shows that the port is open.
>>>>>>>
>>>>>>> Thinking there is some problem with the weather station I have
>>>>>>> reseted it, but no change. The device is by itself directly uploading
>>>>>>> to
>>>>>>> Weather Underground and some other sites, and that works.
>>>>>>>
>>>>>>> Frustrated I one again change the local IP the weather station
>>>>>>> should send data to to the Raspberry Pi, but now I don't get any data
>>>>>>> there
>>>>>>> at all.
>>>>>>>
>>>>>>> This is the interceptor settings of weewx.conf:
>>>>>>>
>>>>>>> …
>>>>>>> station_type = Interceptor
>>>>>>> …
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> [Interceptor]
>>>>>>> # This section is for the network traffic interceptor driver.
>>>>>>>
>>>>>>> # The driver to use:
>>>>>>> driver = user.interceptor
>>>>>>>
>>>>>>> # Specify the hardware device to capture. Options include:
>>>>>>> # acurite-bridge - acurite internet bridge, smarthub, or access
>>>>>>> # observer - fine offset WH2600/HP1000/HP1003, ambient WS2902
>>>>>>> # lw30x - oregon scientific LW301/LW302
>>>>>>> # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
>>>>>>> # wu-client - any hardware that uses the weather underground
>>>>>>> protocol
>>>>>>> # device_type = observer
>>>>>>> device_type = ecowitt-client
>>>>>>> port = 8000
>>>>>>>
>>>>>>>
>>>>>>> ##############################################################################
>>>>>>>
>>>>>>> I'm not sure what more is relevant logs to post.
>>>>>>> I see no dropped packages originating from the weather station in
>>>>>>> the firewall log.
>>>>>>>
>>>>>>> Does anyone have any idea how I should proceed or what I should try?
>>>>>>>
>>>>>>> regards
>>>>>>> Konrad Skeri Ekblad
>>>>>>>
>>>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/7eb6f5e0-b3fd-4bc2-ae56-17d1e5c6dee0n%40googlegroups.com.
