You need to change the MQTT uploader binding to ‘loop’. Refer to the ‘binding’ option description under ‘Options’ in the MQTT uploader readme - https://github.com/weewx/weewx/wiki/mqtt#options
Gary On Tuesday, 14 December 2021 at 07:50:18 UTC+10 [email protected] wrote: > I am running WeeWx on a Raspi 3B+ running Buster; Weewx version 4.3.0, > MQTT v 0.23. > > I have been running WeeWx for several years. In addition to publishing to > a couple of services I use the .csv file on a network server for in house > consumption of weather data. I have recently started converting MQTT, > publishing to an in-house MQTT server. I use this server for other > applications as well and it is very responsive with very low latency. > > The .csv file updates every few seconds but the MQTT data is only pushed > every few minutes. For some of the weather data this is adequate but I > would like to speed up the publishing rate for MQTT. How do I control > that; there does not seem to be an obvious way to control it? > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/55cb5ff2-29ec-485a-80e4-e39cb4d4214en%40googlegroups.com.
