So it’s working now?
Gary
On Tuesday, 3 August 2021 at 05:29:47 UTC+10 Konrad Skeri Ekblad wrote:
> And for those who happen to stumble on this thread: Path must be set to
> /path?
>
> måndag 2 augusti 2021 kl. 21:28:42 UTC+2 skrev Konrad Skeri Ekblad:
>
>> After searching in the issue tracker on GitHub I found a similar problem
>> when running in wu-client mode. If I understood correctly it is a firmware
>> update on the weather station that requires a different path in its
>> settings. WeeWX logs looks correct at the moment. Will continue with
>> website setup to see if website generation and all other problems also are
>> solved now.
>>
>> Konrad
>>
>> måndag 2 augusti 2021 kl. 14:55:48 UTC+2 skrev Konrad Skeri Ekblad:
>>
>>> Running WeeWX directly instead the output in /var/log/messages is this:
>>>
>>> Aug 2 14:36:59 localhost systemd[1]: Starting SYSV: start and stop the
>>> weewx weather system...
>>> Aug 2 14:36:59 localhost journal[2697]: weewx[2697] INFO __main__:
>>> Initializing weewx version 4.5.1
>>> Aug 2 14:36:59 localhost journal[2697]: weewx[2697] INFO __main__:
>>> Using Python 3.6.8 (default, Mar 19 2021, 05:13:41) #012[GCC 8.4.1 20200928
>>> (Red Hat 8.4.1-1)]
>>> Aug 2 14:36:59 localhost journal[2697]: weewx[2697] INFO __main__:
>>> Platform Linux-4.18.0-305.10.2.el8_4.x86_64-x86_64-with-centos-8.4.2105
>>> Aug 2 14:36:59 localhost journal[2697]: weewx[2697] INFO __main__:
>>> Locale is 'sv_SE.UTF-8'
>>> Aug 2 14:36:59 localhost journal[2697]: weewx[2697] INFO __main__: PID
>>> file is /var/run/weewx.pid
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO __main__:
>>> Using configuration file /etc/weewx/weewx.conf
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO __main__:
>>> Debug is 1
>>> Aug 2 14:36:59 localhost weewx[2688]: Starting weewx: [ OK ]
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
>>> Loading station type Interceptor (user.interceptor)
>>> Aug 2 14:36:59 localhost systemd[1]: Started SYSV: start and stop the
>>> weewx weather system.
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO
>>> user.interceptor: driver version is 0.53
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO
>>> user.interceptor: device type: ecowitt-client
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO
>>> user.interceptor: mode is listen
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO
>>> user.interceptor: listen on :8000
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO
>>> user.interceptor: sensor map: {'pressure': 'pressure', 'barometer':
>>> 'barometer', 'outHumidity': 'humidity_out', 'inHumidity': 'humidity_in',
>>> 'outTemp': 'temperature_out', 'inTemp': 'temperature_in', 'windSpeed':
>>> 'wind_speed', 'windGust': 'wind_gust', 'windDir': 'wind_dir',
>>> 'windGustDir': 'wind_gust_dir', 'radiation': 'solar_radiation', 'dewpoint':
>>> 'dewpoint', 'windchill': 'windchill', 'rain': 'rain', 'rainRate':
>>> 'rain_rate', 'UV': 'uv', 'txBatteryStatus': 'battery', 'extraTemp1':
>>> 'temperature_1', 'extraTemp2': 'temperature_2', 'extraTemp3':
>>> 'temperature_3', 'extraHumid1': 'humidity_1', 'extraHumid2': 'humidity_2',
>>> 'soilTemp1': 'soil_temperature_1', 'soilTemp2': 'soil_temperature_2',
>>> 'soilMoist1': 'soil_moisture_1', 'soilMoist2': 'soil_moisture_2',
>>> 'soilMoist3': 'soil_moisture_3', 'soilMoist4': 'soil_moisture_4',
>>> 'leafWet1': 'leafwetness_1', 'leafWet2': 'leafwetness_2', 'pm2_5': 'pm2_5',
>>> 'extraTemp4': 'temperature_4', 'extraTemp5': 'temperature_5', 'extraTemp6':
>>> 'temperature_6', 'extraTemp7': 'temperature_7', 'extraTemp8':
>>> 'temperature_8', 'extraHumid3': 'humidity_3', 'extraHumid4': 'humidity_4',
>>> 'extraHumid5': 'humidity_5', 'extraHumid6': 'humidity_6', 'extraHumid7':
>>> 'humidity_7', 'extraHumid8': 'humidity_8', 'soilTemp3':
>>> 'soil_temperature_3', 'soilTemp4': 'soil_temperature_4'}
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
>>> StdConvert target unit is 0x1
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
>>> Archive will use data binding wx_binding
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
>>> Record generation will be attempted in 'hardware'
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
>>> Using archive interval of 300 seconds (specified in weewx configuration)
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.restx:
>>> StationRegistry: Registration not requested.
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.restx:
>>> Wunderground: Posting not enabled.
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.restx:
>>> PWSweather: Posting not enabled.
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.restx:
>>> CWOP: Posting not enabled.
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.restx:
>>> WOW: Posting not enabled.
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.restx:
>>> AWEKAS: Posting not enabled.
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO __main__:
>>> Starting up weewx version 4.5.1
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
>>> Using binding 'wx_binding' to database 'weewx.sdb'
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.manager:
>>> Starting backfill of daily summaries
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.manager:
>>> Daily summaries up to date
>>> Aug 2 14:36:59 localhost journal[2701]: weewx[2701] INFO weewx.engine:
>>> Starting main packet loop.
>>>
>>> After that there are no more log entries. Been running about 10 minutes
>>> now.
>>>
>>> systemctr status weewx gives the following info:
>>> ● weewx.service - SYSV: start and stop the weewx weather system
>>> Loaded: loaded (/etc/rc.d/init.d/weewx; generated)
>>> Active: active (running) since Mon 2021-08-02 14:36:59 CEST; 10min ago
>>> Docs: man:systemd-sysv-generator(8)
>>> Process: 2671 ExecStop=/etc/rc.d/init.d/weewx stop (code=exited,
>>> status=0/SUCCESS)
>>> Process: 2688 ExecStart=/etc/rc.d/init.d/weewx start (code=exited,
>>> status=0/SUCCESS)
>>> Tasks: 2 (limit: 11377)
>>> Memory: 13.5M
>>> CGroup: /system.slice/weewx.service
>>> └─2701 python3 /usr/share/weewx/weewxd --daemon
>>> --pidfile=/var/run/weewx.pid /etc/weewx/weewx.conf
>>>
>>> aug 02 14:45:29 localhost.localdomain python3[2701]: weewx[2701] DEBUG
>>> user.interceptor: empty queue
>>> aug 02 14:45:39 localhost.localdomain python3[2701]: weewx[2701] DEBUG
>>> user.interceptor: empty queue
>>> aug 02 14:45:49 localhost.localdomain python3[2701]: weewx[2701] DEBUG
>>> user.interceptor: empty queue
>>> aug 02 14:45:59 localhost.localdomain python3[2701]: weewx[2701] DEBUG
>>> user.interceptor: empty queue
>>> aug 02 14:46:09 localhost.localdomain python3[2701]: weewx[2701] DEBUG
>>> user.interceptor: empty queue
>>> aug 02 14:46:19 localhost.localdomain python3[2701]: weewx[2701] DEBUG
>>> user.interceptor: empty queue
>>> aug 02 14:46:29 localhost.localdomain python3[2701]: weewx[2701] DEBUG
>>> user.interceptor: empty queue
>>> aug 02 14:46:39 localhost.localdomain python3[2701]: weewx[2701] DEBUG
>>> user.interceptor: empty queue
>>> aug 02 14:46:49 localhost.localdomain python3[2701]: weewx[2701] DEBUG
>>> user.interceptor: empty queue
>>> aug 02 14:46:59 localhost.localdomain python3[2701]: weewx[2701] DEBUG
>>> user.interceptor: empty queue
>>>
>>> According to Wireshark the weather station connects to WeeWX every
>>> minute, but receives the 400 error code.
>>> Stopping WeeWX, Wireshark now shows that the weather station instead of
>>> the SYN ACK response to the low level TCP handshake instead receives a RST
>>> ACK, indicating that the port now is closed for communication.
>>>
>>> Konrad
>>> måndag 2 augusti 2021 kl. 13:02:50 UTC+2 skrev gjr80:
>>>
>>>> Have a look in the other log files on your system, it should be there
>>>> somewhere. When running the interceptor driver directly the (WeeWX)
>>>> logging
>>>> setup is somewhat abbreviated so it could be different to when WeeWX is
>>>> run.
>>>>
>>>> Gary
>>>>
>>>> On Monday, 2 August 2021 at 20:47:01 UTC+10 Konrad Skeri Ekblad wrote:
>>>>
>>>>> If I start WeeXW (still using simulator driver) I get its log messages
>>>>> in /var/log/messages, however, running the interceptor driver directly
>>>>> does
>>>>> not produce any output in this log file.
>>>>>
>>>>> Konrad
>>>>>
>>>>> måndag 2 augusti 2021 kl. 12:22:05 UTC+2 skrev gjr80:
>>>>>
>>>>>> When you just ran the interceptor driver directly there should have
>>>>>> been output to the console as well as log output in the WeeWX log, not
>>>>>> sure
>>>>>> what log file it will be in as I am not a Centos user. Can you please
>>>>>> post
>>>>>> the log output exactly as it appears in the log.
>>>>>>
>>>>>> Gary
>>>>>>
>>>>>> On Monday, 2 August 2021 at 19:17:12 UTC+10 Konrad Skeri Ekblad wrote:
>>>>>>
>>>>>>> I did a complete reinstallation of the server with Centos 8. Fresh
>>>>>>> install of WeeWX from repository using yum as described on web page.
>>>>>>> Installed interceptor driver according to set up instructions.
>>>>>>> Running PYTHONPATH=/usr/share/weewx python3 user/interceptor.py
>>>>>>> --debug --port=8000 --device=ecowitt-client for almost an hour only
>>>>>>> gives the following output:
>>>>>>>
>>>>>>> raw data:
>>>>>>> raw packet: {'dateTime': 1627891880, 'usUnits': 1}
>>>>>>> mapped packet: {'dateTime': 1627891880, 'usUnits': 1}
>>>>>>>
>>>>>>> Using Wireshark to monitor the network traffic I notice this:
>>>>>>> Weatherstation to WeeWX server:
>>>>>>> POST HTTP/1.1
>>>>>>> HOST: 192.168.129.10
>>>>>>> Connection: Close
>>>>>>> Content-Type: application/x-www-form-urlencoded
>>>>>>> Content-Length: 415
>>>>>>>
>>>>>>> PASSKEY=**replaced**&stationtype=EasyWeatherV1.6.0&dateutc=2021-08-02+08:11:21&tempinf=77.5&humidityin=42&baromrelin=29.894&baromabsin=29.374&tempf=59.9&humidity=76&winddir=25&windspeedmph=2.7&windgustmph=3.4&maxdailygust=6.9&rainratein=0.000&eventrainin=0.000&hourlyrainin=0.000&dailyrainin=0.000&weeklyrainin=0.000&monthlyrainin=0.000&totalrainin=53.673&solarradiation=355.26&uv=3&model=WS2900
>>>>>>>
>>>>>>> Response from WeeWX server:
>>>>>>> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
>>>>>>> "http://www.w3.org/TR/html4/strict.dtd";>
>>>>>>> <html>
>>>>>>> <head>
>>>>>>> <meta http-equiv="Content-Type"
>>>>>>> content="text/html;charset=utf-8">
>>>>>>> <title>Error response</title>
>>>>>>> </head>
>>>>>>> <body>
>>>>>>> <h1>Error response</h1>
>>>>>>> <p>Error code: 400</p>
>>>>>>> <p>Message: Bad HTTP/0.9 request type ('POST').</p>
>>>>>>> <p>Error code explanation: HTTPStatus.BAD_REQUEST - Bad
>>>>>>> request syntax or unsupported method.</p>
>>>>>>> </body>
>>>>>>> </html>
>>>>>>>
>>>>>>> According to WireShark there is this communication about once each
>>>>>>> minute, but I have only one entry in the terminal.
>>>>>>> onsdag 28 juli 2021 kl. 02:24:31 UTC+2 skrev gjr80:
>>>>>>>
>>>>>>>> You have changed many things in your setup and even though you
>>>>>>>> appear to have reverted to your original working configuration I would
>>>>>>>> be
>>>>>>>> starting from scratch as per the interceptor drive readme.I would be
>>>>>>>> running the driver directly and then making sure you use the —debug
>>>>>>>> command
>>>>>>>> line option. Post the console output here. Let’s see where that gets
>>>>>>>> us.
>>>>>>>>
>>>>>>>> Gary
>>>>>>>> On Wednesday, 28 July 2021 at 08:20:26 UTC+10 Konrad Skeri Ekblad
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> I have been using weewx on a Raspberry Pi for about two years now.
>>>>>>>>> After my old Fine Offset died soon after I moved from pywws I bought
>>>>>>>>> a
>>>>>>>>> Eurochron WS2900 which I got running using the interceptor driver,
>>>>>>>>> and that
>>>>>>>>> worked fine until the weather station stopped giving temperature
>>>>>>>>> readings
>>>>>>>>> this winter. I was able to fix that last week (bad connector on the
>>>>>>>>> cable
>>>>>>>>> from the temperature sensor to the circuit board in the sensor array)
>>>>>>>>> but
>>>>>>>>> when I reconnected it to weewx I started to experience various odd
>>>>>>>>> things.
>>>>>>>>> The unit shows correct data on its display and sends data to weewx,
>>>>>>>>> and the
>>>>>>>>> webpages rendered by weewx are correct (e.g. temperature ranging
>>>>>>>>> between
>>>>>>>>> 16°C and 28°C the other day) but the temperatures sent to Windy (and
>>>>>>>>> others) by weewx varies from -2°C to 21°C for the same day. Thinking
>>>>>>>>> that
>>>>>>>>> there might be some API change or something during the half year my
>>>>>>>>> station
>>>>>>>>> was offline, and that I for some time have had thoughts of moving it
>>>>>>>>> to a
>>>>>>>>> virtual server on my ESXi station anyway, I set up a Centos 8 machine
>>>>>>>>> and
>>>>>>>>> installed weewx on it. Simulator works fine, but using the same
>>>>>>>>> interceptor
>>>>>>>>> settings as on my Raspberry Pi I don't get any data (IP updated in
>>>>>>>>> the
>>>>>>>>> weather station settings).
>>>>>>>>>
>>>>>>>>> Using
>>>>>>>>> PYTHONPATH=/usr/share/weewx python3 -m user.interceptor --debug
>>>>>>>>> --mode=listen --port=8000 --device=ecowitt-client
>>>>>>>>> I was able to once capture this after listening maybe one hour:
>>>>>>>>> raw data:
>>>>>>>>> raw packet: {'dateTime': 1627416663, 'usUnits': 1}
>>>>>>>>> mapped packet: {'dateTime': 1627416663, 'usUnits': 1}
>>>>>>>>> Yay! A timestamp!
>>>>>>>>>
>>>>>>>>> Trying to connect to port 8000 from another computer in the
>>>>>>>>> network shows that the port is open.
>>>>>>>>>
>>>>>>>>> Thinking there is some problem with the weather station I have
>>>>>>>>> reseted it, but no change. The device is by itself directly uploading
>>>>>>>>> to
>>>>>>>>> Weather Underground and some other sites, and that works.
>>>>>>>>>
>>>>>>>>> Frustrated I one again change the local IP the weather station
>>>>>>>>> should send data to to the Raspberry Pi, but now I don't get any data
>>>>>>>>> there
>>>>>>>>> at all.
>>>>>>>>>
>>>>>>>>> This is the interceptor settings of weewx.conf:
>>>>>>>>>
>>>>>>>>> …
>>>>>>>>> station_type = Interceptor
>>>>>>>>> …
>>>>>>>>>
>>>>>>>>> ##############################################################################
>>>>>>>>>
>>>>>>>>> [Interceptor]
>>>>>>>>> # This section is for the network traffic interceptor driver.
>>>>>>>>>
>>>>>>>>> # The driver to use:
>>>>>>>>> driver = user.interceptor
>>>>>>>>>
>>>>>>>>> # Specify the hardware device to capture. Options include:
>>>>>>>>> # acurite-bridge - acurite internet bridge, smarthub, or
>>>>>>>>> access
>>>>>>>>> # observer - fine offset WH2600/HP1000/HP1003, ambient WS2902
>>>>>>>>> # lw30x - oregon scientific LW301/LW302
>>>>>>>>> # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
>>>>>>>>> # wu-client - any hardware that uses the weather underground
>>>>>>>>> protocol
>>>>>>>>> # device_type = observer
>>>>>>>>> device_type = ecowitt-client
>>>>>>>>> port = 8000
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ##############################################################################
>>>>>>>>>
>>>>>>>>> I'm not sure what more is relevant logs to post.
>>>>>>>>> I see no dropped packages originating from the weather station in
>>>>>>>>> the firewall log.
>>>>>>>>>
>>>>>>>>> Does anyone have any idea how I should proceed or what I should
>>>>>>>>> try?
>>>>>>>>>
>>>>>>>>> regards
>>>>>>>>> Konrad Skeri Ekblad
>>>>>>>>>
>>>>>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/d5159365-3eb4-43ca-9577-94ef5ec494d3n%40googlegroups.com.
